Panasonic Sdr S100 Operating Instructions Manual

61VQT0T50
Playing back still pictures as a slide show
Press the menu button, then use the 
cursor button to select 
[PLAYSETUP]#[PLAYMODE]#
[SLIDE SHOW]. (P26)
≥Still pictures will not be played as a slide show 
when [PICTURE] is selected.
∫About still picture compatibility
≥This unit is compliant with the unified standard DCF (Design rule for Camera File 
system) established by JEITA (Japan Electronics and Information Technology 
Industries Association).
≥The file format supported by this unit is JPEG....

62VQT0T50
The deleted scenes cannot be restored.
∫Deleting multiple files from the thumbnail display.
¬Rotate the mode dial to select   or  .
1Press the menu button, then use the 
cursor button to select 
[DELETE]#[ SELECT] or 
[ ALL]. (P26)
When [SELECT] is selected, the motion picture 
or still picture scenes will be displayed as 
thumbnails.
≥When [ALL] is selected, proceed to step 4.
2 (Only when [SELECT] is selected in step 1)
Use the cursor button to select the 
scene to be deleted, then press the...

63VQT0T50
∫Deleting scenes one at a time
¬Rotate the mode dial to select   or  .
1Press the [ ] button during 
playback.
2When the confirmation message 
appears, use the cursor button to 
select [YES], then press the button in 
the center.
≥To stop deleting, select [NO].
∫Deleting still picture files recorded on an SD card by other equipment
A still picture file (other than JPEG) that cannot be played back on this unit may be 
erased.
DELETE SCENE?
SETUP ENTER
YES
NO
DELETE SCENE?
SETUP ENTER
YES
NO
≥Do...

64VQT0T50
Scenes recorded on an SD card can be locked so that they may not be deleted by 
mistake. (However even if you lock some scenes on an SD card, formatting the card will 
delete all the scenes.) 
¬Rotate the mode dial to select   or  .
1Press the menu button, then use the 
cursor button to select 
[ PLAY SETUP]
# 
[ LOCK]#[YES]. (P26)
2Press the cursor button up, down, left 
or right to select the scene to be 
protected, then press the button in 
the center.
[ ] indication appears and the selected...

65VQT0T50
Please be aware that if an SD card is formatted, then all the data recorded on the 
card will be erased. Store important data on a PC, etc. When saving 
scenes 
recorded using this unit to a PC, you must use MotionSD STUDIO. (P73)
¬Rotate the mode dial to select  ,  ,   or  .
1Press the menu button, then use the 
cursor button to select 
[SETUP]
#[ FORMAT CARD]#
[YES]. (P26)
2When the confirmation message 
appears, use the cursor button to 
select [YES], then press the button in 
the center....

66VQT0T50
You can write the data of pictures to be printed, number of copies, and other 
information (DPOF data) onto the SD card.
¬Rotate the mode dial to select  .
1Press the menu button, then use the 
cursor button to select 
[ PLAY SETUP]
#[ DPOF SET]#
[SET]. (P26)
2Press the cursor button up, down, left 
or right to select a scene to be set, 
then press the button in the center.
The number of prints set to be in DPOF is 
displayed.
3Press the cursor button up or down to 
select the number of prints,...

67VQT0T50
∫What is DPOF?
DPOF stands for Digital Print Order Format. This enables picture printing information to 
be written onto an SD card so that it can be used on a system supporting DPOF.
To print pictures by directly connecting this unit to the printer, use a printer compatible 
with PictBridge. (Read the operating instructions for the printer.) 
¬Connect this unit to the AC adaptor.
¬Rotate the mode dial to select  .
1Open the terminal cover, then firmly 
plug one end of the USB cable 1...

68VQT0T50
2Press the cursor button up, down, left 
or right to select a scene to be 
printed, then press the button in the 
center.
The number of pictures set is displayed.
3Press the cursor button up or down to 
select the desired number of prints, 
then press the button in the center.
≥You can set up to 9 prints.
≥The function can be canceled by setting the 
number of pictures to [0].
≥Up to 12 scenes displayed on a page can be 
set in succession by repeating steps 2 and 3.
4Press the menu button to...

69VQT0T50
7Use the cursor button to select 
[ PAGE LAYOUT], then press the 
cursor button right to enter the layout 
setting.
–STANDARD:Layout specific to the printer
–:No frame print
–:Frame print
≥You cannot set page layouts not supported on 
the printer.
8Use the cursor button to select 
[ PRINT], then press the cursor 
button right to select [YES]. The 
pictures are printed.
≥Exit PictBridge by disconnecting the USB 
cable (supplied) after the pictures have been 
printed.
When you stop printing...

70VQT0T50
Images recorded by this unit can be played back on a TV.
¬Insert an SD card with recordings into the unit.
1Open the terminal cover and then 
connect the multi cable (supplied)  to 
the multi-connector terminal [MULTI] 
and the TV. 
1Multi cable (supplied)
Insert the plugs as far as they will go.
≥If the TV has an S-Video terminal, then also 
connect an S-Video plug. It allows you to 
enjoy more beautiful images. 
(You must also connect the Video/Audio input 
terminals.)
≥Use the AC adaptor to...