Panasonic Sdr S150 Operating Instructions Manual
Have a look at the manual Panasonic Sdr S150 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 56
56VQT0X39
Recording with a shutter operation effect
You can add a shutter operation simulating sound.
Press the menu button, then use the
cursor button to select [ ADVANCE]>
[ SHTR EFFECT]>[ON]. (P27)
∫About the shutter chance mark
≥The shutter chance mark does not appear in manual focus mode.
≥When the subject is not easily focused, focus on the subject manually. (P48)
≥You can record still pictures on the SD card even if the shutter chance mark does not
appear, but pictures may be recorded without...](http://img.usermanuals.tech/thumb/58/66032/w64_sdr-s150_en_om_d-55.png "Page 56
56VQT0X39
Recording with a shutter operation effect
You can add a shutter operation simulating sound.
Press the menu button, then use the
cursor button to select [ ADVANCE]>
[ SHTR EFFECT]>[ON]. (P27)
∫About the shutter chance mark
≥The shutter chance mark does not appear in manual focus mode.
≥When the subject is not easily focused, focus on the subject manually. (P48)
≥You can record still pictures on the SD card even if the shutter chance mark does not
appear, but pictures may be recorded without...")
![Page 57
57VQT0X39
Use the built-in flash in order to record still pictures in dark places.
¬Rotate the mode dial to select .
1Slide the [OPENß] flash lever.
The flash rises.
≥The flash will flash when the record button is
pressed.
Setting the flash mode
Press the menu button, then use the
cursor button to select
[ ADVANCE]>[ßFLASH] and then
select the desired setting. (P27)
–[ß]: Forced flash
–[ßA]: Auto
≥When [ßA] is set, the ambient brightness is
automatically detected, and only when the
flash is judged...](http://img.usermanuals.tech/thumb/58/66032/w64_sdr-s150_en_om_d-56.png "Page 57
57VQT0X39
Use the built-in flash in order to record still pictures in dark places.
¬Rotate the mode dial to select .
1Slide the [OPENß] flash lever.
The flash rises.
≥The flash will flash when the record button is
pressed.
Setting the flash mode
Press the menu button, then use the
cursor button to select
[ ADVANCE]>[ßFLASH] and then
select the desired setting. (P27)
–[ß]: Forced flash
–[ßA]: Auto
≥When [ßA] is set, the ambient brightness is
automatically detected, and only when the
flash is judged...")
![Page 58
58VQT0X39
To adjust the brightness of the flash
Press the menu button, use the cursor
button to select [ ADVANCE]>
[ FLASH LEVEL], then set the desired
brightness level. (P27)
–[ßj]: If the brightness is too high
([ßj] or [ßAj] indication will appear.)
–[ßd0]: In normal recording
([ß] or [ßA] indication will appear.)
–[ßi]: If the brightness is insufficient
([ßi] or [ßAi] indication will appear.)
Built-in flash (continued)
MENUSETUP ENTEREXIT
FLASH
RED EYE
REC LAMP ADVANCE
FLASH LEVEL1/2
O.I.S.
≥Do...](http://img.usermanuals.tech/thumb/58/66032/w64_sdr-s150_en_om_d-57.png "Page 58
58VQT0X39
To adjust the brightness of the flash
Press the menu button, use the cursor
button to select [ ADVANCE]>
[ FLASH LEVEL], then set the desired
brightness level. (P27)
–[ßj]: If the brightness is too high
([ßj] or [ßAj] indication will appear.)
–[ßd0]: In normal recording
([ß] or [ßA] indication will appear.)
–[ßi]: If the brightness is insufficient
([ßi] or [ßAi] indication will appear.)
Built-in flash (continued)
MENUSETUP ENTEREXIT
FLASH
RED EYE
REC LAMP ADVANCE
FLASH LEVEL1/2
O.I.S.
≥Do...")
![Page 59
59VQT0X39
You can record still pictures on an SD card using the timer.
¬Rotate the mode dial to select .
1Press the button in the center to
display the icon shown in the figure.
2Press the cursor button left to select
the [Ø] self-timer icon.
The [Ø10] icon flashes orange, then lights white.
