Panasonic Pv Dv203 Operating Instructions Manual

							51
Card Features
1Set POWER to M-CARD.
“PLAY: PUSH PLAY KEY” is
displayed for 10 seconds.
2Press  (M-PLAY) to display the Multi
playback screen.
“PLEASE WAIT” appears on-screen.
Rotate JOG KEY to scroll through
Multi image screen pages (6 images
per page) and select an image.
The selected image is underlined in
green.
Press MENU to display CARD
SETUP menu screen.
Press 
 (M-STOP) to return to the
Card PhotoShot REC Mode. (p. 49)
3Press JOG KEY to display the
selected image as a full-size screen.
“PLEASE WAIT” appears on-screen.
4Rotate JOG KEY to select BACK
(previous image), MULTI (Multi Image
screen), or NEXT (next image).
Press 
 (M-STOP) to return to the
Multi Playback screen.
Note
If the file number is changed, the
Palmcorder cannot read the file data.
This product is compliant with DCF
(Design rule for Camera File System).
Images saved on the Memory Card
using other Digital Still Cameras that are
compliant with DCF can be viewed on
this product.
While “PLEASE WAIT” is displayed, DO
NOT turn off the Palmcorder or unplug
the AC Adaptor (supplied) because this
may cause irreversible damage to the
Memory Card.
2M-PLAY
M-STOP
Warning
You can view the images on the Memory
Card.
Before you begin
Set POWER to OFF before inserting a
recorded Memory Card. (pp. 49, 50)Playback Still Images
“PLEASE WAIT” is displayed.
1POWER
3, 4
JOG KEY
Card Features
Note
The input to the Video Monitor and LCD
Panel will not be displayed on the picture
recorded of the Memory Card.
DV203.p 49-52.p6503/01/20, 14:56 51 
						

							52For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Card Features
3M-DELM-STOP You can delete unwanted images and
increase the remaining image memory.
Warning:
Once deleted, images cannot be restored.
DELETE PAGE
Delete specific images from a page.
DELETE ALL
Delete all images. (p. 53)
FORMAT
Delete all data. (p. 54)
2M-PLAY
While deleting image, DO NOT turn off
the Palmcorder or unplug the AC
Adaptor (supplied) because this
may cause irreversible damage to the
Memory Card, resulting in reduced image
storage capacity.
Before you begin
Set POWER to OFF before inserting a
recorded Memory Card. (pp. 49, 50)
1Set POWER to M-CARD.
“PLAY: PUSH PLAY KEY” is
displayed for 10 seconds.
2Press  (M-PLAY) to display the Multi
playback screen.
“PLEASE WAIT” appears on-screen.
3Press  (M-DEL) to display the
DELETE menu, then rotate and press
JOG KEY to select PAGE .
DELETE PAGE menu is displayed.
4Rotate and press JOG KEY to select
and set the image to be deleted.
The selected image is underlined in
pink.
5Rotate JOG KEY to select YES , and
press JOG KEY to delete the selected
image.
To cancel delete, press 
 (M-STOP)
or rotate and press JOG KEY to
select NO.
“PLEASE WAIT” appears on-screen
during deletion.
To delete other images, repeat
steps 4~5.
Delete Specific Images
Warning
1POWER
3, 4, 5
JOG KEY
DV203.p 49-52.p6503/01/20, 14:56 52 
						

							53
Card Features
Card Features
1Do steps 1 and 2 on page 52.
2Press  (M-DEL) to display the
DELETE menu. Then, rotate and
press JOG KEY to select ALL .
The screen below is displayed.
To cancel delete, press 
 (M-STOP)
or rotate and press JOG KEY to
select NO.
3Rotate and press JOG KEY to select
 YES .
“PLEASE WAIT” is displayed on the
screen, and then “NO PICTURE” is
displayed.
Press 
 (M-STOP) to return to the
Card PhotoShot REC Mode screen.
(p. 49)
You can delete all images from the Memory
Card easily with this operation.
Warning:
Once deleted, images cannot be restored.
2M-DELM-STOP
While deleting images, DO NOT turn off
the Digital Video Camcorder or unplug
the AC Adaptor (supplied) because this
may cause irreversible damage to the
Memory Card, resulting in reduced image
storage capacity.
Before you begin
Set POWER to OFF before inserting a
recorded Memory Card. (pp. 49, 50)
Delete All Image Pages
2, 3
JOG KEY
Warning
DV203.p 53-55.p6503/01/20, 14:56 53 
						

