Panasonic Sdr S100 Operating Instructions Manual

							61VQT0T50
Playing back still pictures as a slide show
Press the menu button, then use the 
cursor button to select 
[PLAYSETUP]#[PLAYMODE]#
[SLIDE SHOW]. (P26)
≥Still pictures will not be played as a slide show 
when [PICTURE] is selected.
∫About still picture compatibility
≥This unit is compliant with the unified standard DCF (Design rule for Camera File 
system) established by JEITA (Japan Electronics and Information Technology 
Industries Association).
≥The file format supported by this unit is JPEG. (Not all JPEG formatted files will be 
played back.) 
≥If an out-of-specs 
still picture is played back, the folder/file name may not be 
displayed.
≥This unit may degrade or not play back 
still picture recorded or created on another 
product and another product may degrade or not play back data recorded on this 
unit.
MENUSETUP ENTEREXIT
PLAY MODE
LOCK PLAY SETUP
PICTURE
SLIDE SHOW
DPOF SET
≥Do not operate the mode dial during the 
slide show.
≥When the access lamp is lit, do not insert 
or remove an SD card.
≥It takes time to display the still picture 
depending on the number of pixels of the 
still picture.
≥If you attempt to play back still pictures 
recorded in a different format or still 
picture data is defective, the whole 
display becomes grayish and the 
“UNPLAYABLE CARD.’’ indication may 
appear as warning.≥When playing back a still picture 
recorded on other equipment, the date 
and time display is different from when it 
was recorded.
≥When playing back a still picture 
recorded on other equipment, its size and 
that of this unit may appear differently. 
(P93)
VQT0T50_PP_ENG.book  61 ページ  ２００５年８月３１日　水曜日　午後２時２５分 
						

							62VQT0T50
The deleted scenes cannot be restored.
∫Deleting multiple files from the thumbnail display.
¬Rotate the mode dial to select   or  .
1Press the menu button, then use the 
cursor button to select 
[DELETE]#[ SELECT] or 
[ ALL]. (P26)
When [SELECT] is selected, the motion picture 
or still picture scenes will be displayed as 
thumbnails.
≥When [ALL] is selected, proceed to step 4.
2 (Only when [SELECT] is selected in step 1)
Use the cursor button to select the 
scene to be deleted, then press the 
button in the center.
The selected scene will be encircled by a yellow 
frame.
≥When the button in the center is pressed 
again, the selected scene will be canceled.
≥Up to 12 scenes displayed on a page can be 
set in succession.
3(Only when [SELECT] is selected in step 1)
Press the [ ] button.≥If no file is selected in step 2 and the [] button is pressed, the scene encircled by a red 
frame is deleted. 
4When the confirmation message 
appears, use the cursor button to 
select [YES], then press the button in 
the center.
≥To stop deleting, select [NO].
Deleting scenes
This is for deleting scenes recorded on SD cards.
MENUSETUP ENTEREXIT
SELECT
ALL DELETE
MENUEXIT
SETUP ENTER
DELETE SCENES
1/24
SETUP ENTER
DELETE SCENES
DELETE SCENE?
YES
NO
MENUEXIT
SETUP ENTER
DELETE SCENES
DELETE SCENE?
YES
NO
MENUEXIT
VQT0T50_PP_ENG.book  62 ページ  ２００５年８月３１日　水曜日　午後２時２５分 
						

