Panasonic Pv Vm202 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Pv Vm202 Operating Instructions Manual. The Panasonic manuals for Digital Camcorder are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
31
Playback Zoom Function
A part of the image can be enlarged up to 10 times during playback.
1During playback, press the Playback Zoom Button
[P.B. ZOOM] on the Remote Controller.
≥The center of the image is enlarged to approximately double the size.
Changing the Zoom Magnification
2Change the magnification by pressing the [W] or [T] Button
on the Remote Controller.
≥You can increase the magnification up to 10k.
Changing the enlarged area of an image
3Press the Arrow Button (π, ∑, ∏, ∫) on the Remote...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-30.png "Page 31
31
Playback Zoom Function
A part of the image can be enlarged up to 10 times during playback.
1During playback, press the Playback Zoom Button
[P.B. ZOOM] on the Remote Controller.
≥The center of the image is enlarged to approximately double the size.
Changing the Zoom Magnification
2Change the magnification by pressing the [W] or [T] Button
on the Remote Controller.
≥You can increase the magnification up to 10k.
Changing the enlarged area of an image
3Press the Arrow Button (π, ∑, ∏, ∫) on the Remote...")
31 Playback Zoom Function A part of the image can be enlarged up to 10 times during playback. 1During playback, press the Playback Zoom Button [P.B. ZOOM] on the Remote Controller. ≥The center of the image is enlarged to approximately double the size. Changing the Zoom Magnification 2Change the magnification by pressing the [W] or [T] Button on the Remote Controller. ≥You can increase the magnification up to 10k. Changing the enlarged area of an image 3Press the Arrow Button (π, ∑, ∏, ∫) on the Remote...
Page 32
![Page 32
32ªPlaying Back with Multi-Picture Mode
Strobe Multi-Picture Mode [STROBE] 1:
You can capture 9 consecutive still pictures from playback images.
Manual Multi-Picture Mode [MANUAL]
2:
Selecting a desired still picture one at a time, you can capture 9 still pictures.
Index Multi-Picture Mode ([PHOTO], [SCENE])
3:
You can capture 9 screens of pictures to which index signals are attached.
After setting [VCR FUNCTIONS] >> [DIGITAL EFFECT] >>
[EFFECT SELECT] >> [MULTI].....
1Set [MULTI-PICTURES] >> [SCAN...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-31.png "Page 32
32ªPlaying Back with Multi-Picture Mode
Strobe Multi-Picture Mode [STROBE] 1:
You can capture 9 consecutive still pictures from playback images.
Manual Multi-Picture Mode [MANUAL]
2:
Selecting a desired still picture one at a time, you can capture 9 still pictures.
Index Multi-Picture Mode ([PHOTO], [SCENE])
3:
You can capture 9 screens of pictures to which index signals are attached.
After setting [VCR FUNCTIONS] >> [DIGITAL EFFECT] >>
[EFFECT SELECT] >> [MULTI].....
1Set [MULTI-PICTURES] >> [SCAN...")
32ªPlaying Back with Multi-Picture Mode Strobe Multi-Picture Mode [STROBE] 1: You can capture 9 consecutive still pictures from playback images. Manual Multi-Picture Mode [MANUAL] 2: Selecting a desired still picture one at a time, you can capture 9 still pictures. Index Multi-Picture Mode ([PHOTO], [SCENE]) 3: You can capture 9 screens of pictures to which index signals are attached. After setting [VCR FUNCTIONS] >> [DIGITAL EFFECT] >> [EFFECT SELECT] >> [MULTI]..... 1Set [MULTI-PICTURES] >> [SCAN...
Page 33
![Page 33
33
Playing Back on Your TV
By connecting your Palmcorder with your TV, the recorded scenes can be
viewed on your TV screen.
≥Before connecting them, turn off the power of both the Palmcorder and TV.
1Connect the [A/V IN/OUT] Jack of the Palmcorder to the
Video and Audio Input Jacks of the TV.