							54For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Card Features
1Do steps 1 and 2 on page 52.
2Press  (M-DEL) to display the
DELETE menu, then rotate and press
JOG KEY to select FORMAT .
The screen below is displayed.
To cancel format, press 
 (M-STOP)
or rotate and press JOG KEY to
select NO.
3Rotate and press JOG KEY to select
 YES .
“PLEASE WAIT” is displayed on the
screen as all image data is deleted
from Memory Card. Deletion is
complete when “NO PICTURE” is
displayed.
Press 
 (M-STOP) to return to the
Card PhotoShot REC Mode screen.
(p. 49).
You can easily format your Memory Card
using this operation.
Warning:
Formatting permanently removes all image
data.
While deleting image, DO NOT turn off
the Palmcorder or unplug the AC
Adaptor (supplied) because this
may cause irreversible damage to the
Memory Card, resulting in reduced image
storage capacity.
Before you begin
Set POWER to OFF before inserting a
recorded Memory Card. (pp. 49, 50)
Format the Memory Card
Warning
2M-DELM-STOP
2, 3JOG KEY
DV203.p 53-55.p6503/01/20, 14:56 54 
						

							55
Card Features
Card Features
DPOF Setting
You can select the images to be printed,
the number of prints, and other
print-related information (DPOF setting) on
a Memory Card. “DPOF” stands for Digital
Print Order Format, and since printing data
can be added to images on the Memory
Card, the Memory Card can be used with
any system that supports DPOF.
Before you begin
Set POWER to OFF before inserting a
recorded Memory Card. (pp. 49, 50)
1Do steps 1 and 2 on page 52.
2Press MENU to display the CARD
SETUP menu screen.
3Rotate JOG KEY to select DPOF , then
press JOG KEY to select ON.
4Rotate JOG KEY to select VARIABLE ,
then press JOG KEY to select ON.
DPOF SETTING menu screen is
displayed on the screen.
5Rotate and press JOG KEY to select
the picture.
The selected image is underlined in
green.
The cursor moves to “D-000”.
6Rotate and press JOG KEY to set the
number of prints.
The “
” mark is displayed.
The “
” mark indicates pictures for
which 1 or more prints have been set.
When printing one each of all the
pictures, select “ALL1”; if not all the
pictures are printed, select “ALL0”.
7Repeat steps 5 and 6 to set the other
pictures.
VARIABLE:
You can select images recorded on the
Memory Card and set the number of prints
desired.
ALL1:
The number of prints recorded on the
Memory Card is collectively set to 1.
ALL0:
The currently set number of prints is set
to 0.
Print mark is based on DPOF (Digital Print Order Format).
3, 4, 5, 6JOG KEY
2MENU
DV203.p 53-55.p6503/01/20, 14:56 55 
						

							56For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
You can transfer images from your Palmcorder tape to your PC (Personal Computer).
Transferring Your Images (Windows)
IBM PC/AT or compatible
Pentium ll Processor: 266 MHz or more
RAM: 64 MB or more
CD-ROM drive (for installation)
Mouse or other pointing device
Windows
 98SE/Me/2000/XP preinstalled
PC with USB port
2 MB minimum available hard disk space
(for Palmcorder USB Device Driver)
15 MB minimum available hard disk
space (for PHOTOVU/MPEG4 Movie
Messenger™ System)
10 MB minimum available hard disk
space (for Palmcorder File Converter)
Minimum 120 MB of free hard disk space
for Motion picture transfer from DV tape to
PC (for PHOTOVU/MPEG4 Movie
Messenger™ System)Video card that supports 16 bit color at
800 x 600 monitor resolution (for
Palmcorder USB Device Driver,
PHOTOVU/MPEG4 Movie Messenger™
System, and Palmcorder File Converter)
Microsoft® Windows Media™ Player 6.4
(for Windows 2000 users: Microsoft®
Windows Media™ Player 7.1) or later
(for PHOTOVU/MPEG4 Movie
Messenger™ System)
* If Windows Media Player 6.4 (for
Windows 2000 users: Windows Media
Player 7.1) or later is not installed in
your PC, please download and install
Windows Media Player from the
Microsoft Home Page:
http://www.microsoft.com/
System Requirements (for Palmcorder USB Device Driver/PHOTOVU
MPEG4 Movie Messenger™ System)
Palmcorder USB Device Driver/Web Camera/SD Drive
Install Palmcorder USB Device Driver.
You can transfer motion/still picture to your PC using Movie Messenger, Web Camera or
SD Drive via USB. Using this driver allows data communication between the Memory Card
and PC.
PHOTOVU/MPEG4 Movie Messenger™ System
Install PHOTOVU/MPEG4 Movie Messenger™ System.
You can transfer motion/still pictures to your PC from a Mini DV Tape via USB and i.LINK.
Palmcorder File Converter
Install File Converter.
You can convert the JPEG data of your PC into the DCF (Design rule for Camera File
System) data, and transfer this data to your Palmcorder via USB. Using this driver allows
data communication between the Memory Card and PC. *Satisfy the conditions recommended by Microsoft for Windows XP.
DV203.p 56-61.p6503/01/20, 14:56 56 
						

