Panasonic Pv Dv203 Operating Instructions Manual

51
Card Features
1Set POWER to M-CARD.
“PLAY: PUSH PLAY KEY” is
displayed for 10 seconds.
2Press  (M-PLAY) to display the Multi
playback screen.
“PLEASE WAIT” appears on-screen.
Rotate JOG KEY to scroll through
Multi image screen pages (6 images
per page) and select an image.
The selected image is underlined in
green.
Press MENU to display CARD
SETUP menu screen.
Press 
 (M-STOP) to return to the
Card PhotoShot REC Mode. (p. 49)
3Press JOG KEY to display the
selected image as a full-size screen....

52For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Card Features
3M-DELM-STOP You can delete unwanted images and
increase the remaining image memory.
Warning:
Once deleted, images cannot be restored.
DELETE PAGE
Delete specific images from a page.
DELETE ALL
Delete all images. (p. 53)
FORMAT
Delete all data. (p. 54)
2M-PLAY
While deleting image, DO NOT turn off
the Palmcorder or unplug the AC
Adaptor (supplied) because this
may cause irreversible...

53
Card Features
Card Features
1Do steps 1 and 2 on page 52.
2Press  (M-DEL) to display the
DELETE menu. Then, rotate and
press JOG KEY to select ALL .
The screen below is displayed.
To cancel delete, press 
 (M-STOP)
or rotate and press JOG KEY to
select NO.
3Rotate and press JOG KEY to select
 YES .
“PLEASE WAIT” is displayed on the
screen, and then “NO PICTURE” is
displayed.
Press 
 (M-STOP) to return to the
Card PhotoShot REC Mode screen.
(p. 49)
You can delete all images from the Memory
Card...

54For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Card Features
1Do steps 1 and 2 on page 52.
2Press  (M-DEL) to display the
DELETE menu, then rotate and press
JOG KEY to select FORMAT .
The screen below is displayed.
To cancel format, press 
 (M-STOP)
or rotate and press JOG KEY to
select NO.
3Rotate and press JOG KEY to select
 YES .
“PLEASE WAIT” is displayed on the
screen as all image data is deleted
from Memory Card. Deletion is
complete...

55
Card Features
Card Features
DPOF Setting
You can select the images to be printed,
the number of prints, and other
print-related information (DPOF setting) on
a Memory Card. “DPOF” stands for Digital
Print Order Format, and since printing data
can be added to images on the Memory
Card, the Memory Card can be used with
any system that supports DPOF.
Before you begin
Set POWER to OFF before inserting a
recorded Memory Card. (pp. 49, 50)
1Do steps 1 and 2 on page 52.
2Press MENU to display the CARD
SETUP...

56For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
You can transfer images from your Palmcorder tape to your PC (Personal Computer).
Transferring Your Images (Windows)
IBM PC/AT or compatible
Pentium ll Processor: 266 MHz or more
RAM: 64 MB or more
CD-ROM drive (for installation)
Mouse or other pointing device
Windows
 98SE/Me/2000/XP preinstalled
PC with USB port
2 MB minimum available hard disk space
(for Palmcorder USB Device Driver)
15 MB...

57
PC Connection
Caution
Software Installation (Windows 98SE/Me/2000/XP)
Please install Palmcorder USB Device Driver first before connecting the Palmcorder
and your PC using USB Cable. Once Palmcorder USB Device Driver is installed, you
must restart your computer for installation to take effect.
Restarting the computer not only applies to Driver installation, but must be done
whenever “Restarting Windows”      is displayed after software or driver install/uninstall.
For Windows XP users, when...

58For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Notes on PHOTOVU/MPEG4 Movie Messenger™ System operation
For PHOTOVU/MPEG4 Movie Messenger™ System, do not connect the i.LINK and
USB terminals to the Palmcorder at the same time.
Make sure Palmcorder power is not shut off during use as your PC system may become
unstable. Therefore, the AC Adaptor should be used as the power source. (Be
especially careful when recording in M-CARD or CAMERA mode as...

59
PC Connection
Transferring Your Images (Windows)
Uninstalling Application Software
1Click “Start,” “Settings,” and
“Control Panel.”
2Double-click on “Add/Remove
Programs” in the “Control Panel.”
3Select the application software you
want to remove, and then click
[Change/Remove]*.
* If you are using Windows 98SE or Me,
click [Add/Remove].
[ This screen is an example (Windows 2000) ]
Palmcorder USB Device Driver/SD Drive, Palmcorder File Converter
(M-CARD Mode)
[ This screen is an example (Windows 2000)...

60For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
PHOTOVU/MPEG4 Movie Messenger™ System
3
2
USB TerminalUSB Terminal
1Turn on your PC.
2Set the Palmcorder POWER to VCR.
3Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
“CAPTURE” appears in the EVF or the LCD monitor.
The “Found New Hardware Wizard” screen of Windows is displayed.
Follow the instructions as they appear on your PC screen.
USB Cable (supplied)
Connection...