Panasonic Sdr S150 Operating Instructions Manual

91VQT0X39
∫If the driver has not been recognized properly
[!] or [Unknown device] appears at [USB (Universal Serial Bus) controller] or [Other 
devices], etc.
(Where the display will appear depends on the type of PC you are using.)
Disconnect the USB cable, uninstall then re-install the [Web Camera Driver] (P81) and 
connect the USB cable again.
In the following cases, the Web camera driver has not been installed properly.
≥When an exclamation [!] mark appears at [USB composite device] under [USB...

92VQT0X39
Details
Number of recordable pictures
∫Picture quality and number of recordable pictures
(using SD cards)
≥Usable capacity will be less.
≥The number of recordable pictures depends on whether [ ] and [ ] are used 
together and on the subject being recorded.
≥The numbers shown in the table are approximations.
Approximate Number of Recordable Pictures on 
an SD Card
Picture size (2048t1512) (1280t960)
Picture quality
8MB24 712
16 MB712 2032
32 MB18 28 45 73
64 MB38 61 96 155
128 MB75 120 185 300...

93VQT0X39
Motion picture recording 
menus
∫[ BASIC]
[ SCENE MODE] (P46)
[ WIND CUT] (P42)
[ REC MODE] (P35)
[ WIDE] (P43)
[ CLOCK SET] (P29)
∫[ ADVANCE]
[ D.ZOOM] (P38)
[ O.I.S.] (P44)
[MAGICPIX] (P45)
[ REC LAMP] (P33)
[ ZOOM MIC] (P38)
∫[ SETUP]
[ DISPLAY] (P95)
[ DATE/TIME] (P30)
[ DATE FORMAT] (P29)
[ FORMAT CARD] (P68)
[ QUICK START] (P19)
[ POWER SAVE] (P95)[ BEEP SOUND] (P95)
[LCDAI] (P31)
[LCDSET] (P30)
[ INITIAL SET] (P95)
[DEMOMODE] (P95)
Still picture recording 
menu
≥For [ SETUP] items, refer...

94VQT0X39
Motion picture playback 
menus
∫[ DELETE]
[ SELECT] (P65)
[ ALL] (P65)
∫[ PLAY SETUP]
[ PLAY MODE] (P62)
[ REPEAT PLAY] (P62)
[ RESUME PLAY] (P62)
[ LOCK] (P67)
∫[ SETUP]
[ DISPLAY] (P95)
[ DATE/TIME] (P30)
[ DATE FORMAT] (P29)
[ FORMAT CARD] (P68)
[ POWER SAVE] (P95)
[ BEEP SOUND] (P95)
[ LCD AI] (P31)
[ LCD SET] (P30)
[ TV ASPECT] (P74)
Still picture playback 
menus
≥For [ DELETE] and [ SETUP] 
items, refer to the motion picture 
playback menus.
∫[ PLAY SETUP]
[ PLAY MODE] (P62)
[LOCK] (P67)...

95VQT0X39
∫[ DISPLAY]
≥OFF≥ON
The screen indications are selected as 
shown in the illustration below.
∫[ BEEP SOUND]
≥OFF≥ON
This allows operations such as starting 
and ending recording to be signalled by a 
beep.
When [OFF] is set, no beep is heard 
when an operation such as recording is 
started or ended.
1 Beep
When you start recording or turn on the 
power. Also when deleting files, when the 
confirmation message appears while 
formatting and when this unit is 
recognized by the PC or the printer....

96VQT0X39
Recording indications
1 Motion picture recording2 Still picture recording
Indications
R   0h00m12R1700

 12:30 PM
DEC 15 2006
;0h00m00s;
 12:30 PM
DEC 15 2006
SPO.I.S.AUTOAUTOO.I.S.
Remaining battery power
R 0h00mRemaining time left for 
recording
0h00m00sTime code
12:30 PM
DEC 15 2006Date/Time indication
¥/; (Red) Recording
; (Green) Recording pause
Digital zoom
Auto mode
Manual mode
MFManual focus
2tZoom magnification 
indication
Backlight compensation
Image stabilizer
Powe r  L C D...

97VQT0X39
Playback indications
1 Motion picture playback2 Still picture playback
Confirmatory indications
12
R22
SETUP PLAYSETUP
PLAY
1/241/241/241/241/241/24
1Playback
;Pause
56Cue/Review playback
78Last/first file paused
9:Skip playback
D/ESlow motion playback
/Frame-by-frame playback
0h00m00sMotion picture playback time
Select playback
Volume adjustment
Slide show playback
100-0001Still picture folder/Scene 
number display
No. 10File number
When a printer compatible with 
PictBridge is connected...

98VQT0X39
Confirmatory indications
Indications (continued)
CANNOT RECORD.Data writing to the SD card has failed.
CHECK CARD.This card is not compatible or it cannot be recognized by 
the unit.
THIS CARD CANNOT 
RECORD IN VIDEO MODE.An 8 MB or 16 MB SD card has been inserted in motion 
picture recording mode.
CARD LOCKED.The write protection switch on the SD card is set to 
[LOCK]. (P16)
SCENE NUMBER IS FULL.The number of still pictures or motion picture scenes 
(program) that can be recorded on 1 card is...

99VQT0X39
PUSH THE RESET SWITCH.An irregularity in the equipment has been detected. 
Remove the SD card then press the reset switch to restart 
the unit. (P105)
CHANGE TO MANUAL 
MODE.You have set the [AUTO/MANUAL/FOCUS] switch to 
[AUTO] and are attempting to set [SCENE MODE] from 
the menu screen.
CANCEL MAGICPIX MODE.You are attempting to set [SCENE MODE] from the menu 
screen while MAGICPIX is set. (P45)
TURN OFF POWER LCD.You are attempting to set [LCD AI] from the menu screen 
when the [POWER LCD]...

100VQT0X39
∫About recoveryWhen the SD card was accessed, you tried to playback a file displayed as a thumbnail in 
shades of blue and white (P105) or faulty control information or a play list created on another 
device was read, a control information recovery message or play list delete message such as 
those shown below may be displayed. (After recovery starts, it may take time depending on 
the error.)
;
;
YES
When connecting to AC adaptor or the 
remaining capacity of the battery is 
enough:...