Panasonic Ramsa Audio Mixer Wr Da7 Users Guide

Chapter 14 
DA7 Users’ Guide14-21
14
Automation
AUTOMATION EXECUTE
Press the AUTOMATION button in the SETUPsection of the Top Panel
to display the [AUTOMATION EXECUTE]window. You may have to
press it again to cycle through the windows. 
Cursorto the [START SCENE],and press the ENTERbutton.
You will see this area blinking if nothing has been registered for the start
scene. Current status of fader positions, routings, Equalizer and
Dynamics is stored for the start scene.
Cursorto the desired parameter...

Chapter 14 
DA7 Users’ Guide14-22
14
Automation
Cursorto the[ENABLE]button in the [AUTOMATION]area, and press
the ENTERbutton.
Cursor to the [REC]button in the [AUTOMATION]area, and press the
ENTERbutton to start or stop recording.
Press the SELECTLED buttons of the Channel Stripsto be engaged
into a MIX sequence. The engaged SELECTLED buttons (orange)and
SEL/MAN(red)will light. Press it again to cancel. These buttons are
operable during playing back or recording of a MIX sequence.
Now, you are ready to...

Chapter 14 
DA7 Users’ Guide14-23
14
Automation
Editing of AUTOMATION EXECUTION
You can edit a MIX if there is something that you wish to change.
Stop the audio master device and switch off the SELECTLED buttons
for channels you do NOT wish to update. Press the SELECTLED
buttons to turn on the channels you wish to update.
Cursorto the [REC]button in the [AUTOMATION]area, and press the
ENTERbutton to start recording again
Start the audio master device from a point slightly in front of where you
will begin...

Editing with use of the [RELATIVE]button
After editing there may be a situation where you want to change something
in your MIX, such as the level of vocal in a chorus, while saving the other
fader moves you have made for that channel. This is where you would use
the [RELATIVE]button in the [FADER EDIT]area.
Cursorto the [RELATIVE]button in the [FADER EDIT]area, and press
the ENTERbutton.
Press only the SELECTLED button of the channel where you want to
change the level from [ABSOLUTE]to [RELATIVE]....

END of a MIX
From your mixdown, store the audio portion of the final MIX data to an
audio recording device such as DAT, CDR, etc.
Store the data into the memory (No 01 to 04 of the DA7). This may be
the easiest method, but since only four files are available the space is
very limited.
Save the MIX data to a computer or MIDI datafiler for future use or
editing.
Following are other ways to save the automation MIX.
• Send the bulk data via the TO PCterminal and store on HDD, FDD,
or other media via a...

DA7 Users’ Guide15-1
15
Scene
Memory
15-1 RD/WR (Read/Write) Window
The SCENE MEMORYsection of the DA7 is accessed from the Top Panel by
pressing either the READ or WRITE LED buttons. When either function is
on, its button will illuminate (orange). Press either button to display the
[SCENE MEMORY>RD/WR]window. Press either of these buttons again to
display the [SCENE MEMORY>XFADE TIME]window.
Scene Memory records all parameters globally for the DA7. When a scene is
recalled, the fader, fader group, mute...

This window allows you to record to the Scene Memory. Scene Memory can
be recorded globally for all 32 input channels, aux send and return, buses,
and master.
Button
Once you are in the [RD/WR]window, scroll the [No. Scene Name]field
with the JogDialto select the desired file. With the cursoron the 
button, press the ENTERbutton to recall a memory.
Button
To record a Scene Memory, select a Scene Name number. With the cursor on
the  button, press the ENTER button.
Button
In the [RD/WR]window, cursor to...

Button
When this parameter is selected, access to other global information is turned on.
Button
All of the parameters in the [READ PARAMETER]area are selected on or
off. Selected parameters appear as inverse video.
Button
All parameter selections in the [READ PARAMETER]area are deactivated.
[PROTECT CHANNEL SELECT]Area
Here you can identify which, if any, Channel Stripswill be protected:
INPUT 1-32, AUX RTN 1-6, AUX SND 1-6, BUS 1-8, or MASTER L/R. 
To protect a channel, move the cursor to a selected...

Writing a Scene Memory
Writing a Scene Memory uses the same procedure as READ. Select a memory
file number, move the cursor to the  button, and press the ENTER
button. The [MEMORY] display will flash for five seconds, indicating that the
settings have been written to the selected Scene Memory.
Input of Scene Memory Title
Press the ENTER button, when the cursor is over the  button, and the
[NAME EDITOR]window will appear over the [RD/WR] window. Alpha-
numeric characters can be input from the Keypador the...

Chapter 15 
DA7 Users’ Guide15-5
15
Scene
Memory
15-2 XFADE TIME Window
XFade Time sets a programmable crossfade duration to be executed when a
scene memory is changed.
[XFADE TIME CHANNEL SELECT]Area
This area lets you select crossfade time of INPUTS 1-32, AUX RTN 1-6, AUX
SND 1-6,BUS 1-8, and MASTER L/R.
Selecting of XFade Channel
Cursorto any channel number button, and press the ENTER button.
Button
Here all of the channels in the [XFADE TIME CHANNEL SELECT]area are
turned on, and all of the channel...