Panasonic Sdr S150 Operating Instructions Manual

71VQT0X39
2Press the cursor button up, down, left 
or right to select a scene to be 
printed, then press the button in the 
center.
The number of pictures set is displayed.
3Press the cursor button up or down to 
select the desired number of prints, 
then press the button in the center.
≥You can set up to 9 prints.
≥The function can be canceled by setting the 
number of pictures to [0].
≥Up to 12 scenes displayed on a page can be 
set in succession by repeating steps 2 and 3.
4Press the menu button to...

72VQT0X39
7Use the cursor button to select 
[ PAGE LAYOUT], then press the 
cursor button right to enter the layout 
setting.
–STANDARD:Layout specific to the printer
–:No frame print
–:Frame print
≥You cannot set page layouts not supported on 
the printer.
8Use the cursor button to select 
[ PRINT], then press the cursor 
button right to select [YES]. The 
pictures are printed.
≥Exit PictBridge by disconnecting the USB 
cable (supplied) after the pictures have been 
printed.
When you stop printing...

73VQT0X39
Images recorded by this unit can be played back on a TV.
¬Insert an SD card with recordings into the unit.
1Open the terminal cover and then 
connect the multi cable (supplied) to 
the multi-connector terminal [MULTI] 
and the TV. 
1Multi cable (supplied)
Insert the plugs as far as they will go.
≥If the TV has an S-Video terminal, then also 
connect an S-Video plug. It allows you to 
enjoy more beautiful images. 
(You must also connect the Video/Audio input 
terminals.)
≥Use the AC adaptor to...

74VQT0X39
Connecting to a TV with a 4:3 TV aspect ratio
When motion pictures recorded with a 16:9 aspect ratio (the motion picture recording 
menu’s [WIDE] setting is [ON]) or still pictures recorded with the same aspect ratio (the 
still picture recording menu’s [PICTURE SIZE] setting is [HDTV]) are played back on a 
TV with a 4:3 aspect ratio, the images shown on the LCD monitor may be elongated 
vertically. In this case, you can play them back with their original aspect ratio by 
changing the menu...

75VQT0X39
To prevent accidental deleting of images recorded, or when the SD card is full, record 
the files on the SD card to the DVD recorder’s hard disk or DVD-RAM.
Depending on the type of DVD recorder or SD card used, it may not be possible to copy 
motion pictures (MPEG2) recorded with this unit onto a hard disk, etc. (P16)
≥For further details, refer to the operating instructions of the DVD recorder.
1Remove the SD card with the 
recorded images from this unit. (P15)
≥Set this unit’s power switch...

76VQT0X39
PC
When the CD-ROM (supplied) is inserted into the PC, the CD launcher starts.
Video editing software 
MotionSD STUDIO 1.1E
This software allows pictures to be acquired from this 
unit, edited and output.
You can also send a picture acquired from this unit by 
e-mail, and edited pictures can be written to the DVD 
drive.
For information about how to use MotionSD STUDIO 
1.1E, read the PDF operating instructions.
Web Camera Driver
USB Video Class Motion JPEG DriverrAudio Class Driver
When the...

77VQT0X39
≥Even if the system requirements mentioned in these operating instructions are 
fulfilled, some personal computers cannot be used.
≥This software is not compatible with Microsoft Windows 3.1, Windows 95, 
Windows 98, Windows Me and Windows NT.
≥Operation is not guaranteed on an upgraded OS.
≥Operation on an OS other than the one pre-installed is not guaranteed.
≥When 2 or more USB devices are connected to a PC, or when devices are 
connected through USB hubs or by using extension cables, proper...

78VQT0X39
Operating environment for MotionSD STUDIO 1.1E
(Video Editing Software)
MotionSD STUDIO 
≥This software is not compatible with a multi-boot environment.
≥This software is not compatible with a multi-CPU environment.
≥Operation is not guaranteed on Microsoft Windows XP Media Center Edition, Tablet 
PC Edition and not compatible with 64 bit operation systems.
With a PC (continued)
Personal computerIBM PC/AT compatible personal computer
OSMicrosoft Windows 2000 Professional Service Pack 4...

79VQT0X39
Operating environment for using the unit as a Web camera
Operating environment for the card reader function (mass storage)
Personal computerIBM PC/AT compatible personal computer
OSMicrosoft Windows 2000 Professional Service Pack 4
Microsoft Windows XP Home Edition Service Pack 1/2
Microsoft Windows XP Professional Service Pack 1/2
(The standard driver of OS is used after Windows XP Service Pack 
2.)
CPUIntel Pentium III 450 MHz or higher or Intel Celeron 400 MHz or 
higher
RAM128 MB or more...

80VQT0X39
≥Before attempting to start up the CD launcher, close all other software applications which 
are running.
≥Do not perform any other operations on your PC while MotionSD STUDIO is being 
installed.
1 Insert the CD-ROM into the PC.
The CD launcher starts.
(Refer to page 82 if the CD launcher fails to start 
automatically after the CD-ROM has been 
inserted into the PC.)
2 Click [MotionSD STUDIO 1.1E].
≥The software application may not run properly 
if you cancel the installation at any point e.g....