≥Each time the left cursor button is pressed, the
indication changes by one setting in the
following order: [Ø
10]>[Ø2]>setting
canceled.
–Ø
10: Starts recording after 10 seconds
–Ø
2: Starts recording after 2...](http://img.usermanuals.tech/thumb/58/66032/w64_sdr-s150_en_om_d-58.png "Page 59
59VQT0X39
You can record still pictures on an SD card using the timer.
¬Rotate the mode dial to select .
1Press the button in the center to
display the icon shown in the figure.
2Press the cursor button left to select
the [Ø] self-timer icon.
The [Ø10] icon flashes orange, then lights white.
≥Each time the left cursor button is pressed, the
indication changes by one setting in the
following order: [Ø
10]>[Ø2]>setting
canceled.
–Ø
10: Starts recording after 10 seconds
–Ø
2: Starts recording after 2...")
![Page 62
62VQT0X39
Playing back motion pictures by date
1) Press the menu button, then use the
cursor button to select
[PLAYSETUP]#[PLAYMODE]#
[BY DATE]. (P27)
≥When [PLAY MODE] is set to [VIEW ALL],
all recorded motion pictures will be played
back in succession. ([ ALL] is displayed.)
2) Press the cursor button up or down to
select the date for playback, then press
the button in the center.
≥Once the playback of one motion picture is
started, any other motion pictures recorded
on the same day will then...](http://img.usermanuals.tech/thumb/58/66032/w64_sdr-s150_en_om_d-61.png "Page 62
62VQT0X39
Playing back motion pictures by date
1) Press the menu button, then use the
cursor button to select
[PLAYSETUP]#[PLAYMODE]#
[BY DATE]. (P27)
≥When [PLAY MODE] is set to [VIEW ALL],
all recorded motion pictures will be played
back in succession. ([ ALL] is displayed.)
2) Press the cursor button up or down to
select the date for playback, then press
the button in the center.
≥Once the playback of one motion picture is
started, any other motion pictures recorded
on the same day will then...")
![Page 64
64VQT0X39
Playing back still pictures as a slide show
Press the menu button, then use the
cursor button to select
[PLAYSETUP]#[PLAYMODE]#
[SLIDE SHOW]. (P27)
≥Still pictures will not be played as a slide show
when [PICTURE] is selected.
∫About still picture compatibility
≥This unit is compliant with the unified standard DCF (Design rule for Camera File
system) established by JEITA (Japan Electronics and Information Technology
Industries Association).
≥The file format supported by this unit is JPEG....](http://img.usermanuals.tech/thumb/58/66032/w64_sdr-s150_en_om_d-63.png "Page 64
64VQT0X39
Playing back still pictures as a slide show
Press the menu button, then use the
cursor button to select
[PLAYSETUP]#[PLAYMODE]#
[SLIDE SHOW]. (P27)
≥Still pictures will not be played as a slide show
when [PICTURE] is selected.
∫About still picture compatibility
≥This unit is compliant with the unified standard DCF (Design rule for Camera File
system) established by JEITA (Japan Electronics and Information Technology
Industries Association).
≥The file format supported by this unit is JPEG....")
![Page 65
65VQT0X39
The deleted scenes cannot be restored.
∫Deleting multiple files from the thumbnail display.
¬Rotate the mode dial to select or .
1Press the menu button, then use the
cursor button to select
[ DELETE]#[ SELECT] or
[ ALL]. (P27)
When [SELECT] is selected, the motion picture
or still picture scenes will be displayed as
thumbnails.
≥When [ALL] is selected, proceed to step 4.
2 (Only when [SELECT] is selected in step 1)
Use the cursor button to select the
scene to be deleted, then press the...](http://img.usermanuals.tech/thumb/58/66032/w64_sdr-s150_en_om_d-64.png "Page 65
65VQT0X39
The deleted scenes cannot be restored.
∫Deleting multiple files from the thumbnail display.
¬Rotate the mode dial to select or .
1Press the menu button, then use the
cursor button to select
[ DELETE]#[ SELECT] or
[ ALL]. (P27)
When [SELECT] is selected, the motion picture
or still picture scenes will be displayed as
thumbnails.