							63VQT0T50
∫Deleting scenes one at a time
¬Rotate the mode dial to select   or  .
1Press the [ ] button during 
playback.
2When the confirmation message 
appears, use the cursor button to 
select [YES], then press the button in 
the center.
≥To stop deleting, select [NO].
∫Deleting still picture files recorded on an SD card by other equipment
A still picture file (other than JPEG) that cannot be played back on this unit may be 
erased.
DELETE SCENE?
SETUP ENTER
YES
NO
DELETE SCENE?
SETUP ENTER
YES
NO
≥Do not open the card slot cover while 
deleting. The deletion will stop.
≥Scenes displayed as thumbnails in 
shades of blue and white cannot be 
deleted. (P101)
≥Scenes that are locked cannot be 
deleted.
≥If the write protection switch on an SD 
card is set to [LOCK], the scenes on the 
card cannot be deleted. (P15)
≥When “CARD FULL.” is shown during 
recording, delete unnecessary scenes. If 
there are no scenes to be deleted, it 
means that the memory is full so insert a 
new SD card.≥In case of [ALL], the deletion may take 
time if there are many scenes on the SD 
card. 
≥Do not turn off this unit while deleting.
≥When you delete scenes, use a battery 
with sufficient battery power or use the 
AC adaptor.
≥If scenes conforming to DCF standard 
are deleted, all the data related to the 
scenes will be deleted.
VQT0T50_PP_ENG.book  63 ページ  ２００５年８月３１日　水曜日　午後２時２５分 
						

							64VQT0T50
Scenes recorded on an SD card can be locked so that they may not be deleted by 
mistake. (However even if you lock some scenes on an SD card, formatting the card will 
delete all the scenes.) 
¬Rotate the mode dial to select   or  .
1Press the menu button, then use the 
cursor button to select 
[ PLAY SETUP]
# 
[ LOCK]#[YES]. (P26)
2Press the cursor button up, down, left 
or right to select the scene to be 
protected, then press the button in 
the center.
[ ] indication appears and the selected scene 
is locked.
≥Press the button in the center again to release 
the lock setting.
To complete the settings
Press the [MENU] button.
≥Scenes displayed as thumbnails in shades of blue and white cannot be locked. (P101)
≥If the write protection switch on an SD card is set to [LOCK], the scenes on the card cannot 
be locked. (P15)
Locking scenes
This is for preventing scenes from being deleted by mistake.
MENUSETUP ENTEREXIT
PLAY MODE
LOCK PLAY SETUP
YES
NO DPOF SET
MENUSETUP ENTEREXIT
LOCK
1/24
VQT0T50_PP_ENG.book  64 ページ  ２００５年８月３１日　水曜日　午後２時２５分 
						

							65VQT0T50
Please be aware that if an SD card is formatted, then all the data recorded on the 
card will be erased. Store important data on a PC, etc. When saving 
scenes 
recorded using this unit to a PC, you must use MotionSD STUDIO. (P73)
¬Rotate the mode dial to select  ,  ,   or  .
1Press the menu button, then use the 
cursor button to select 
[SETUP]
#[ FORMAT CARD]#
[YES]. (P26)
2When the confirmation message 
appears, use the cursor button to 
select [YES], then press the button in 
the center.
≥To cancel formatting, select [NO].
Formatting an SD card 
This is for initializing (formatting) cards.
MENUSETUP ENTEREXIT
DISPLAY
FORMAT CARD DATE/TIME
POWER SAVESETUP
YES
NO1/2
DATE FORMAT
SETUP ENTER
FORMAT CARDALL DATA WILL BE
DELETED.
FORMAT THE CARD NOW?
YES
NO
MENUEXIT
≥Use this unit to format SD cards. If an SD card is formatted on other equipment (such as 
a PC), the time spent for recording may become longer and you may not be able to use 
the SD card.
≥During formatting, do not turn this unit off.
≥When you format the SD card, use a battery with sufficient battery power or the AC 
adaptor.
≥Depending on the type of SD card being used, it may take time to format.
≥Do not remove the SD card while formatting.
≥If the write protection switch on an SD card is set to [LOCK], it cannot be formatted. 
(P15)
VQT0T50_PP_ENG.book  65 ページ  ２００５年８月３１日　水曜日　午後２時２５分 
						

