Panasonic Pv Vm202 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Pv Vm202 Operating Instructions Manual. The Panasonic manuals for Digital Camcorder are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
41
Slide Show
The recorded still pictures in the Card can be played back like a Slide Show.
You can set up a Slide Show or change the content.
To Select Pictures to Play Back in Your Slide Show
1After setting the [STILL/MPEG4/VOICE] Switch to [STILL],
set [CARD FUNCTIONS] >> [CARD EDITING] >>
[SLIDE SHOW] >> [YES].
≥Slide Show editing screen appears.
2Set [EDIT] >> [YES].
3Rotate the [PUSH] Dial to select a picture and then press the
dial.
4Rotate the [PUSH] Dial to select playback order and then...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-40.png "Page 41
41
Slide Show
The recorded still pictures in the Card can be played back like a Slide Show.
You can set up a Slide Show or change the content.
To Select Pictures to Play Back in Your Slide Show
1After setting the [STILL/MPEG4/VOICE] Switch to [STILL],
set [CARD FUNCTIONS] >> [CARD EDITING] >>
[SLIDE SHOW] >> [YES].
≥Slide Show editing screen appears.
2Set [EDIT] >> [YES].
3Rotate the [PUSH] Dial to select a picture and then press the
dial.
4Rotate the [PUSH] Dial to select playback order and then...")
41 Slide Show The recorded still pictures in the Card can be played back like a Slide Show. You can set up a Slide Show or change the content. To Select Pictures to Play Back in Your Slide Show 1After setting the [STILL/MPEG4/VOICE] Switch to [STILL], set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES]. ≥Slide Show editing screen appears. 2Set [EDIT] >> [YES]. 3Rotate the [PUSH] Dial to select a picture and then press the dial. 4Rotate the [PUSH] Dial to select playback order and then...
Page 42
![Page 42
42
Creating a Title
You can create a title and record on a Memory Card.
1Camera Mode:
Slide the [STILL/MPEG4/VOICE] Selector to [STILL] and
point the camera at the image you want to use for creating a
title.
VCR Mode:
Search for the image you want to use for creating a title and
set the Palmcorder to Still Playback Mode.
2Set [CARD SETUP] >> [CREATE TITLE] >> [YES].
3Press the [PHOTO SHOT] Button.≥The title is stored.
≥To perform PhotoShot again, select [RETURN].
4Press the [PUSH] Dial to select...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-41.png "Page 42
42
Creating a Title
You can create a title and record on a Memory Card.
1Camera Mode:
Slide the [STILL/MPEG4/VOICE] Selector to [STILL] and
point the camera at the image you want to use for creating a
title.
VCR Mode:
Search for the image you want to use for creating a title and
set the Palmcorder to Still Playback Mode.
2Set [CARD SETUP] >> [CREATE TITLE] >> [YES].
3Press the [PHOTO SHOT] Button.≥The title is stored.
≥To perform PhotoShot again, select [RETURN].
4Press the [PUSH] Dial to select...")
42 Creating a Title You can create a title and record on a Memory Card. 1Camera Mode: Slide the [STILL/MPEG4/VOICE] Selector to [STILL] and point the camera at the image you want to use for creating a title. VCR Mode: Search for the image you want to use for creating a title and set the Palmcorder to Still Playback Mode. 2Set [CARD SETUP] >> [CREATE TITLE] >> [YES]. 3Press the [PHOTO SHOT] Button.≥The title is stored. ≥To perform PhotoShot again, select [RETURN]. 4Press the [PUSH] Dial to select...
Page 43
![Page 43
43
Protecting the Files on a Memory Card from
Accidental Erasure
(File Lock)
Precious files recorded on a Memory Card can be locked to prevent
accidental erasure. (Even if files are locked, the files will be deleted when the
Memory Card is formatted.)
After setting the Palmcorder to the Card Playback Mode (l 39).....
1Set [CARD FUNCTIONS] >> [CARD EDITING] >> [FILE LOCK]
>> [YES].
2Rotate the [PUSH] Dial to select [PICTURE] or [TITLE], and
then press it.
≥The [FILE LOCK] Menu 1 is...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-42.png "Page 43
43
Protecting the Files on a Memory Card from
Accidental Erasure
(File Lock)
Precious files recorded on a Memory Card can be locked to prevent
accidental erasure. (Even if files are locked, the files will be deleted when the
Memory Card is formatted.)
After setting the Palmcorder to the Card Playback Mode (l 39).....
1Set [CARD FUNCTIONS] >> [CARD EDITING] >> [FILE LOCK]
>> [YES].
2Rotate the [PUSH] Dial to select [PICTURE] or [TITLE], and
then press it.
≥The [FILE LOCK] Menu 1 is...")
