Panasonic Pv Vm202 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Pv Vm202 Operating Instructions Manual. The Panasonic manuals for Digital Camcorder are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
51
Check if Palmcorder is correctly recognized
1Verify [Removable Disk] icon is added in [My Computer].
≥Drive name (H: etc.) may vary depending on your computer.
≥If Palmcorder is connected to the computer before the driver is installed, or
you are using the driver that came with Windows, then it may not be able to
correctly recognize Palmcorder.
≥If it doesn’t function properly, check to see if the driver was correctly
installed, and update the driver if necessary.
~~~~~~~~~~~~~~~~~~~~~~~~~To...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-50.png "Page 51
51
Check if Palmcorder is correctly recognized
1Verify [Removable Disk] icon is added in [My Computer].
≥Drive name (H: etc.) may vary depending on your computer.
≥If Palmcorder is connected to the computer before the driver is installed, or
you are using the driver that came with Windows, then it may not be able to
correctly recognize Palmcorder.
≥If it doesn’t function properly, check to see if the driver was correctly
installed, and update the driver if necessary.
~~~~~~~~~~~~~~~~~~~~~~~~~To...")
51 Check if Palmcorder is correctly recognized 1Verify [Removable Disk] icon is added in [My Computer]. ≥Drive name (H: etc.) may vary depending on your computer. ≥If Palmcorder is connected to the computer before the driver is installed, or you are using the driver that came with Windows, then it may not be able to correctly recognize Palmcorder. ≥If it doesn’t function properly, check to see if the driver was correctly installed, and update the driver if necessary. ~~~~~~~~~~~~~~~~~~~~~~~~~To...
Page 52
![Page 52
52
Verifying and updating driver
Windows 98 SE
Verify and update driver while Palmcorder is connected to the computer.
ªVerifying driver
(Palmcorder must be connected to computer)
1
Select [Start] >> [Settings] >> [Control Panel], double click
[System] select device driver tab, verify [Panasonic DVC
USB Driver] and [Panasonic DVC Port Driver] are displayed
in [Universal Serial Bus controllers] of [Device Manager].
≥If [DVC] is displayed in [Other devices] of [Device Manager] tab, we
recommend...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-51.png "Page 52
52
Verifying and updating driver
Windows 98 SE
Verify and update driver while Palmcorder is connected to the computer.
ªVerifying driver
(Palmcorder must be connected to computer)
1
Select [Start] >> [Settings] >> [Control Panel], double click
[System] select device driver tab, verify [Panasonic DVC
USB Driver] and [Panasonic DVC Port Driver] are displayed
in [Universal Serial Bus controllers] of [Device Manager].
≥If [DVC] is displayed in [Other devices] of [Device Manager] tab, we
recommend...")
52 Verifying and updating driver Windows 98 SE Verify and update driver while Palmcorder is connected to the computer. ªVerifying driver (Palmcorder must be connected to computer) 1 Select [Start] >> [Settings] >> [Control Panel], double click [System] select device driver tab, verify [Panasonic DVC USB Driver] and [Panasonic DVC Port Driver] are displayed in [Universal Serial Bus controllers] of [Device Manager]. ≥If [DVC] is displayed in [Other devices] of [Device Manager] tab, we recommend...
Page 53
![Page 53
53
Windows 2000Professional
Verify and update driver while Palmcorder is connected to the computer.
ªVerify driver
(Palmcorder must be connected to computer)
1
Select [Start] >> [Settings] >> [Control Panel], double click
[System] Hardware tab, Device Manager. Verify
[Panasonic DVC USB Driver] and [USB Root Hub] in
[Universal Serial Bus controllers] of [Device Manager] of
[Hardware].
≥If [USB Mass Storage Device] is shown in [Universal Serial Bus
controllers] of [Device Manager] tab, we recommend...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-52.png "Page 53
53
Windows 2000Professional
Verify and update driver while Palmcorder is connected to the computer.