≥When [ALL] is selected, proceed to step 4.
2 (Only when [SELECT] is selected in step 1)
Use the cursor button to select the
scene to be deleted, then press the...")
![Page 66
66VQT0X39
∫Deleting scenes one at a time
¬Rotate the mode dial to select or .
1Press the [ ] button during
playback.
2When the confirmation message
appears, use the cursor button to
select [YES], then press the button in
the center.
≥To stop deleting, select [NO].
∫Deleting still picture files recorded on an SD card by other equipment
A still picture file (other than JPEG) that cannot be played back on this unit may be
erased.
Deleting scenes (continued)
DELETE SCENE?
SETUP ENTER
YES
NO
DELETE...](http://img.usermanuals.tech/thumb/58/66032/w64_sdr-s150_en_om_d-65.png "Page 66
66VQT0X39
∫Deleting scenes one at a time
¬Rotate the mode dial to select or .
1Press the [ ] button during
playback.
2When the confirmation message
appears, use the cursor button to
select [YES], then press the button in
the center.
≥To stop deleting, select [NO].
∫Deleting still picture files recorded on an SD card by other equipment
A still picture file (other than JPEG) that cannot be played back on this unit may be
erased.
Deleting scenes (continued)
DELETE SCENE?
SETUP ENTER
YES
NO
DELETE...")
61VQT0X39 Slow-motion playback The motion pictures will be played back at a speed approx. 1/5 the normal speed. 1) Press the cursor button up during motion picture playback to pause the playback. 2) Keep pressing the cursor button right. (Slow-motion pictures will be played back in reverse when you keep pressing the cursor button left.) ≥Normal playback is restored when the cursor button up is pressed. ≥The sound is muted during slow-motion playback. Frame-by-frame playback The motion picture is advanced one frame at a time. 1) Press the cursor button up during motion picture playback to pause the playback. 2) Press the cursor button right. (The frames will be advanced one at a time in the reverse direction when you press the cursor button left.) ≥Normal playback is restored when the cursor button up is pressed. To adjust volume Adjusting the speaker volume, or the headphone volume when using headphones (optional), during playback. Move the volume lever to change the volume level. –Towards [r]:increases the volume –Towards [s]:decreases the volume ≥The further the [ ] indication moves to the right (towards the “_” end), the higher the volume level becomes. ≥When the adjustment is completed, the volume indication will disappear. VQT0X39ENG.book 61 ページ ２００６年６月１４日 水曜日 午前１０時５１分
62VQT0X39 Playing back motion pictures by date 1) Press the menu button, then use the cursor button to select [PLAYSETUP]#[PLAYMODE]# [BY DATE]. (P27) ≥When [PLAY MODE] is set to [VIEW ALL], all recorded motion pictures will be played back in succession. ([ ALL] is displayed.) 2) Press the cursor button up or down to select the date for playback, then press the button in the center. ≥Once the playback of one motion picture is started, any other motion pictures recorded on the same day will then be played back in succession. ([ 01] etc. is displayed.) Repeat playback Press the menu button, then use the cursor button to select [PLAYSETUP]#[ REPEAT PLAY]# [ON]. (P27) The [ ] indication appears on the thumbnail and full screen views. ≥In order to cancel the repeat playback mode, set [REPEAT PLAY] to [OFF]. Resuming the previous playback Press the menu button, then use the cursor button to select [PLAYSETUP]#[RESUMEPLAY]# [ON]. (P27) ≥If playback of a motion picture is stopped, [R] appears on the thumbnail view of the stopped scene. ≥If playback is stopped at any point during a motion picture while [RESUME PLAY] is set to [OFF], the next time the motion picture is played back, it will be from the beginning. ≥[RESUME PLAY] is set to [OFF] if an SD card with the write protection switch at the [LOCK] position is inserted. (P16) ∫About motion picture mode compatibility≥This unit can play back MPEG2 formatted files. ≥This unit is based on the SD-Video standard. ≥ This unit may degrade or not play back motion pictures recorded or created on another product and another product may degrade or not play back motion pictures recorded on this unit. ≥Motion pictures less than approximately 2 seconds cannot be played back. ≥The thumbnails of motion pictures that cannot be played back are displayed in shades of blue and white. (P105) Motion picture playback (MPEG2 motion pictures) (continued) MENUSETUP ENTEREXIT PLAY MODE REPEAT PLAY PLAY SETUP VIEW ALL BY DATE RESUME PLAY LOCK MENUSETUPENTEREXIT VIEW BY DATE 01 DEC. 15. 