≥Using the A/V Cable 1 (supplied), make a connection with the TV. If
the TV has an S-Video Jack, connect the S-Video Cable (not supplied)
2, too.
Making the Indications Appear on the TV screen
Press the [OSD]...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-32.png "Page 33
33
Playing Back on Your TV
By connecting your Palmcorder with your TV, the recorded scenes can be
viewed on your TV screen.
≥Before connecting them, turn off the power of both the Palmcorder and TV.
1Connect the [A/V IN/OUT] Jack of the Palmcorder to the
Video and Audio Input Jacks of the TV.
≥Using the A/V Cable 1 (supplied), make a connection with the TV. If
the TV has an S-Video Jack, connect the S-Video Cable (not supplied)
2, too.
Making the Indications Appear on the TV screen
Press the [OSD]...")
33 Playing Back on Your TV By connecting your Palmcorder with your TV, the recorded scenes can be viewed on your TV screen. ≥Before connecting them, turn off the power of both the Palmcorder and TV. 1Connect the [A/V IN/OUT] Jack of the Palmcorder to the Video and Audio Input Jacks of the TV. ≥Using the A/V Cable 1 (supplied), make a connection with the TV. If the TV has an S-Video Jack, connect the S-Video Cable (not supplied) 2, too. Making the Indications Appear on the TV screen Press the [OSD]...
Page 34
34 Special Features DV Camera Style and SD Camera Style This is a Digital Video Camera which can be used in two ways depending on the situation. One is the DV Camera Style 1 which combines the Camera Unit 2 and Video Unit 3, and the other is the SD Camera Style 4 which combines the Camera Unit 2 and the supplied Battery Adaptor Unit 5. DV Camera Style ≥Both Tape and Card can be used. SD Camera Style ≥It is easy to carry, because it’s small and lightweight. ≥Tape cannot be used....
Page 35
35 1 3 42 A ACCESS CARD EJECT65 1 F 7640 1 TAPE CARD 5 PHOTO SHOT 3, 4 3W.B./SHUTTER/IRIS/ MF/VOL/JOG PUSH1 2 STILL MPEG4 VOICE CARD MODE2 BACKLIGHT CAMERA STILL Using a Memory Card A Card can be used to record files or play back files. ≥Use genuine SD Memory Card or MultiMediaCard only. ªInserting a Memory Card Before inserting a Memory Card, be sure to turn off the Palmcorder. 1While holding the Memory Card with its cut off corner A facing right 1, insert it into the Card Slot 2. ≥The display of the...
Page 36
![Page 36
36
F 7640
1, 2
TAPE
CARD
4, 4
PHOTO
SHOT
3, 1
3, 1W.B./SHUTTER/IRIS/
MF/VOL/JOG
PUSH1 2
ACCESS CAMERA
CARD P. B.
VCR
STILL
RESETMPEG4 VOICE
CARD
MODE2, 3
OFF ONMODE
4BACKLIGHT
CAMERA
STILL
POWER
ªCard PhotoShot (continued)
Recording from a Cassette (VCR Mode)
1Slide the [TAPE/CARD] Selector to [CARD].
2Slide the [STILL/MPEG4/VOICE] Selector to [STILL].
3Set [VCR FUNCTIONS] >> [CARD SETUP] >>
[PICTURE QUALITY] >> a desired picture quality.
4Start playback and press the [PHOTO SHOT] Button at the
scene...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-35.png "Page 36
36
F 7640
1, 2
TAPE
CARD
4, 4
PHOTO
SHOT
3, 1
3, 1W.B./SHUTTER/IRIS/
MF/VOL/JOG
PUSH1 2
ACCESS CAMERA
CARD P. B.