43 Protecting the Files on a Memory Card from Accidental Erasure (File Lock) Precious files recorded on a Memory Card can be locked to prevent accidental erasure. (Even if files are locked, the files will be deleted when the Memory Card is formatted.) After setting the Palmcorder to the Card Playback Mode (l 39)..... 1Set [CARD FUNCTIONS] >> [CARD EDITING] >> [FILE LOCK] >> [YES]. 2Rotate the [PUSH] Dial to select [PICTURE] or [TITLE], and then press it. ≥The [FILE LOCK] Menu 1 is...
Page 44
![Page 44
44
1, 2W.B./SHUTTER/IRIS/MF/VOL/JOG
PUSH1 2
1
1
NOW FORMATTING
Formatting a Memory Card
If a Memory Card becomes unreadable by the Palmcorder, formatting it may
make it reusable. Formatting will delete all the data recorded on a Memory
Card.
After setting the Palmcorder to the Card Playback Mode (l 39).....
1Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[CARD FORMAT] >> [YES].
2Select [YES] and press the [PUSH] Dial.
≥During formatting the [NOW FORMATTING] Indication 1 appears.
≥When the formatting is...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-43.png "Page 44
44
1, 2W.B./SHUTTER/IRIS/MF/VOL/JOG
PUSH1 2
1
1
NOW FORMATTING
Formatting a Memory Card
If a Memory Card becomes unreadable by the Palmcorder, formatting it may
make it reusable. Formatting will delete all the data recorded on a Memory
Card.
After setting the Palmcorder to the Card Playback Mode (l 39).....
1Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[CARD FORMAT] >> [YES].
2Select [YES] and press the [PUSH] Dial.
≥During formatting the [NOW FORMATTING] Indication 1 appears.
≥When the formatting is...")
44 1, 2W.B./SHUTTER/IRIS/MF/VOL/JOG PUSH1 2 1 1 NOW FORMATTING Formatting a Memory Card If a Memory Card becomes unreadable by the Palmcorder, formatting it may make it reusable. Formatting will delete all the data recorded on a Memory Card. After setting the Palmcorder to the Card Playback Mode (l 39)..... 1Set [CARD FUNCTIONS] >> [CARD EDITING] >> [CARD FORMAT] >> [YES]. 2Select [YES] and press the [PUSH] Dial. ≥During formatting the [NOW FORMATTING] Indication 1 appears. ≥When the formatting is...
Page 45
![Page 45
45
Copying your DV Cassette to an S-VHS or VHS
Cassette
(Dubbing)
After connecting the Palmcorder and the S-Video, Video and Audio
Input Jacks
A of the VCR as illustrated on the left, start the following
procedure.
≥Be sure to press the [OSD] Button on the Remote Controller before copying
so that no Indications are left visible. Otherwise, the displayed tape counter
and Function indications are also copied.
[Palmcorder]
1Insert the recorded Cassette.
[VCR]
2Insert a blank Cassette with an erasure...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-44.png "Page 45
45
Copying your DV Cassette to an S-VHS or VHS
Cassette
(Dubbing)
After connecting the Palmcorder and the S-Video, Video and Audio
Input Jacks
A of the VCR as illustrated on the left, start the following
procedure.
≥Be sure to press the [OSD] Button on the Remote Controller before copying
so that no Indications are left visible. Otherwise, the displayed tape counter
and Function indications are also copied.
[Palmcorder]
1Insert the recorded Cassette.
[VCR]
2Insert a blank Cassette with an erasure...")
45 Copying your DV Cassette to an S-VHS or VHS Cassette (Dubbing) After connecting the Palmcorder and the S-Video, Video and Audio Input Jacks A of the VCR as illustrated on the left, start the following procedure. ≥Be sure to press the [OSD] Button on the Remote Controller before copying so that no Indications are left visible. Otherwise, the displayed tape counter and Function indications are also copied. [Palmcorder] 1Insert the recorded Cassette. [VCR] 2Insert a blank Cassette with an erasure...
Page 46
![Page 46
46
T
W
B2
Using your Palmcorder with Digital Video
Equipment
(Dubbing)
By connecting this Palmcorder with other digital video equipment (such as
another Palmcorder of the same format/model) that has a DV input/output
terminal (i.LINK) using a 4-pin to 4-pin DV Interface cable PV-DDC9
(optional)
1, high quality image and sounds can be dubbed in the digital
mode.
[Playback Unit A]
1Insert the recorded Cassette and set the Palmcorder to the
VCR Mode.
[Recording Unit
B]
2Insert a Cassette to be...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-45.png "Page 46
46
T
W
B2
Using your Palmcorder with Digital Video
Equipment
(Dubbing)
By connecting this Palmcorder with other digital video equipment (such as
another Palmcorder of the same format/model) that has a DV input/output
terminal (i.LINK) using a 4-pin to 4-pin DV Interface cable PV-DDC9
(optional)
1, high quality image and sounds can be dubbed in the digital
mode.
