Panasonic Ramsa Audio Mixer Wr Da7 Users Guide

Appendix D
DA7 Users’ GuideD-5
D   
Default
Settings
MIDI REMOTE NO. ALL
Rx ON/OFF OFF
INTERVAL 0
MIDI REMOTE FADER SELECT 1-8
EDIT OFF
SOLO SW ON/OFF OFF (16 ch)
TABLE SW1
COMMAND MODE CTRL CHG
SW STS OFF
CTRL CHG NO/FREE DEF 0
TITLE TITLE
ON SW ON/OFF OFF
TABLE SW1
COMMAND MODE CTRL CHG
SW STS OFF
CTRL CHG NO/FREE DEF 0
TITLE TITLE
PAN KNOB          LEVEL OFF
TABLE KNOB1
COMMAND MODE CTRL CHG
SW STS OFF
CTRL CHG NO/FREE DEF 0
TITLE TITLE
FADER LEVEL OFF
TABLE FADER1
COMMAND MODE CTRL CHG
CTRL CHG...

CH5 BUS5
CH6 BUS6
CH7 BUS7
CH8 BUS8
SLOT3 MODE NORMAL
CH1 BUS1
CH2 BUS2
CH3 BUS3
CH4 BUS4
CH5 BUS5
CH6 BUS6
CH7 BUS7
CH8 BUS8
TANDEM ON/OFF ON
DELAY 0 (sample)
DELAY AUTO ON
PORT SELECT MIDI ON
DITHER REC OUT ON/OFF OFF
BIT 23
AUX SEND1/2       ON/OFF OFF
BIT 23
SLOT1 CH1/2 ON/OFF OFF
BIT 23
CH3/4 ON/OFF OFF
BIT 23
CH5/6 ON/OFF OFF
BIT 23
CH7/8 ON/OFF OFF
BIT 23
SLOT2 CH1/2 ON/OFF OFF
BIT 23
CH3/4 ON/OFF OFF
BIT 23
CH5/6 ON/OFF OFF
BIT 23
CH7/8 ON/OFF OFF
BIT 23
SLOT3 CH1/2 ON/OFF OFF
BIT 23
CH3/4 ON/OFF...

Appendix D
DA7 Users’ GuideD-7
D   
Default
Settings
GROUP4            ON/OFF ON
MUTE GROUP GROUP1            ON/OFF ON
GROUP2            ON/OFF ON
GROUP3            ON/OFF ON
GROUP4            ON/OFF ON
INPUT METER RESPONSE VU
PEAK HOLD OFF
POSITION PST FDR
BUS/AUX METER POSITION PRE EQ
AUTOMATION EXEC OFFSET 0
AUTOMATION ENABLE/DISABLE DISABLE
TIME BASE TIMEBASE INT
FRAME --
MMC LOCATE POINT 1 0
20
30
40
50
60
EDIT PARAMETER FADER OFF
CH OFF
EQ OFF
PAN/SURR OFF
AUX SND OFF
AUX SND NO. ALL
LIB OFF
SCENE...

MUTE GROUP ON
EQUALIZER ON
DYNAMICS ON
OTHERS ON
PROTECT CHANNEL SELECT OFF (all ch)
FADE TIME FADE CHANNEL SELECT OFF (all ch)
FADE TIME 0
SURROUND SURROUND ENABLE/DISABLE DISABLE
SURROUND MODE SEND VOL
LR:C 0:10
JOG SPEED SLOW
MOVE MODE      RETURN OFF
REPEAT OFF
REVERSE OFF
AUTO MOVE TIME 10sec.
SEND LEVEL       L (BUS1) -
°
R (BUS2) -°
C (BUS3) -°
SB (BUS4) -°
SL (BUS5) -°
SR (BUS6) -°
CURRENT POSITION FR C (center)
LR C (center)
PANEL AUTOMATION LED AUX
FLIP OFF (all fader)
LAYER INPUT 1-16
MULTI CH...

DA7 Users’ GuideE-1
E  
Cables &
Connections
The information in this appendix provides recommended cables, and details
cable pin wiring connections for use with the DA7 and the various option
cards noted in Chapter 17, Options.
TO PC Cable
A Printer Cable illustrated below is recommended. This is used to connect
two DA7s each other, or between the DA7and the serial port of a Macintosh
computer.
TO PC cable to connect with a Windows computer is shown below.
Note: Recommended Panasonic cables, described in...

Y Cable for AUX Sends and AUX Returns
This is used to connect external analog devices withAUX SEND 3/4, 5/6and
AUX RETURN 3/4, 5/6connectors on the DA7’s Rear Panel.
SMPTE Option Card
This cable is used to supply the SMPTE timecode, often generated by a video
deck, to the SMPTE Option Cardinstalled in the DA7. Appendix E
DA7 Users’ GuideE-2
E  
Cables &
Connections
Even CH
GND
Odd CHOdd CH
Even CH
GND
Tip
Ring
Sleeve
GND
Hot
Cold
GNDHot
Cold
GND
Tip
Ring
Sleeve
1 2
3
Y Cable
SMPTE timecode Cable
1/4”...

Appendix E
DA7 Users’ GuideE-3
E  
Cables &
Connections
TANDEM Option Card
One of the Panasonic Premium Cables, part # DA/DB-DB(DB-25 to DB-25,
Length 1 meter) is recommended.
See drawings below when you build a customized cable. 
Name              Pin#
PWRFAILO            1
FG                         2
PWRFAILI            14
FG                       17
CKO -                    3
CKO+                  15 
256O -                   4
256O+                 16
CASO3+                5
CASO3 -              18...

Appendix E
DA7 Users’ GuideE-4
E  
Cables &
Connections
AES/EBU S/PDIF Option Card
Panasonic part # DA/DB-AES (DB-25 to 4 Male XLR/ 4 Female XLR, 110 ½
Length 3 meters) is recommended for connection with AES/EBU equipment. 
For S/PDIF devices, you need a breakout cable with RCA connectors on the
tail.
114
1325Hot
Cold
GND
Hot
Cold
GND
Hot
Cold
GND
Hot
Cold
GND
Hot
Cold
GND
Hot
Cold
GND
Hot
Cold
GND
Hot
Cold
GNDCH 7, 8 
CH 5, 6 
CH 3, 4 
CH 1, 2 
CH 7, 8 
CH 5, 6
CH 3, 4 
CH 1, 2
Output 
Input 
1 2
3Hot...

Appendix E
DA7 Users’ GuideE-5
E  
Cables &
Connections
AD/DA Option Card
Panasonic part # DA/DB-XLRF (DB-25 to 8 Female XLR, Length 3 meters)
and Panasonic part # DA/DB-XLRM(DB-25 to 8 Male XLR, Length 3 meters)
are recommended.
Note: Make sure to use DB-25 that are less wider than 55.5 mm (2-3/16 inches) when building cables.
Connections both CN2 and CN3 to the AD/DA card will not be able if connectors are wider than 55.5
mm.
1
14
13 25Hot
Cold
GND
Hot
Cold
GND
Hot
Cold
GND
Hot
Cold
GND
Hot
Cold
GND...

TDIF Option Card
The recommended cable for use with this card is Panasonic part # DA/DB-
TDIF(DB-25 to DB-25(TDIF), Length 3 meters).Appendix E
DA7 Users’ GuideE-6
E  
Cables &
Connections