VCR
STILL
RESETMPEG4 VOICE
CARD
MODE2, 3
OFF ONMODE
4BACKLIGHT
CAMERA
STILL
POWER
ªCard PhotoShot (continued)
Recording from a Cassette (VCR Mode)
1Slide the [TAPE/CARD] Selector to [CARD].
2Slide the [STILL/MPEG4/VOICE] Selector to [STILL].
3Set [VCR FUNCTIONS] >> [CARD SETUP] >>
[PICTURE QUALITY] >> a desired picture quality.
4Start playback and press the [PHOTO SHOT] Button at the
scene...")
36 F 7640 1, 2 TAPE CARD 4, 4 PHOTO SHOT 3, 1 3, 1W.B./SHUTTER/IRIS/ MF/VOL/JOG PUSH1 2 ACCESS CAMERA CARD P. B. VCR STILL RESETMPEG4 VOICE CARD MODE2, 3 OFF ONMODE 4BACKLIGHT CAMERA STILL POWER ªCard PhotoShot (continued) Recording from a Cassette (VCR Mode) 1Slide the [TAPE/CARD] Selector to [CARD]. 2Slide the [STILL/MPEG4/VOICE] Selector to [STILL]. 3Set [VCR FUNCTIONS] >> [CARD SETUP] >> [PICTURE QUALITY] >> a desired picture quality. 4Start playback and press the [PHOTO SHOT] Button at the scene...
Page 37
![Page 37
37
ªAutomatically copying still pictures recorded on a
cassette
The Palmcorder copies images automatically, referring to Photo Index
signals.
After setting the Palmcorder to the VCR Mode (l 28).....
1Set the Palmcorder to Still Playback Mode just before the
point where picture transfer is to commence.
2Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >>
[RECORD TO CARD] >> [YES].
≥Search starts from the current Cassette position, and images with
Photo Index signals are recorded onto the Card...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-36.png "Page 37
37
ªAutomatically copying still pictures recorded on a
cassette
The Palmcorder copies images automatically, referring to Photo Index
signals.
After setting the Palmcorder to the VCR Mode (l 28).....
1Set the Palmcorder to Still Playback Mode just before the
point where picture transfer is to commence.
2Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >>
[RECORD TO CARD] >> [YES].
≥Search starts from the current Cassette position, and images with
Photo Index signals are recorded onto the Card...")
37 ªAutomatically copying still pictures recorded on a cassette The Palmcorder copies images automatically, referring to Photo Index signals. After setting the Palmcorder to the VCR Mode (l 28)..... 1Set the Palmcorder to Still Playback Mode just before the point where picture transfer is to commence. 2Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >> [RECORD TO CARD] >> [YES]. ≥Search starts from the current Cassette position, and images with Photo Index signals are recorded onto the Card...
Page 38
![Page 38
38ªRecording Moving Pictures
(MPEG4)
You can record moving pictures for e-mailing on a Memory Card. The
recorded data can be also played back on Windows Media Player.
Recording from the Palmcorder Lens (Camera Mode)
1Slide the [TAPE/CARD] Selector to [CARD].
2Slide the [STILL/MPEG4/VOICE] Selector to [MPEG4].
3Press the Recording Start/Stop Button.
≥It takes 2 to 3 seconds to start recording.
≥During recording, the [ ] Indication is lit in red.
≥The maximum continuous recording time is 60 minutes.
The...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-37.png "Page 38
38ªRecording Moving Pictures
(MPEG4)
You can record moving pictures for e-mailing on a Memory Card. The
recorded data can be also played back on Windows Media Player.
Recording from the Palmcorder Lens (Camera Mode)
1Slide the [TAPE/CARD] Selector to [CARD].
2Slide the [STILL/MPEG4/VOICE] Selector to [MPEG4].
3Press the Recording Start/Stop Button.
≥It takes 2 to 3 seconds to start recording.
≥During recording, the [ ] Indication is lit in red.
≥The maximum continuous recording time is 60 minutes.
The...")
