Panasonic Pv Dv203 Operating Instructions Manual

71
PC Connection
PHOTOVU/MPEG4 Movie Messenger™ System
Selecting a Frame from a
Motion Image
1Repeat steps 1~4 on page 62 to
run the PHOTOVU/MPEG4 Movie
Messenger™ System.
2Click [VideoGift] to display the
VideoGift screen.
The image captured last is displayed
in the VideoGift screen.
If “Unable To Locate DLL” warning
indication is displayed, please see
page 89.
3Click [View Manager] to display the
View Manager screen.
4Click on [Movie] to display a Motion
image list on the View Manager
screen.
5Click...

72For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Transferring Your Images (i.LINK) (Windows)
DV Interface Cable (i.LINK)
(6-to-4 pin) (not supplied)
PC Connector
DV Input/Output
(i.LINK)
Connector
PC Connection with DV Interface Cable (i.LINK)
Our DVC being OHCI compliant should have no problem working
with any OHCI compliant Firewire Card/video - Editing software
package.
A video clip can be transferred directly to your PC (Personal Computer) via...

73
PC Connection
Using Tape Image DataBefore you begin
Insert a recorded Tape. (p. 12)
Make Palmcorder-PC connections.
(p. 72)
Turn your PC on.
Set Palmcorder POWER to VCR.
Run the Software after the DV
Interface Cable (i.LINK) has been
connected to the Palmcorder.
1Repeat steps 1~4 on page 62 to
run the PHOTOVU/MPEG4 Movie
Messenger™ System.
When the DV Interface Cable (i.LINK)
is connected, the input display will
automatically become DV. If it is not
DV, please confirm the connection.
Then, close...

74For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
3Click on [Detail].
4Click on [Movie Capture] at the
point where you wish to capture a
Motion image.
The screen to select the start frame is
displayed.
5Select the start frame for the
segment to be captured select one
frame, and click [Select].
“Now Searching...” is displayed, and
the DV tape is rewound to the point
at which the capture was started.
“Now capturing a movie.” is
displayed.
6Click on...

75
PC Connection
Palmcorder USB Device Driver/SD Drive
3
2
USB TerminalUSB Terminal
1Turn on your PC.
2Set the Palmcorder POWER to M-CARD.
3Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
“CONNECT WITH PC” and “STORAGE” appears in the EVF or the LCD monitor.
The “Found New Hardware Wizard” screen of Windows is displayed.
Follow the instructions as they appear on your PC screen.
USB Cable (supplied)
For Windows XP users
Connection (for Palmcorder USB Device Driver/SD Drive)...

76For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
For Windows 98SE/Me/2000 users
3Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
“CONNECT WITH PC” and “STORAGE” appears in the EVF or the LCD monitor.
The “Found New Hardware” screen of Windows is displayed.
Palmcorder USB Device Driver/SD Drive
Note
For extended use, the AC Adaptor should be used as a power source.
Some OS, such as Windows 98SE, may
not show the icon...

77
PC Connection
Palmcorder USB Device Driver/SD Drive
Using Memory Card Image
DataBefore you begin
Install the Palmcorder USB Device
Driver. (p. 57)
Set POWER to OFF before inserting a
recorded Memory Card. (pp. 49, 50)
Make Palmcorder-PC connections.
(pp. 75, 76)
Turn your PC on. (p. 75)
Set POWER to M-CARD. By connecting the Palmcorder and PC with
the USB, you can transfer Still images
saved on the Memory Card directly to your
PC.
For Windows 98SE/Me/2000
users
1Connect the Palmcorder to your PC...

78For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Palmcorder File Converter
Using Palmcorder File
Converter
You can convert the JPEG data of your PC
into DCF (Design rule for Camera File
System) data, and transfer this data to your
Palmcorder via USB.
1Set Palmcorder POWER to M-CARD.
2Connect the Palmcorder to your PC
using the USB Cable (supplied).
(pp. 75, 76)
3Click on “Start,” “(All) Programs,”
“Panasonic,” “Palmcorder,” then
“File Converter...

79
PC Connection
Palmcorder File Converter
6Select the folder to which the
converted file is to be saved.
The Conversion results screen is
displayed.
7Use “Help” for detailed instructions.
When selecting “To convert
format for Panasonic Digital
Palmcorder”
5Select the file to be converted.
6Select the drive to which the
converted file is to be saved.
The Conversion results screen is
displayed.
7Use “Help” for detailed instructions.
DV203.p 78-79.p6503/01/20, 14:57 79 

80For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Web Camera
Please read this first
Conditions for Use
You have direct dial-up connection access to the Internet.
You and the other person(s) are in the same Network (LAN).
Microsoft MSN Messenger Service 4.5 or later/Windows NetMeeting 3.01 or later is
installed.
For Windows XP users, Windows Messenger 4.5 or later is installed.
It is convenient if the person you want to access is already a...