2006 02 DEC. 16. 2006 MENUSETUP ENTEREXIT PLAY MODE REPEAT PLAY PLAY SETUP OFF ON RESUME PLAY LOCK MENUSETUP ENTEREXIT PLAY MODE REPEAT PLAY PLAY SETUP OFF ON RESUME PLAY LOCK VQT0X39ENG.book 62 ページ ２００６年６月１４日 水曜日 午前１０時５１分
63VQT0X39 1 Rotate the mode dial to select . The lens cover closes automatically. The still pictures (up to 12 scenes) recorded on the SD card are displayed as thumbnails. 2 Press the cursor button up, down, left or right to select the scene to be played back. 1Scene number 2Bar graph The selected scene will be encircled by a red frame. ≥When 13 or more scenes have been recorded, the next (or previous) page is displayed by pressing the cursor button. ≥If you press and hold the cursor button up or down, you can advance 12 scenes at a time. The screen will not change at this time, but the scene numbers and bar graph display will change so release the button when you have arrived at the page with the scene you want to display. 3 Press the button in the center of the cursor button. The selected scene is played back on the full screen. The operation icon is automatically displayed on the LCD monitor. 4 Press the cursor button up, down, left or right to operate. : Slide show (playback of the still pictures on the SD card in numerical order) start/ pause. ¢ : Plays back the previous picture. : Plays back the next picture. ∫: Stops the playback, and shows the thumbnails. ¢Only when [SLIDE SHOW] has been selected. (P64) Still picture playback (JPEG still pictures) SETUP PLAY 3/243/243/24 1 2 VQT0X39ENG.book 63 ページ ２００６年６月１４日 水曜日 午前１０時５１分
64VQT0X39 Playing back still pictures as a slide show Press the menu button, then use the cursor button to select [PLAYSETUP]#[PLAYMODE]# [SLIDE SHOW]. (P27) ≥Still pictures will not be played as a slide show when [PICTURE] is selected. ∫About still picture compatibility ≥This unit is compliant with the unified standard DCF (Design rule for Camera File system) established by JEITA (Japan Electronics and Information Technology Industries Association). ≥The file format supported by this unit is JPEG. (Not all JPEG formatted files will be played back.) ≥If an out-of-specs still picture is played back, the folder/file name may not be displayed. ≥This unit may degrade or not play back still picture recorded or created on another product and another product may degrade or not play back data recorded on this unit. Still picture playback (JPEG still pictures) (continued) MENUSETUP ENTEREXIT PLAY MODE LOCK PLAY SETUP PICTURE SLIDE SHOW DPOF SET ≥Do not operate the mode dial during the slide show. ≥When the access lamp is lit, do not insert or remove an SD card. ≥It takes time to display the still picture depending on the number of pixels of the still picture. ≥If you attempt to play back still pictures recorded in a different format or still picture data is defective, the whole display becomes grayish and the “UNPLAYABLE CARD.’’ indication may appear as warning.≥When playing back a still picture recorded on other equipment, the date and time display is different from when it was recorded. ≥When playing back a still picture recorded on other equipment, its size and that of this unit may appear differently. (P97) ≥Even if the LCD Monitor is closed, the power does not turn off. VQT0X39ENG.book 64 ページ ２００６年６月１４日 水曜日 午前１０時５１分