38ªRecording Moving Pictures (MPEG4) You can record moving pictures for e-mailing on a Memory Card. The recorded data can be also played back on Windows Media Player. Recording from the Palmcorder Lens (Camera Mode) 1Slide the [TAPE/CARD] Selector to [CARD]. 2Slide the [STILL/MPEG4/VOICE] Selector to [MPEG4]. 3Press the Recording Start/Stop Button. ≥It takes 2 to 3 seconds to start recording. ≥During recording, the [ ] Indication is lit in red. ≥The maximum continuous recording time is 60 minutes. The...
Page 39
![Page 39
39
Playing Back Files from the Memory Card
It allows you to play back files recorded on a Card.
≥When you set the Palmcorder to Card Playback Mode, the Card Contents
1 are displayed to inform you which kind(s) of data (still picture, moving
picture and/or voice data) are recorded on the Card.
ªPlaying back Still Pictures
1
Set the Palmcorder to Card Playback Mode.
≥The [CARD P.B.] Lamp lights up.
2Set the [STILL/MPEG4/VOICE] Selector to [STILL].
≥The still picture that was recorded last on the Card is...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-38.png "Page 39
39
Playing Back Files from the Memory Card
It allows you to play back files recorded on a Card.
≥When you set the Palmcorder to Card Playback Mode, the Card Contents
1 are displayed to inform you which kind(s) of data (still picture, moving
picture and/or voice data) are recorded on the Card.
ªPlaying back Still Pictures
1
Set the Palmcorder to Card Playback Mode.
≥The [CARD P.B.] Lamp lights up.
2Set the [STILL/MPEG4/VOICE] Selector to [STILL].
≥The still picture that was recorded last on the Card is...")
39 Playing Back Files from the Memory Card It allows you to play back files recorded on a Card. ≥When you set the Palmcorder to Card Playback Mode, the Card Contents 1 are displayed to inform you which kind(s) of data (still picture, moving picture and/or voice data) are recorded on the Card. ªPlaying back Still Pictures 1 Set the Palmcorder to Card Playback Mode. ≥The [CARD P.B.] Lamp lights up. 2Set the [STILL/MPEG4/VOICE] Selector to [STILL]. ≥The still picture that was recorded last on the Card is...
Page 40
![Page 40
40
ªTo Select a Desired File and Play it Back
After setting the Palmcorder to the Card Playback Mode (l 39).....
1Slide the [STILL/MPEG4/VOICE] Selector to desired type of
data.
2Press the [MULTI] Button.
≥The files recorded on the Memory Card are displayed in Multi-Picture
Mode.
1
3
Rotate the [PUSH] Dial and select a desired file.
≥The selected file is marked with a red frame.
≥When 7 or more files have been recorded, rotate the [PUSH] Dial to
display the next file. The [6] Button or [5] Button can...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-39.png "Page 40
40
ªTo Select a Desired File and Play it Back
After setting the Palmcorder to the Card Playback Mode (l 39).....
1Slide the [STILL/MPEG4/VOICE] Selector to desired type of
data.
2Press the [MULTI] Button.
≥The files recorded on the Memory Card are displayed in Multi-Picture
Mode.
1
3
Rotate the [PUSH] Dial and select a desired file.
≥The selected file is marked with a red frame.
≥When 7 or more files have been recorded, rotate the [PUSH] Dial to
display the next file. The [6] Button or [5] Button can...")
40 ªTo Select a Desired File and Play it Back After setting the Palmcorder to the Card Playback Mode (l 39)..... 1Slide the [STILL/MPEG4/VOICE] Selector to desired type of data. 2Press the [MULTI] Button. ≥The files recorded on the Memory Card are displayed in Multi-Picture Mode. 1 3 Rotate the [PUSH] Dial and select a desired file. ≥The selected file is marked with a red frame. ≥When 7 or more files have been recorded, rotate the [PUSH] Dial to display the next file. The [6] Button or [5] Button can...