Panasonic Projector PT-AE7000U User Manual

[PICTURE] menu
ENGLISH - 41
Settings
[COLOR TEMPERATURE]
You can adjust the color temperature if the white 
areas of the projected image are bluish or reddish.Less bluish
Less reddish
Setting range: -6 to +6
 
z
[SHARPNESS]
With regards to the input signal, adjust video 
sharpness using one of [SIMPLE] which adjusts 
horizontal direction and vertical direction 
simultaneously or [ADVANCED] which adjusts each 
individually.
Softer
Sharper
Note
Setting range will vary according to the selected input 
 
z...

[PICTURE] menu
42 - ENGLISH
Settings
 
■ [MONITOR POSITION]
You can set the display position of the input waveform 
during the FULL SCAN display.
Switch settingsSwitch settings
[
 
■ AUTO ADJUST]
The luminance level of the output signal from a connected 
external device is automatically adjusted by setting the 
automatic waveform adjustment items.
Press the  button.
1)  
Press the ▲▼ buttons to select the 
2)  
required item.
Automatic waveform 
adjustment items Default 
setting
[BLACK LEVEL ADJUST]...

[PICTURE] menu
ENGLISH - 43
Settings
Adjust [FULL SCAN(Y)] / [SINGLE LINE 
1)  
SCAN(Y)].
Set on [PICTURE] and use the 
 
z▲
▼ buttons to 
adjust [BRIGHTNESS] and then [CONTRAST].
[BRIGHTNESS]
Adjust the bottom line of the 
waveform to 0 %  
(0 or 7.5 IRE)
Setting range:  
 
z
−32 to +32
[CONTRAST]
Adjust the top line of the 
waveform to 100 %  
(100 IRE)
Setting range:  
 
z
−64 to +64
Adjust [FULL SCAN(R)] / [SINGLE LINE 
2)  
SCAN(R)].
Set on [ADVANCED MENU] and use the 
 
z▲
▼ 
buttons to adjust...

[PICTURE] menu
44 - ENGLISH
Settings
[SPLIT ADJUST]
You can perform image adjustment for some 
[PICTURE] menu items while displaying a certain 
area of the frozen image in a split window.
Press the  button.
1)  
The [SPLIT ADJUST] menu is displayed.
 
z
SPLIT  ADJUST
AREA  SELECT
SPLIT  ADJUST  MODE
NORMAL
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL OPTION
Press the ▲▼ buttons to select [AREA 
2)  
SELECT] and then press the  
button.
The image is frozen and an area for adjustment is 
 
z...

[PICTURE] menu
ENGLISH - 45
Settings
Note
You cannot adjust menu items that are displayed in grey 
 
z
during split adjustment.
The [KEYSTONE] of [POSITION] becomes inactive 
 
z
during split adjustment.
When a 3D signal is being input (including converting 2D 
 
z
to 3D), the [SPLIT ADJUST] cannot be executed.
[ADVANCED MENU]
You can perform more detailed image adjustment 
manually.
Press the  button
The [ADVANCED MENU] menu is displayed.
 
z
 
■ [GAMMA ADJUSTMENT]
You can make detailed adjustments to...

[PICTURE] menu
46 - ENGLISH
Settings
Adjust the tone with the ▲▼
3)  ▲
▼ buttons, 
 button,  button, or 
 button.
a.  Changing the selected point
Using the remote control
 
z
The selection point moves one point to the right each 
time the  button is pressed. The default 
setting is point 5. 
Ex. 5 -> 6 ->...-> 9 -> 1 ->...
Y  ADJUST
POINT
0% 50%100%
INPUT
OUTPUT
INPUTOUTPUT50%+ 10
5
Y  ADJUST
POINT
0% 50%100%
INPUT
OUTPUT
INPUTOUTPUT60%0
6
Using the device control
 
z
You can also change the [POINT] from...

[PICTURE] menu
ENGLISH - 47
Settings
c. Adjusting the output level
To adjust the output level from the present setting, 
 
z
press ▲ ▼ continuously until it reaches to your 
desired level. (It may be moved up and down.)
Output level can be adjusted for each color on 
 
z
the [R/G/B ADJUST] screen.
Ex.   Press ▲ in the [Y ADJUST] screen and move the 
selected point upward.
Y ADJUST
POINT
0% 50%100%
INPUT
OUTPUT
INPUTOUTPUT50%+ 10
5
Setting range: -252 to +252
Y  ADJUST
POINT
0% 50%100%
INPUT
OUTPUT...

[PICTURE] menu
48 - ENGLISH
Settings
Initialize the gamma adjustment results
 
●
GAMMA  ADJUSTMENT
ADJUSTMENT  MODE
GAMMA  HIGH
GAMMA  MID
GAMMA  LOW
POINT
Y  ADJUST
R  ADJUST
G  ADJUST
B  ADJUST
INITIALIZE ADVA
NCED
5
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL OPTION
Press the ▲▼ buttons to select 
1)  
[INITIALIZE] and press the  
button.
The confirmation message is displayed for the 
 
z
gamma initialization.
GAMMA  ADJUSTMENT
INITIALIZE GAMMA  ADJUSTMENT.
CANCELOK
Select [OK] with the 
2)  ▲...

[PICTURE] menu
ENGLISH - 49
Settings
 
■ [MPEG NR]
You can eliminate the noise that occurs upon projection for 
videos that use MPEG compression.
WeakenStrengthen
Setting range: 0 to +3
 
z
Attention
Use a strong setting when projecting an MPEG video.
 
z
COMPUTER (RGB) signal is not supported.
 
z
 
■ [FRAME CREATION]
You can activate the rendering system for fast motion 
frames with fewer afterimage.
Switch settingsSwitch settings
[OFF][MODE1]
[MODE3][MODE2]
[OFF] 
Deactivate
[MODE1] Setting for a...

[PICTURE] menu
50 - ENGLISH
Settings
Press the  button.
4)  
[CURSOR] menu 
 
z (B)
 and the color selected  (C) 
are displayed.
 
COLOR
TINT
BRIGHTNESS
CURSOR0
0
0
RETURN
DEF
AULT
SELECT ENTER
Screen
Note
In some cases you may be unable to adjust when the 
 
z
very edge point of the projection area is selected.
You can create a profile only when [ADJUSTMENT 
 
z
MODE] is set to either [CURSOR] or [RGBCMY]. A profile 
cannot be created from both adjustments. 
White, gray and black cannot be edited.
 
z...