65VQT0X39 The deleted scenes cannot be restored. ∫Deleting multiple files from the thumbnail display. ¬Rotate the mode dial to select or . 1Press the menu button, then use the cursor button to select [ DELETE]#[ SELECT] or [ ALL]. (P27) When [SELECT] is selected, the motion picture or still picture scenes will be displayed as thumbnails. ≥When [ALL] is selected, proceed to step 4. 2 (Only when [SELECT] is selected in step 1) Use the cursor button to select the scene to be deleted, then press the button in the center. The selected scene will be encircled by a yellow frame. ≥When the button in the center is pressed again, the selected scene will be canceled. ≥Up to 12 scenes displayed on a page can be set in succession. 3(Only when [SELECT] is selected in step 1) Press the [ ] button. ≥If no file is selected in step 2 and the [ ] button is pressed, the scene encircled by a red frame is deleted. 4When the confirmation message appears, use the cursor button to select [YES], then press the button in the center. ≥To stop deleting, select [NO]. Deleting scenes This is for deleting scenes recorded on SD cards. MENUSETUP ENTEREXIT SELECT ALL DELETE MENUEXIT SETUP ENTER DELETE SCENES 1/241/241/24 SETUP ENTER DELETE SCENES DELETE SCENE? YES NO MENUEXIT SETUP ENTER DELETE SCENES DELETE SCENE? YES NO MENUEXIT VQT0X39ENG.book 65 ページ ２００６年６月１４日 水曜日 午前１０時５１分
66VQT0X39 ∫Deleting scenes one at a time ¬Rotate the mode dial to select or . 1Press the [ ] button during playback. 2When the confirmation message appears, use the cursor button to select [YES], then press the button in the center. ≥To stop deleting, select [NO]. ∫Deleting still picture files recorded on an SD card by other equipment A still picture file (other than JPEG) that cannot be played back on this unit may be erased. Deleting scenes (continued) DELETE SCENE? SETUP ENTER YES NO DELETE SCENE? SETUP ENTER YES NO ≥Do not open the card slot cover while deleting. The deletion will stop. ≥Scenes displayed as thumbnails in shades of blue and white cannot be deleted. (P105) ≥Scenes that are locked cannot be deleted. ≥If the write protection switch on an SD card is set to [LOCK], the scenes on the card cannot be deleted. (P16) ≥When “CARD FULL.” is shown during recording, delete unnecessary scenes. If there are no scenes to be deleted, it means that the memory is full so inser t a new SD card.≥In case of [ALL], the deletion may take time if there are many scenes on the SD card. ≥When [ALL] is selected in the motion picture playback mode, the following scenes will be deleted. – When [PLAY MODE] is set to [VIEW ALL]: All the scenes on the SD card – When [PLAY MODE] is set to [BY DATE]: All the scenes selected by date ≥Do not turn off this unit while deleting. ≥When you delete scenes, use a battery with sufficient battery power or use the AC adaptor. ≥If scenes conforming to DCF standard are deleted, all the data related to the scenes will be deleted. VQT0X39ENG.book 66 ページ ２００６年６月１４日 水曜日 午前１０時５１分
67VQT0X39 Scenes recorded on an SD card can be locked so that they may not be deleted by mistake. (However even if you lock some scenes on an SD card, formatting the card will delete all the scenes.) ¬Rotate the mode dial to select or . 1Press the menu button, then use the cursor button to select [ PLAY SETUP]#[ LOCK]# [YES]. (P27) 2Press the cursor button up, down, left or right to select the scene to be protected, then press the button in the center. [ ] indication appears and the selected scene is locked. ≥Press the button in the center again to release the lock setting. ≥2 or more scenes can be set in succession. To complete the settings Press the [MENU] button. Locking scenes This is for preventing scenes from being deleted by mistake. MENUSETUP ENTEREXIT PLAY MODE LOCK PLAY SETUP YES NO DPOF SET MENUSETUP ENTEREXIT LOCK 1/241/241/24 ≥Scenes displayed as thumbnails in shades of blue and white cannot be locked. (P105) ≥If the write protection switch on an SD card is set to [LOCK], the scenes on the card cannot be locked. (P16) VQT0X39ENG.book 67 ページ ２００６年６月１４日 水曜日 午前１０時５１分