ªVerify driver
(Palmcorder must be connected to computer)
1
Select [Start] >> [Settings] >> [Control Panel], double click
[System] Hardware tab, Device Manager. Verify
[Panasonic DVC USB Driver] and [USB Root Hub] in
[Universal Serial Bus controllers] of [Device Manager] of
[Hardware].
≥If [USB Mass Storage Device] is shown in [Universal Serial Bus
controllers] of [Device Manager] tab, we recommend...")
53 Windows 2000Professional Verify and update driver while Palmcorder is connected to the computer. ªVerify driver (Palmcorder must be connected to computer) 1 Select [Start] >> [Settings] >> [Control Panel], double click [System] Hardware tab, Device Manager. Verify [Panasonic DVC USB Driver] and [USB Root Hub] in [Universal Serial Bus controllers] of [Device Manager] of [Hardware]. ≥If [USB Mass Storage Device] is shown in [Universal Serial Bus controllers] of [Device Manager] tab, we recommend...
Page 54
![Page 54
54
Windows Me
Verify and update driver while Palmcorder is connected to the computer.
ªVerifying driver
(Palmcorder must be connected to computer)
1
Select [Start] >> [Settings] >> [Control Panel], double click
[System], Device Manager tab and verify [Panasonic DVC
USB Driver] is displayed in [Universal Serial Bus controllers]
of [Device Manager].
≥If [USB Mass Storage Device] is displayed in [Universal Serial Bus
controllers] of [Device Manager] tab, we recommend updating the driver
by following...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-53.png "Page 54
54
Windows Me
Verify and update driver while Palmcorder is connected to the computer.
ªVerifying driver
(Palmcorder must be connected to computer)
1
Select [Start] >> [Settings] >> [Control Panel], double click
[System], Device Manager tab and verify [Panasonic DVC
USB Driver] is displayed in [Universal Serial Bus controllers]
of [Device Manager].
≥If [USB Mass Storage Device] is displayed in [Universal Serial Bus
controllers] of [Device Manager] tab, we recommend updating the driver
by following...")
54 Windows Me Verify and update driver while Palmcorder is connected to the computer. ªVerifying driver (Palmcorder must be connected to computer) 1 Select [Start] >> [Settings] >> [Control Panel], double click [System], Device Manager tab and verify [Panasonic DVC USB Driver] is displayed in [Universal Serial Bus controllers] of [Device Manager]. ≥If [USB Mass Storage Device] is displayed in [Universal Serial Bus controllers] of [Device Manager] tab, we recommend updating the driver by following...
Page 55
![Page 55
55
Windows XP
Verify the driver while Palmcorder is connected to the computer.
ªVerifying driver
(Palmcorder must be connected to computer)
1
Select [Start] >> [Control Panel] >>
[Performance and Maintenance], double click [System],
Hardware tab, Device Manager.
Please make sure that you can see the following drivers that come with
Windows.
1. Matsushita DVC USB Device
2. Generic Volume
3. USB Mass Storage Device
~~~~~~~~~~~~~~~~~~~~~~~~~If you no longer need software or driver (uninstall)...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-54.png "Page 55
55
Windows XP
Verify the driver while Palmcorder is connected to the computer.
ªVerifying driver
(Palmcorder must be connected to computer)
1
Select [Start] >> [Control Panel] >>
[Performance and Maintenance], double click [System],
Hardware tab, Device Manager.
Please make sure that you can see the following drivers that come with
Windows.
1. Matsushita DVC USB Device
2. Generic Volume
3. USB Mass Storage Device
~~~~~~~~~~~~~~~~~~~~~~~~~If you no longer need software or driver (uninstall)...")