							57
PC Connection
Caution
Software Installation (Windows 98SE/Me/2000/XP)
Please install Palmcorder USB Device Driver first before connecting the Palmcorder
and your PC using USB Cable. Once Palmcorder USB Device Driver is installed, you
must restart your computer for installation to take effect.
Restarting the computer not only applies to Driver installation, but must be done
whenever “Restarting Windows”      is displayed after software or driver install/uninstall.
For Windows XP users, when installing Palmcorder USB Device Driver, a message, such
as the one below, is displayed. The following message      is displayed. However,
testing by the manufacturer has confirmed functionality of this Palmcorder with
Windows XP. Click [Continued Anyway] and proceed.
1Turn on the PC (Personal Computer) and start up Windows.
2Insert the supplied Software CD-ROM into the CD-ROM drive.
3Click the icon you want to install. Please install the Palmcorder USB Device Driver
first and follow the instructions listed under “Caution”.
4Follow the instructions as they appear on your PC screen.Palmcorder USB Device Driver
For Movie Messenger
For Web Camera
For SD Drive : Click
PHOTOVU/MPEG4 Movie
Messenger™ System : Click
Palmcorder File Converter : Click
If a window does not appear automatically, click the “Start” button on your desktop and
then click “Run”. When the Run box is open, type in “D:\InstMenu.exe” where “D:” is the
drive letter of your CD; then click “OK”.
If you attempt to install the next Software before the previous Software installation is
completed, “Error” may appear. In this case, click [OK] and install the next Software from
the menu.
Note
Transferring Your Images (Windows)
a
b
a
b
DV203.p 56-61.p6503/01/20, 14:56 57 
						

							58For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Notes on PHOTOVU/MPEG4 Movie Messenger™ System operation
For PHOTOVU/MPEG4 Movie Messenger™ System, do not connect the i.LINK and
USB terminals to the Palmcorder at the same time.
Make sure Palmcorder power is not shut off during use as your PC system may become
unstable. Therefore, the AC Adaptor should be used as the power source. (Be
especially careful when recording in M-CARD or CAMERA mode as the power
eventually shuts off automatically if a tape is inserted.)
For PHOTOVU/MPEG4 Movie Messenger™ System, if the play, stop, fast forward,
and rewind functions are operated using the Palmcorder buttons, the image may not be
captured properly. Use Palmcorder Operation Buttons displayed on the PC screen.
Transferring Your Images (Windows)
Verifying the driver (Windows 98SE/Me/2000/XP)
Note
Verify the driver while Palmcorder is connected to the computer.
Palmcorder USB Device Driver/Web Camera (CAMERA Mode)
[ This screen is an example (Windows 2000) ]
1Click “Start,” “Settings,” and
“Control Panel.”
2Double-click on “System”, verify
[Panasonic USB Video Camera] is
displayed in [Imaging Devices] of
[Device Manager] of [Hardware].
PHOTOVU/MPEG4 Movie Messenger™ System (VCR Mode)
[ This screen is an example (Windows 2000) ]
1Click “Start,” “Settings,” and
“Control Panel.”
2Double-click on “System”, verify
[Panasonic Digital Palmcorder] is
displayed in [Universal Serial Bus
controllers] of [Device Manager] of
[Hardware].
DV203.p 56-61.p6503/01/20, 14:56 58 
						

							59
PC Connection
Transferring Your Images (Windows)
Uninstalling Application Software
1Click “Start,” “Settings,” and
“Control Panel.”
2Double-click on “Add/Remove
Programs” in the “Control Panel.”
3Select the application software you
want to remove, and then click
[Change/Remove]*.
* If you are using Windows 98SE or Me,
click [Add/Remove].
[ This screen is an example (Windows 2000) ]
Palmcorder USB Device Driver/SD Drive, Palmcorder File Converter
(M-CARD Mode)
[ This screen is an example (Windows 2000) ]
1Click “Start,” “Settings,” and
“Control Panel.”
2Double-click on “System”, verify
[USB Storage Device Controller]* is
displayed in [Universal Serial Bus
controllers] of [Device Manager] of
[Hardware].
* If you are using Windows 98SE,
[MATSUSHITA USB Storage Device
Controller] will be displayed.
DV203.p 56-61.p6503/01/20, 14:56 59 
						

							60For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
PHOTOVU/MPEG4 Movie Messenger™ System
3
2
USB TerminalUSB Terminal
1Turn on your PC.
2Set the Palmcorder POWER to VCR.
3Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
“CAPTURE” appears in the EVF or the LCD monitor.
The “Found New Hardware Wizard” screen of Windows is displayed.
Follow the instructions as they appear on your PC screen.
USB Cable (supplied)
Connection (for PHOTOVU/MPEG4 Movie Messenger™ System)
For Windows XP users
Note
For extended use, the AC Adaptor should be used as a power source.
DV203.p 56-61.p6503/01/20, 14:56 60