68VQT0X39 Please be aware that if an SD card is formatted, then all the data recorded on the card will be erased. Store important data on a PC, etc. We recommend using MotionSD STUDIO etc. to acquire data recorded on this unit. (P76) ¬Rotate the mode dial to select , , or . 1Press the menu button, then use the cursor button to select [ SETUP]# [ FORMAT CARD]#[YES]. (P27) 2When the confirmation message appears, use the cursor button to select [YES], then press the button in the center. ≥To cancel formatting, select [NO]. Formatting an SD card This is for initializing (formatting) cards. MENUSETUP ENTEREXIT DISPLAY FORMAT CARD DATE/TIME POWER SAVESETUP YES NO1/2 DATE FORMAT SETUP ENTER FORMAT CARDALL DATA WILL BE DELETED. FORMAT THE CARD NOW? YES NO MENUEXIT ≥Use this unit to format SD cards. If an SD card is formatted on other equipment (such as a PC), the time spent for recording may become longer and you may not be able to use the SD card. ≥During formatting, do not turn this unit off. ≥When you format the SD card, use a battery with sufficient battery power or the AC adaptor. ≥Depending on the type of SD card being used, it may take time to format. ≥Do not remove the SD card while formatting. ≥If the write protection switch on an SD card is set to [LOCK], it cannot be formatted. (P16) VQT0X39ENG.book 68 ページ ２００６年６月１４日 水曜日 午前１０時５１分
69VQT0X39 You can write the data of pictures to be printed, number of copies, and other information (DPOF data) onto the SD card. ¬Rotate the mode dial to select . 1Press the menu button, then use the cursor button to select [ PLAY SETUP]#[ DPOF SET]# [SET]. (P27) 2Press the cursor button up, down, left or right to select a scene to be set, then press the button in the center. The number of prints set to be in DPOF is displayed. 3Press the cursor button up or down to select the number of prints, then press the button in the center. ≥You can select from 0 to 999. (Selected number of pictures can be printed as you set the number of prints with the printer supporting DPOF.) ≥The function can be canceled by setting the number of pictures to [0]. ≥2 or more scenes can be set in succession. To complete the settings Press the [MENU] button. To return the total number of pictures to [0] Press the menu button, then use the cursor button to select [PLAYSETUP]#[ DPOF SET]# [CANCEL ALL]. (P27) ≥When the confirmation message appears, use the cursor button to select [YES], then press the button in the center. DPOF setting This is for writing the printing data on an SD card. MENUSETUP ENTEREXIT PLAY MODE LOCK PLAY SETUP NO SET CANCEL ALL DPOF SET SETUP ENTER DPOF SET÷ SETUP ENTER DPOF SETù MENUSETUP ENTEREXIT PLAY MODE LOCK PLAY SETUP NO SET CANCEL ALL DPOF SET VQT0X39ENG.book 69 ページ ２００６年６月１４日 水曜日 午前１０時５１分
70VQT0X39 ∫What is DPOF? DPOF stands for Digital Print Order Format. This enables picture printing information to be written onto an SD card so that it can be used on a system supporting DPOF. To print pictures by directly connecting this unit to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.) ¬Connect this unit to the AC adaptor. ¬Rotate the mode dial to select . 1Open the terminal cover, then firmly plug one end of the USB cable 1 (supplied) into the unit’s USB terminal and the other end into the terminal on the printer. Insert the plugs as far as they will go. The images recorded on the SD card are displayed as thumbnails. ≥When no SD card is inserted in this unit, the [ ] indication does not appear. (You cannot print any pictures.) ≥When this unit and the printer are not connected properly, the [ ] indication keeps blinking. (It will blink for over approx. 1 minute.) Connect the cable or check the printer. ≥Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.) DPOF setting (continued) ≥The DPOF setting can be established for up to 999 scenes. ≥DPOF setting made on another camera may not be recognized by this unit. Please perform the DPOF settings on this unit. ≥You cannot add the recording date to pictures to be printed with the DPOF settings. ≥If the write protection switch on an SD card is set to [LOCK], the DPOF setting cannot be set. (P16) PictBridge This is for printing pictures by directly connecting to the printer. 1 SETUP ENTER 1/241/241/24PictBridgePictBridge PictBridge VQT0X39ENG.book 70 ページ ２００６年６月１４日 水曜日 午前１０時５１分