Panasonic Sdr S100 Operating Instructions Manual

81VQT0T50
When this unit is in motion picture recording mode or still 
picture recording mode, verify the driver. (P86)
≥If you are running Windows 2000, the message 
shown on the right may appear the first time you 
connect this unit to the PC (the first time you use 
motion picture recording mode or motion picture 
playback mode). This has no affect on operation 
so click [Yes].
– [Panasonic SD Video Camera Web Camera Device] 
is displayed.
– The recognition procedure is completed 
automatically, and...

82VQT0T50
≥Before initial use, select the software’s [Read this first] from the start menu, then 
read through the additional instructions or updated information.
≥The End User Licence Agreement is displayed when the software is first started so 
read carefully through its terms and conditions, then click [I agree].
∫Starting MotionSD STUDIO
1 Select [start]>
[All Programs (Programs)]>
[Panasonic]>
[MotionSD STUDIO 1.0E]>
[MotionSD STUDIO].
[Let’s Try MotionSD STUDIO] is displayed on the 
screen....

83VQT0T50
For details on how to use MotionSD STUDIO, read the PDF instructions or the help 
files.
1 Select [start]>
[All Programs (Programs)]>
[Panasonic]>
[MotionSD STUDIO 1.0E]>
[Manual (PDF format)].
≥After starting the software, on the menu select 
[Help]>[Help] to display the help files.
≥You will need Adobe Acrobat Reader 5.0 or 
later to read the PDF operating instructions. 
(P73)
When the unit is connected to a PC, you can send pictures and audio from the unit over 
the Internet to the person...

84VQT0T50
∫Software that can be used when using the unit as a Web Camera
(±: Available, —: Not available)
Refer to page 76 for information about the operating environment.
1 Yo u r  o w n  P C
2 Other person’s PC
∫Connections
Before connecting the unit to the PC, you must install [Web Camera Driver]. (P78)
1) Turn on the unit’s power, then set it to motion picture recording mode 
or still picture recording mode.
2) Connect the unit to the PC via the USB cable. (P80)
≥Do not use any other USB cables...

85VQT0T50
Follow the steps below to uninstall any software applications that you no longer require.
1 Click [start]>([Settings]>) [Add or 
Remove Programs (Applications)] in 
[Control Panel].
2 Click here. Select the software 
application to be deleted, then click 
[Change/Remove] ([Change or 
Remove] or [Add/Remove]).
≥Proceed with the uninstallation by following 
the on-screen instructions.
≥Select [Panasonic SD Video Camera Web 
Driver] to uninstall the Web camera driver.
≥To remove the Web camera...

86VQT0T50
If the driver does not work properly, follow the steps below to verify if it has been 
recognized properly. Select the unit’s mode, connect the unit to the PC via the USB 
cable, then verify the driver. (P80)
≥With some PCs including those made by NEC, the Device Manager may not be 
displayed if a mode that places restrictions on the functions has been established. 
Consult the manufacturer or follow the steps in your PC’s operating instructions to 
establish a mode in which all the functions...

87VQT0T50
]∫If the driver has not been recognized properly
[!] or [Unknown device] appears at [USB (Universal Serial Bus) controller] or [Other 
devices], etc.
(Where the display will appear depends on the type of PC you are using.)
Disconnect the USB cable, uninstall then re-install the [Web Camera Driver] (P78) and 
connect the USB cable again.
In the following cases, the Web camera driver has not been installed properly.
≥When an exclamation [!] mark appears at [USB compound device] under [USB...

88VQT0T50
Details
Number of recordable pictures
∫Picture quality and number of recordable pictures 
(using SD Memory Cards)
≥The number of recordable pictures depends on whether [ ] and [ ] are used 
together and on the subject being recorded.
≥The numbers shown in the table are approximations.
Approximate Number of Recordable Pictures on 
an SD Card
Picture size (2048t1512) (1280t960)
Picture quality
8MB24 712
16 MB712 2032
32 MB18 28 45 73
64 MB38 61 96 155
128 MB75 120 185 300
256 MB155 250 390 620...

89VQT0T50
Motion picture recording 
menus
∫[ BASIC] 
[ SCENE MODE] (P43)
[ WIND CUT] (P40)
[ REC MODE] (P34)
[ WIDE] (P40)
[CLOCKSET
] (P28)
∫[ ADVANCE] 
[ D.ZOOM] (P36)
[ O.I.S.] (P41)
[MAGICPIX] (P42)
[ REC LAMP] (P32)
[ ZOOM MIC] (P37)
∫[ SETUP]
[ DISPLAY] (P91)
[ DATE/TIME] (P29)
[DATEFORMAT] (P28)
[ FORMAT CARD] (P65)[ QUICK START] (P18)
[ POWER SAVE] (P91)
[ BEEP SOUND] (P91)
[ LCD AI] (P30)
[ LCD SET] (P29)
[ INITIAL SET] (P91)
[DEMOMODE
] (P91)
Still picture recording 
menu
≥For [ SETUP] items,...

90VQT0T50
Motion picture playback 
menus
∫[ DELETE] 
[ SELECT] (P62)
[ALL] (P62)
∫[PLAY SETUP] 
[ PLAY MODE] (P59)
[ REPEAT PLAY] (P59)
[ RESUME PLAY] (P59)
[ LOCK] (P64)
∫[ SETUP]
[ DISPLAY] (P91)
[ DATE/TIME] (P29)
[ DATE FORMAT] (P28)
[ FORMAT CARD] (P65)
[ POWER SAVE] (P91)
[ BEEP SOUND] (P91)
[ LCD AI] (P30)
[ LCD SET] (P29)
[ TV ASPECT] (P71)
Still picture playback 
menus
≥For [DELETE] and [ SETUP] 
items, refer to the motion picture 
playback menus.
∫[PLAY SETUP] 
[PLAY MODE] (P59)
[LOCK] (P64)...