Panasonic Sdr S100 Operating Instructions Manual

91VQT0T50
∫[ DISPLAY]≥OFF≥ON
The screen indications are selected as 
shown in the illustration below.
∫[ BEEP SOUND]
≥OFF≥ON
This allows operations such as starting 
and ending recording to be signalled by a 
beep.
When [OFF] is set, no beep is heard 
when an operation such as recording is 
started or ended.
1 Beep
When you start recording or turn on the 
power. Also when deleting files, when the 
confirmation message appears while 
formatting and when this unit is 
recognized by the PC or the printer....

92VQT0T50
Recording indications
1 Motion picture recording2 Still picture recording
Indications
R 0h00m12R1700

  3:42 PM
DEC 15 2005
;0h00m00s;
  3:42 PM
DEC 15 2005
SPO.I.S.AUTOO.I.S.AUTO
Remaining battery power
R 0h00mRemaining time left for 
recording
0h00m00sTime code
12:30 PM
DEC 15 2005Date/Time indication
Ô/; (Red)Recording
; (Green) Recording pause
Digital zoom
Aut o mode
Manual mode
MFManual focus
2t
Zoom magnification 
indication
Back light mode
Image stabilizer
Powe r  L C D
1/60Shutter...

93VQT0T50
Playback indications
1 Motion picture playback2 Still picture playback
Confirmatory indications
12
R22
SETUP PLAY
1/241/24
SETUP
PLAY
1/241/24
1Playback
;Pause
56Cue/Review playback
78Last/first file paused
9:Skip playback
D/ESlow motion playback
/Frame-by-frame playback
0h00m00sMotion picture playback time
Select playback
Volume adjustment
Slide show playback
100-0001Still picture folder/Scene 
number display
No. 10File number
When a printer compatible with 
PictBridge is connected...

94VQT0T50
Confirmatory indications
Indications (continued)
CANNOT RECORD.Data writing to the SD card has failed.
CHECK CARD.This card is not compatible or it cannot be recognized by 
the unit.
THIS CARD CANNOT 
RECORD IN VIDEO MODE.An 8 MB or 16 MB SD card has been inserted in motion 
picture recording mode.
CARD LOCKED.The write protection switch on the SD Memory Card is set 
to [LOCK]. (P15)
SCENE NUMBER IS FULL.The number of still pictures or motion picture scenes 
(program) that can be recorded on 1...

95VQT0T50
CHANGE TO MANUAL 
MODE.You have set the [AUTO/MANUAL/FOCUS] switch to 
[AUTO] and are attempting to set [SCENE MODE] from 
the menu screen.
CANCEL MAGICPIX MODE.You are attempting to set [SCENE MODE] from the menu 
screen while MAGICPIX is set. (P42)
TURN OFF POWER LCD.You are attempting to set [LCD AI] from the menu screen 
when the [POWER LCD] button has been pressed to 
brighten the LCD monitor.
NO INK IN PRINTER.
Check the connected printer.
NO PAPER IN PRINTER.
PRINTER ERROR.
PLEASE...

96VQT0T50
∫About recoveryWhen the SD card was accessed, you tried to playback a file displayed as a thumbnail in 
shades of blue and white (P101) or faulty control information or a play list created on another 
device was read, a control information recovery message or play list delete message such as 
those shown below may be displayed. (After recovery starts, it may take time depending on 
the error.)
;
;
YES
When connecting to AC adaptor or the 
remaining capacity of the battery is 
enough:...

97VQT0T50
Some functions in this unit are disabled or cannot be selected due to the unit’s 
specifications. The table below shows examples of functions restricted by 
various conditions.
Functions that cannot be used simultaneously
FunctionsConditions which
disable the 
functions
Digital zoom
MagicPix≥In still picture 
recording mode
Backlight 
compensation≥When the MagicPix 
function is used
≥When the iris/gain is 
set
Flash≥In motion picture 
recording mode
≥During demo mode
Scene mode≥When setting the...

98VQT0T50
Troubleshooting
ProblemCheck points
This unit cannot be 
turned on.≥Is the battery fully charged?
>Charge the battery using the AC adaptor. (P17)
This unit is turned off 
automatically.≥If you do not use the unit for approximately 5 minutes, 
the power is automatically turned off to conserve the 
battery charge. (P91) To resume recording, turn the 
power back on.
The power will not turn off automatically when the 
power save function (P91) is set to [OFF].
This unit does not stay 
on long...

99VQT0T50
ProblemCheck points
Recording does not 
start although power is 
supplied to this unit and 
the SD card is correctly 
inserted.≥Has the SD card’s write protect switch been set to 
[LOCK]?
>No recording is possible while the write protect switch is 
set to [LOCK]. (P15)
≥Is the SD card’s memory full?
>If the card has no more available memory, free up some 
memory by copying some scenes to a PC (P80) and then 
deleting unnecessary scenes. (P62)
≥Is the unit set to the motion picture recording...

100VQT0T50
Troubleshooting (continued)
ProblemCheck points
Although this unit is 
correctly connected to a 
TV, playback images 
cannot be seen.≥Have you selected video input on the TV? 
>Please read the operating instructions of your TV and 
select the channel that matches the input used for the 
connection.
Playback image is not 
clear.
Sound breaks up or 
noise affects the picture 
and/or sound.≥Noise may interfere with the picture and/or sound when 
the multi cable terminal becomes dirty. Wipe off...