							66VQT0T50
You can write the data of pictures to be printed, number of copies, and other 
information (DPOF data) onto the SD card.
¬Rotate the mode dial to select  .
1Press the menu button, then use the 
cursor button to select 
[ PLAY SETUP]
#[ DPOF SET]#
[SET]. (P26)
2Press the cursor button up, down, left 
or right to select a scene to be set, 
then press the button in the center.
The number of prints set to be in DPOF is 
displayed.
3Press the cursor button up or down to 
select the number of prints, then 
press the button in the center.
≥You can select from 0 to 999. (Selected 
number of pictures can be printed as you set 
the number of prints with the printer 
supporting DPOF.)
≥The function can be cancelled by setting the 
number of pictures to [0].
To complete the settings
Press the [MENU] button.
To return the total number of pictures to [0]
Press the menu button, then use the 
cursor button to select 
[PLAYSETUP]#[DPOFSET]#
[CANCEL ALL]. (P26)
≥When the confirmation message appears, use 
the cursor button to select [YES], then press 
the button in the center.
DPOF setting
This is for writing the printing data on an SD card.
MENUSETUP ENTEREXIT
PLAY MODE
LOCK PLAY SETUP
NO
SET
CANCEL ALL DPOF SET
SETUP ENTER
DPOF SET÷
SETUP ENTER
DPOF SETù
MENUSETUP ENTEREXIT
PLAY MODE
LOCK PLAY SETUP
NO
SET
CANCEL ALL DPOF SET
VQT0T50_PP_ENG.book  66 ページ  ２００５年８月３１日　水曜日　午後２時２５分 
						

							67VQT0T50
∫What is DPOF?
DPOF stands for Digital Print Order Format. This enables picture printing information to 
be written onto an SD card so that it can be used on a system supporting DPOF.
To print pictures by directly connecting this unit to the printer, use a printer compatible 
with PictBridge. (Read the operating instructions for the printer.) 
¬Connect this unit to the AC adaptor.
¬Rotate the mode dial to select  .
1Open the terminal cover, then firmly 
plug one end of the USB cable 1 
(supplied) into the unit’s USB terminal 
and the other end into the terminal on 
the printer.
Insert the plugs as far as they will go.
The images recorded on the SD card are 
displayed as thumbnails.
≥When no SD card is inserted in this unit, the 
[ ] indication does not appear. (You 
cannot print any pictures.) 
≥When this unit and the printer are not 
connected properly, the [ ] indication 
keeps blinking. (It will blink for over 
approx. 1 minute.) Connect the cable or check 
the printer.
≥Do not use any other USB cables except the 
supplied one. (Operation is not guaranteed 
with any other USB cables.)
≥The DPOF setting can be established for up to 999 scenes.
≥DPOF setting made on another camera may not be recognized by this unit. Please 
perform the DPOF settings on this unit.
≥You cannot add the recording date to pictures to be printed with the DPOF settings.
≥If the write protection switch on an SD card is set to [LOCK], the DPOF setting cannot 
be set. (P15)
PictBridge
This is for printing pictures by directly connecting to the printer.
1
SETUP ENTER
1/241/24PictBridgePictBridge
PictBridge
VQT0T50_PP_ENG.book  67 ページ  ２００５年８月３１日　水曜日　午後２時２５分 
						

