Panasonic Projector PT-AE7000U User Manual

[3D SETTINGS] menu
ENGLISH - 61
Settings
[3D SETTINGS] menu
Either press the  button on the remote 
control or select [3D SETTINGS] from the 
main menu in “Navigating through the menu” 
(
 page 37) and select the item from a 
submenu.
After selecting an item, adjust the screen position 
 
z
using the ▲▼◄ ► buttons.
Remote contro lProjector controls
[SCREEN SIZE]
When viewing 3D video, set the screen size for 
projection.
[102 cm (40 inches)][152 cm (60 inches)]
[508 cm (200 inches)]
[203 cm (80...

[3D SETTINGS] menu
62 - ENGLISH
Settings
Note
If a setting other than [AUTO] is selected when the input is switched to HDMI, [3D INPUT FORMAT] is changed to [AUTO] 
 
z
when actions such as turning the power of/on, switching input, or switching the signal are performed on the connected 
device. 
See the following table regarding settings, input signals and the image for viewing.
Switching 3D  format
Input signal [AUTO]
[SIDE BY SIDE] [TOP AND  
BOTTOM] [NATIVE]
FRAME  
PACKING
(Normal 3D video)
SIDE BY...

[3D SETTINGS] menu
ENGLISH - 63
Settings
[LEFT/RIGHT SWAP]
Switch to [REVERSE] if you feel discomfort when 
watching a 3D video with 3D Eyewear.
Switch settingsSwitch settings
[NORMAL][SWAPPED]
[NORMAL]If the 3D video is being displayed 
correctly while the 3D Eyewear is 
being worn, do not change from 
[NORMAL] settings.
[SWAPPED]
Select this if a feeling of discomfort is 
felt towards the 3D video while wearing 
3D Eyewear.
Note
If 3D video is being correctly displayed in 3D, setting 
 
z
[LEFT/RIGHT...

[3D SETTINGS] menu
64 - ENGLISH
Settings
[
 
■ 3D WAVEFORM MONITOR]
For easy balance adjustment, use a video device that 
supports 3D and displays the video output (brightness) 
level of the 3D video for the left and right eye respectively.
Press the  button.
1)  
The [3D WAVEFORM MONITOR] menu is 
 
z
displayed.
3D W AVEFORM MONIT OR
   OFF
   SINGLE LINE SCAN(Y)
   SINGLE LINE SCAN(R)
   SINGLE LINE SCAN(G)
   SINGLE LINE SCAN(B)
MOVE LINE
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL OPTION
Press...

[3D SETTINGS] menu
ENGLISH - 65
Settings
Press the ▲▼◄► buttons to specify the 
5)  
location of the required character to enter 
and press the  button.
You can enter up to 16 characters.
 
z
Select [ALL DELETE] and press the  
 
z
button to erase all input text. If you press the 
 button on the remote control, you 
can erase the character currently selected by 
the cursor in the input box.
Press the ▲▼◄► buttons to select [OK].
6)  
Press the  button.
7)  
Note
Press the  button without entering any...

[3D SETTINGS] menu
66 - ENGLISH
Settings
[PICTURE BALANCE MEMORY NAME 
 
●
CHANGE]
You can edit the memory name of details saved using 
[PICTURE BALANCE MEMORY SAVE].
Press the ▲▼ buttons to select [MEMORY 
1)  
NAME CHANGE] and press the  
button.
The [PICTURE BALANCE MEMORY NAME 
 
z
CHANGE] menu is displayed.
PICTURE BALANCE MEMORY  NAME CHANGE
MEMORY 1
MEMORY 2
MEMORY 3
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL OPTION
Press the ▲▼ buttons to select the 
2)  
memory name to be changed and...

[3D SETTINGS] menu
ENGLISH - 67
Settings
[3D EYEWEAR BRIGHTNESS]
This enables adjusting the brightness for the 3D 
Eyewear.
Switch settingsSwitch settings
[LIGHT][DARK]
 
 
[NORMAL]
[LIGHT] Select to brighten the 3D video display.
[NORMAL] Select this as standard for 3D viewing
[DARK] Select to reduce 3D video afterimage.
Note
When you switch the brightness of 3D Eyewear, the 
 
z
screen may momentarily appear jumbled.
[3D IR TRANSMITTER]
This controls the 3D IR Transmitter embedded in this 
projector....

[3D SETTINGS] menu
68 - ENGLISH
Settings
[3D VIEWING MONITOR]
In the 3D video the depth of field effects in front of and 
into the screen are adjusted while confirming on the 
monitor display.
The respective lines show the following details.
White (dashed line)Default display for video without 
parallax
Orange (solid line) Displays the parallax within the 
screen
White (solid line) Displays an estimate for parallax 
of general 3D video
Yellow (dashed line) Displays the maximum 
estimate for 3D video...

[LENS CONTROL] menu
ENGLISH - 69
Settings
Select [LENS CONTROL] from the main menu 
of “Navigating through the menu” (
 page 37), 
and choose an item from the submenu.
After selecting an item, adjust the screen position 
 
z
using the ▲▼◄ ► buttons.
Remote contro lProjector controls
Note
When 3D is being displayed (including converting 2D to 
 
z
3D), the [LENS CONTROL] cannot be executed. Perform 
the operation after switching to 2D.
[ZOOM/FOCUS]
[ZOOM/FOCUS] test pattern 1 is displayed. 
Adjust so...

[LENS CONTROL] menu
70 - ENGLISH
Settings
[LENS MEMORY SAVE]
This enables saving zoom and focus adjustment 
position, horizontal video position, vertical video 
position, adjustment for amount of mask, and aspect 
settings.
LENS MEMORY SAVE
 
­LENS MEMORY 1
 
¬LENS MEMORY 2
 
­LENS MEMORY 3
 
­LENS MEMORY 4
 
­LENS MEMORY 5
 
­LENS MEMORY 6
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL OPTION
Ò: Memory with data already stored
Ñ : No data stored
Press the ▲▼ buttons to select the 
1)  
memory to...