55 Windows XP Verify the driver while Palmcorder is connected to the computer. ªVerifying driver (Palmcorder must be connected to computer) 1 Select [Start] >> [Control Panel] >> [Performance and Maintenance], double click [System], Hardware tab, Device Manager. Please make sure that you can see the following drivers that come with Windows. 1. Matsushita DVC USB Device 2. Generic Volume 3. USB Mass Storage Device ~~~~~~~~~~~~~~~~~~~~~~~~~If you no longer need software or driver (uninstall)...
Page 56
56 Notes ≥Do not disconnect USB Connection Cable while the operation light of Palmcorder is on. It may freeze the software or destroy the data in transfer. Please refer to the user manual of Palmcorder. ≥We recommend using AC adapter as the power source for the Palmcorder when using USB Connection Kit. Data may be lost If the battery power is lost while transferring data. ≥ G726 may not recognize memory card files not created by Palmcorder. ≥Do not delete the folders in memory card such as picture...
Page 57
![Page 57
57
Others
Indications
Various functions and Palmcorder conditions are displayed
on the screen.
1) Remaining Battery Power [r]
≥When the battery power becomes low, the indication
changes. When the battery is discharged completely,
the
u ( v) Indication flashes.
≥When you are using the AC Adaptor, the [s]
Indication may appear, however, this has no meaning
in this case.
2) Remaining Tape Time [R0:00]
≥Remaining tape time is indicated in minutes. When it
reaches less than 3 minutes, the indication...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-56.png "Page 57
57
Others
Indications
Various functions and Palmcorder conditions are displayed
on the screen.
1) Remaining Battery Power [r]
≥When the battery power becomes low, the indication
changes. When the battery is discharged completely,
the
u ( v) Indication flashes.
≥When you are using the AC Adaptor, the [s]
Indication may appear, however, this has no meaning
in this case.
2) Remaining Tape Time [R0:00]
≥Remaining tape time is indicated in minutes. When it
reaches less than 3 minutes, the indication...")
57 Others Indications Various functions and Palmcorder conditions are displayed on the screen. 1) Remaining Battery Power [r] ≥When the battery power becomes low, the indication changes. When the battery is discharged completely, the u ( v) Indication flashes. ≥When you are using the AC Adaptor, the [s] Indication may appear, however, this has no meaning in this case. 2) Remaining Tape Time [R0:00] ≥Remaining tape time is indicated in minutes. When it reaches less than 3 minutes, the indication...
Page 58
![Page 58
58
12) Recording Mode
≥AUTO: This appears when Mode Selector Switch is
set to [AUTO]. (l 20)
≥MNL: This appears when Mode Selector Switch is
set to [MANUAL]. (l 23, 24, 25)
Electronic Image Stabilizer [EIS] (l 22)
Audio Dubbing Input Display [MIC/AV IN] (l 33)
Audio Recording Mode [12bit/16bit] (l 33)
13) Manual Focus [MF] (l 24)
Backlight Mode [ª] (l 23)
Program AE Mode
≥5: Sports Mode (l 23)
≥7: Portrait Mode (l 23)
≥4: Low Light Mode (l 23)
≥Ω: Spotlight Mode (l 23)
≥º: Surf & Snow Mode (l 23)
14)...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-57.png "Page 58
58
12) Recording Mode
≥AUTO: This appears when Mode Selector Switch is
set to [AUTO]. (l 20)
≥MNL: This appears when Mode Selector Switch is
set to [MANUAL]. (l 23, 24, 25)
Electronic Image Stabilizer [EIS] (l 22)
Audio Dubbing Input Display [MIC/AV IN] (l 33)
Audio Recording Mode [12bit/16bit] (l 33)
13) Manual Focus [MF] (l 24)
Backlight Mode [ª] (l 23)
Program AE Mode
≥5: Sports Mode (l 23)
≥7: Portrait Mode (l 23)
≥4: Low Light Mode (l 23)
≥Ω: Spotlight Mode (l 23)
≥º: Surf & Snow Mode (l 23)
14)...")
