Panasonic Ramsa Audio Mixer Wr Da7 Users Guide

Chapter 16 
DA7 Users’ Guide16-11
16
Utility
[KEY LOCK AREA SELECT]
The [KEY LOCK AREA]lets you lock operational sections of the DA7,
preventing anyone without the password from operating a section or
sections of the mixer. The area diagram in the window shows areas that
can be locked, which will appear in inverse video when locked.
In the [KEY LOCK AREA]you will find two fields.
KEY LOCK AREA SELECT 

[PASSWORD]Field
This is a 4-digit field where you enter the password for controlling
access to the DA7. When the password is correct, both the [NEW
PASSWORD] field and the lock section field can be operated.
[NEW PASSWORD]Field
When you enter the correct password in the [PASSWORD]field, a new
4-digit password can be entered in the field using the Keypad.
Areas that can be locked by selecting the respective buttons are
, ,  (keypad), and . Selecting the
button locks the controls for the EQ,...

Chapter 16 
DA7 Users’ Guide16-13
16
Utility
16-4 Utility, User Custom (USER CSTM) Window
This window allows you to program which sources will be controlled by the
16 channels in the CUSTOM/MIDI Fader Layer.
The [FADER LAYER CUSTOMIZE ASSIGN TABLE]lets you assign sources
to the channels. The [ASSIGN CH](assign channel) selection can be any
source: inputs 1 through 32, aux returns 1 through 6, buses 1 through 8, and
aux sends 1 through 6. Cursorto the channel number that you want to
change, and rotate the...

DA7 Users’ Guide17-117
Options
The DA7has three option card slots on the Rear Panel. SLOT 1corresponds
to Channel 17-24, SLOT 2connects to Channel 25-32, and SLOT 3can
appear as Channel 9-16. Although SLOT 3has multiple functions when
SLOT 3is being used to bring sources into the DA7, the FLIP LED buttons
for those channels will change to (orange) to let you know you are using
the option slot inputs. Routing of SLOT 3is assigned in the [DIGITAL
INPUT SELECT]area of the [D-I/O>INPUT SET]window.
A separate...

Chapter 17
DA7 Users’ Guide17-217
Options
17-1 ADATDigital I/O Card, WR-ADAT
You can use the ADATcard with the DA7to connect an external ADAT
recorder. 
Connect the ADATcard to an ADAT recorder, with a pair of fiber cables, from
the In and Out of the ADATcard to the Out and In of the ADAT recorder.
To send a signal to the ADAT recorder, the [DIGITAL INPUT SELECT]
area of the [D-I/O>INPUT SET]window must be assigned to reflect the
routing being used to feed the ADAT recorder. When the ADATcard is used
in...

Connections
With the power to the DA7off, insert two optional ADAT cards into SLOT 1
and SLOT 2. Carefully screw these cards into their respective slots in the
DA7so they are properly grounded. Each ADAT machine is connected to an
option card via two optical cables, one In and one Out. The 8-track ADAT
signal in SLOT 1is assigned to inputs 17-24, and the 8-track ADAT signal in
SLOT 2is assigned to inputs 25-32.
The output sources into the ADAT can be selected from the [D-I/O>SLOT
OUT]window.
Refer to...

Connections
Insert two optional ADAT cards into SLOT 1and SLOT 2. Carefully screw
these cards into their respective slots in the DA7so they are properly
grounded. Each ADAT machine is connected to an option card via two optical
cables, one In and one Out. The 8-track ADAT signal in SLOT 1is assigned to
inputs 17-24, and the 8-track ADAT signal in SLOT 2is assigned to inputs 25-
32. 
The output sources into the ADAT can be selected from the [D-I/O>SLOT
OUT]window.
Refer to Chapter 12, D-I/Ofor additional...

17-2 TDIF (TASCAM Digital Audio Interface) Card,
WR-TDIF
Use the TDIFcard with the DA7to connect an external digital tape recorder,
such as the TASCAM DA-88.
DA88 + DA7
This diagram will help you set up a pair of DA88 DTRs with the DA7using
one of the DA88s as the Word Clock master.Chapter 17
DA7 Users’ Guide17-517
Options
WR-TDIF
TDIF Digital I/O Card
TASCAM DIGITAL AUDIO INTERFACE
(TDIF-1)
TDIF Digital I/O Card
DA88 + DA7 GRAPHIC
DA88 ID1
DA88 ID0
SYNC IN
SYNC OUTWCK master
WCK OUT
EFX Device...

Chapter 17
DA7 Users’ Guide17-617
Options
Connections
With the power to the DA7off, insert a TDIF option card into both SLOT 1
and SLOT 2. Carefully screw these cards into their respective slots in the
DA7so they are properly grounded. The DA88 8-track signal from SLOT 1is
assigned to inputs 17-24. The DA88 8-track signal from the SLOT 2card is
assigned to inputs 25-32.
The output sources into the DA88 can be selected from the [D-I/O>SLOT
OUT]window.
Refer to Chapter 12, D-I/Ofor additional information....

Chapter 17
DA7 Users’ Guide17-717
Options
17-3 AES/EBU & S/PDIF Card, WR-AESS
AES/EBU (Audio Engineering Society/European Broadcasting Union) is a
digital audio interface standard used in most modern professional
equipment. S/PDIF (Sony/Phillips Digital InterFace) is the standard interface
used by many consumer-level components. This option card has four toggle
switches, located on the card itself, to choose the output signal, either the
AES/EBU (RS-422/110 ½) or S/PDIF (0.5 V[p-p]/75½). The status...