							68VQT0T50
2Press the cursor button up, down, left 
or right to select a scene to be 
printed, then press the button in the 
center.
The number of pictures set is displayed.
3Press the cursor button up or down to 
select the desired number of prints, 
then press the button in the center.
≥You can set up to 9 prints.
≥The function can be canceled by setting the 
number of pictures to [0].
≥Up to 12 scenes displayed on a page can be 
set in succession by repeating steps 2 and 3.
4Press the menu button to display the 
menus screen.
5Use the cursor button to select 
[ DATE PRINT], then press the 
cursor button right to enter the date 
print setting.
≥If the printer is not capable of date printing, 
this setting is unavailable.
6Use the cursor button to select 
[ PAPER SIZE], then press the 
cursor button right to enter the paper 
size setting.
–STANDARD:Size specific to the printer
–4k5 INCH:L size
–5k7 INCH:2L size
–4k6 INCH:Postcard size
–A4:A4 size
≥You cannot set paper sizes not supported on 
the printer.
PictBridge (continued)
SETUP ENTER
3/243/240PictBridge
SETUP ENTER
3/243/242 2PictBridge
MENUPRINT
SETUP ENTER
DATE PRINT 
PAPER SIZE
PAGE LAYOUT
PRINTNO
NOPictBridge
MENURETURNSTANDARD
STANDARD
OFF
ON
SETUP ENTERDATE PRINT
PAPER SIZE
PAGE LAYOUT
PRINTPictBridge
4k5 INCH
5k7 INCH
A4 4k6 INCH STANDARD
SETUP ENTERDATE PRINT
PAPER SIZE
PAGE LAYOUT
PRINT
PictBridge
VQT0T50_PP_ENG.book  68 ページ  ２００５年８月３１日　水曜日　午後２時２５分 
						

							69VQT0T50
7Use the cursor button to select 
[ PAGE LAYOUT], then press the 
cursor button right to enter the layout 
setting.
–STANDARD:Layout specific to the printer
–:No frame print
–:Frame print
≥You cannot set page layouts not supported on 
the printer.
8Use the cursor button to select 
[ PRINT], then press the cursor 
button right to select [YES]. The 
pictures are printed.
≥Exit PictBridge by disconnecting the USB 
cable (supplied) after the pictures have been 
printed.
When you stop printing halfway
Press the cursor button down.
≥A confirmation message appears. If [YES] is selected, the settings are cancelled and 
the screen returns to the thumbnails. If [NO] is selected, the settings made in steps 5 
to 7 are kept and the screen returns to the thumbnails.
SETUP ENTERDATE PRINT
PAPER SIZE
STANDARD
PAGE LAYOUT
PRINT
PictBridge
YES
NO
SETUP ENTERDATE PRINT
PAPER SIZE
PAGE LAYOUT
PRINT
PictBridge
≥Avoid the following operations during 
printing. These operations disable proper 
printing. 
– Disconnecting the USB cable
– Removing the SD card
– Switching the mode dial
– Turning off the power≥Check the settings for the paper size, 
quality of print, etc. on the printer.
≥You cannot print pictures that cannot be 
played on this unit.
≥When the unit is connected directly to the 
printer, the DPOF settings cannot be 
used.
VQT0T50_PP_ENG.book  69 ページ  ２００５年８月３１日　水曜日　午後２時２５分 
						

							70VQT0T50
Images recorded by this unit can be played back on a TV.
¬Insert an SD card with recordings into the unit.
1Open the terminal cover and then 
connect the multi cable (supplied)  to 
the multi-connector terminal [MULTI] 
and the TV. 
1Multi cable (supplied)
Insert the plugs as far as they will go.
≥If the TV has an S-Video terminal, then also 
connect an S-Video plug. It allows you to 
enjoy more beautiful images. 
(You must also connect the Video/Audio input 
terminals.)
≥Use the AC adaptor to free you from worrying 
about the battery running down.
2Turn on this unit, then set the mode to 
[] or [ ].
3 Change the input channel on the TV.

Example: Set the channel to “VCR2” etc. (The channel set will differ depending on the 
terminal to which the cable is connected.)
4 Start playback on this unit. (P57, 60)
The image and audio are output on the TV.
∫If the image or audio from this unit is not output on the TV
≥Check that the plugs are inserted as far as they go.
≥Check the connected terminal.
≥You cannot playback motion pictures recorded to SD card on this unit by inserting the 
SD card into a TV with a built-in SD card slot.
≥Check the TV’s input setting (input switch). (For more information, please read 
the operating instructions for the TV.) 
Playback on TV
MULTI
[S-VIDEO IN][VIDEO IN]
[AUDIO IN]
1
PCPC
VQT0T50_PP_ENG.book  70 ページ  ２００５年８月３１日　水曜日　午後２時２５分