58 12) Recording Mode ≥AUTO: This appears when Mode Selector Switch is set to [AUTO]. (l 20) ≥MNL: This appears when Mode Selector Switch is set to [MANUAL]. (l 23, 24, 25) Electronic Image Stabilizer [EIS] (l 22) Audio Dubbing Input Display [MIC/AV IN] (l 33) Audio Recording Mode [12bit/16bit] (l 33) 13) Manual Focus [MF] (l 24) Backlight Mode [ª] (l 23) Program AE Mode ≥5: Sports Mode (l 23) ≥7: Portrait Mode (l 23) ≥4: Low Light Mode (l 23) ≥Ω: Spotlight Mode (l 23) ≥º: Surf & Snow Mode (l 23) 14)...
Page 59
![Page 59
59
ªChanging the Counter Display Mode
By changing [C.DISPLAY] on the [DISPLAY SETUP]
Sub-Menu, you can change the Counter Display Mode to
Tape Counter Indication (0:00.00), Memory Counter
Indication (M0:00.00), and Time Code Indication
(0h00m00s00f).
≥You can also press the [COUNTER] Button of the Remote
Controller repeatedly to change the Counter Indication.
ªDisplaying Date/Time Indication
To display Date/Time Indication, set the appropriate
date/time in [DATE/TIME] on the [DISPLAY SETUP]...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-58.png "Page 59
59
ªChanging the Counter Display Mode
By changing [C.DISPLAY] on the [DISPLAY SETUP]
Sub-Menu, you can change the Counter Display Mode to
Tape Counter Indication (0:00.00), Memory Counter
Indication (M0:00.00), and Time Code Indication
(0h00m00s00f).
≥You can also press the [COUNTER] Button of the Remote
Controller repeatedly to change the Counter Indication.
ªDisplaying Date/Time Indication
To display Date/Time Indication, set the appropriate
date/time in [DATE/TIME] on the [DISPLAY SETUP]...")
59 ªChanging the Counter Display Mode By changing [C.DISPLAY] on the [DISPLAY SETUP] Sub-Menu, you can change the Counter Display Mode to Tape Counter Indication (0:00.00), Memory Counter Indication (M0:00.00), and Time Code Indication (0h00m00s00f). ≥You can also press the [COUNTER] Button of the Remote Controller repeatedly to change the Counter Indication. ªDisplaying Date/Time Indication To display Date/Time Indication, set the appropriate date/time in [DATE/TIME] on the [DISPLAY SETUP]...
Page 60
![Page 60
60
Notes & Precautions
ªPower-Related Items (l 12)
≥When the Palmcorder is used for a long time, the Camera
body becomes warm, but this is not a malfunction.
≥If the [CHARGE] Lamp does not light up, although the
Battery is attached, detach the Battery, and reattach it.
ªInserting/Ejecting the Cassette (l 13)
≥In the case of using a previously recorded Cassette, you
can use the Camera Search Function to find the position
where you want to continue recording.
≥If a new Cassette is inserted, rewind to...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-59.png "Page 60
60
Notes & Precautions
ªPower-Related Items (l 12)
≥When the Palmcorder is used for a long time, the Camera
body becomes warm, but this is not a malfunction.
≥If the [CHARGE] Lamp does not light up, although the
Battery is attached, detach the Battery, and reattach it.
ªInserting/Ejecting the Cassette (l 13)
≥In the case of using a previously recorded Cassette, you
can use the Camera Search Function to find the position
where you want to continue recording.
≥If a new Cassette is inserted, rewind to...")
60 Notes & Precautions ªPower-Related Items (l 12) ≥When the Palmcorder is used for a long time, the Camera body becomes warm, but this is not a malfunction. ≥If the [CHARGE] Lamp does not light up, although the Battery is attached, detach the Battery, and reattach it. ªInserting/Ejecting the Cassette (l 13) ≥In the case of using a previously recorded Cassette, you can use the Camera Search Function to find the position where you want to continue recording. ≥If a new Cassette is inserted, rewind to...