[Playback Unit A]
1Insert the recorded Cassette and set the Palmcorder to the
VCR Mode.
[Recording Unit
B]
2Insert a Cassette to be...")
46 T W B2 Using your Palmcorder with Digital Video Equipment (Dubbing) By connecting this Palmcorder with other digital video equipment (such as another Palmcorder of the same format/model) that has a DV input/output terminal (i.LINK) using a 4-pin to 4-pin DV Interface cable PV-DDC9 (optional) 1, high quality image and sounds can be dubbed in the digital mode. [Playback Unit A] 1Insert the recorded Cassette and set the Palmcorder to the VCR Mode. [Recording Unit B] 2Insert a Cassette to be...
Page 47
47 Using the Software with a Computer An image stored on the DV Cassette can be transferred to your Personal Computer. ªSystem Requirements for ArcSoft ≥CD-ROM drive (for installation) (for ArcSoft Software) For Windows ® ≥IBM PC/AT or compatible ≥Intel Pentium ll Processor: 266 MHz or more ≥Windows ® XP, Windows® Me, Windows® 98, Windows® 95, Windows®2000 Professional ≥RAM: 64 MB or more ≥300 MB minimum available hard disk space ≥High color (16 bit) or more ≥CD-ROM drive (for installation) ≥Mouse or...
Page 48
![Page 48
48
1
2
3
4
ArcSoft Software
There are 4 types of image editing software in the ArcSoft
Software package.
Before you begin...
1Open [Start] >> [Programs] >> [ArcSoft] >>
[Panorama Maker 3.0] or [PhotoImpression 3.0] or
[PhotoBase 3.0] or [PhotoPrinter 2000 Pro].
1 Panorama Maker 3.0 (Windows, Mac)
≥Easy-to-use photo-stitching program seamlessly combines multiple
photos into a single panoramic picture.
2 PhotoImpression 3.0 (Windows, Mac)
≥Easy-to-use photo editing program to edit, enhance, retouch or...](http://img.usermanuals.tech/thumb/58/66133/w300_pv-vm202_en_om_d-47.png "Page 48
48
1
2
3
4
ArcSoft Software
There are 4 types of image editing software in the ArcSoft
Software package.
Before you begin...
1Open [Start] >> [Programs] >> [ArcSoft] >>
[Panorama Maker 3.0] or [PhotoImpression 3.0] or
[PhotoBase 3.0] or [PhotoPrinter 2000 Pro].
1 Panorama Maker 3.0 (Windows, Mac)
≥Easy-to-use photo-stitching program seamlessly combines multiple
photos into a single panoramic picture.
2 PhotoImpression 3.0 (Windows, Mac)
≥Easy-to-use photo editing program to edit, enhance, retouch or...")
48 1 2 3 4 ArcSoft Software There are 4 types of image editing software in the ArcSoft Software package. Before you begin... 1Open [Start] >> [Programs] >> [ArcSoft] >> [Panorama Maker 3.0] or [PhotoImpression 3.0] or [PhotoBase 3.0] or [PhotoPrinter 2000 Pro]. 1 Panorama Maker 3.0 (Windows, Mac) ≥Easy-to-use photo-stitching program seamlessly combines multiple photos into a single panoramic picture. 2 PhotoImpression 3.0 (Windows, Mac) ≥Easy-to-use photo editing program to edit, enhance, retouch or...
Page 49
49 TO PC 4) 3) 2) 1) Using the Supplied USB Connection Kit ªOperating environment USB Driver can be installed in a PC/AT compatible personal computer which can run Microsoft Windows® XP, Windows® Me, Windows® 98SE, Windows®2000 Professional. ≥USB Driver For Windows ® ≥IBM PC/AT or compatible ≥Intel Pentium ll Processor: 300 MHz or higher CPU recommended ≥Microsoft Windows® XP, Windows® Me, Windows® 98SE, Windows®2000 Professional pre-installed PC with USB port ≥Video card that supports16 bit color at...
Page 50
50 Using the G726 Decoder G726 Decoder allows you to listen to MPEG4 sound with Windows Media Player. Install it from enclosed CD-ROM. In order for the G726 Decoder to be installed, the hard disk must have at least 16 MB of free space. Before proceeding with installation, check out the amount of free space on the hard disk. For Windows ® ≥Microsoft Windows® XP, Windows® Me, Windows® 98SE, Windows®2000 Professional pre-installed PC. Also, DirectX 6,7,8 random, Direct X Media 6 or WMP 6-6.4, WMP7 must...