Panasonic Projector PT-AE7000U User Manual

[PICTURE] menu
ENGLISH - 51
Settings
Press the ▲▼ buttons to select a menu 
4)  
item and the ◄► buttons to adjust each 
item level.
[COLOR] Adjust the vividness of the 
color.Setting range:  
 
z
−30 to +30
[TINT] Adjust the color tone.Setting range:  
 
z
−30 to +30
[BRIGHTNESS]
Adjust the brightness of the 
color.
Setting range:  
 
z
−20 to +20
The default setting for each item is [0]. 
 
z
 After adjusting, the post-adjustment color  (D) is 
displayed.
COLOR
TINT
BRIGHTNESS
RED0
0
0
RETURN
DEF
AULT...

[PICTURE] menu
52 - ENGLISH
Settings
Managing the stored logs created through the 
 
z
[RGBCMY] mode
 
 LOG
 ADJUSTMENT  MODE
 PICTURE MODE
 RED
 GREEN
 BLUE
 CY AN
 MAGENTA
  YELLOW
  ALL  DELETE  
: RGBCMY
: NORMAL
COLOR      TINT   BRIGHTNESS
+10+ 10+10
+10+ 10+10
+10+ 10+10
+10+ 10+10
+10+ 10+10
+10+ 10+10
Adjusted 
color
Selected 
color
[RED] 
[GREEN]  [BLUE] 
[CYAN] 
[MAGENTA]  [YELLOW]
Press ▲ ▼ to select the color you 
wish to edit, and press the  
button to display the screen to select 
[CHANGE]...

[PICTURE] menu
ENGLISH - 53
Settings
Deleting a profile
 
●
Press the ▲▼ buttons to select [PROFILE 
1)  
DELETE] and press the  button.
The [PROFILE DELETE] menu is displayed.
 
z
PROFILE DELETE
USER1
USER2
USER3
ALL  DELETE
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL OPTION
Press the ▲▼ buttons to select the profile 
2)  
to be deleted and press the  
button.
Select [ALL DELETE] to delete all profiles.
 
z
The [PROFILE DELETE] confirmation message 
 
z
is displayed.
 PROFILE DELETE
DELETE THE...

[PICTURE] menu
54 - ENGLISH
Settings
Loading saved profiles
 
●
Select a saved profile (color adjustment result). The 
adjustment values set in the profile are applied to the 
[PICTURE MODE] menu and recorded.
Press the ▲▼ buttons to select [PROFILE].
1)  
Use the 
2)  
▲
▼ buttons to switch the profile.
[NORMAL][USER1]
[USER3][USER2]
[NORMAL]Default setting.
[USER] 
[1] to [3] Displayed when profile is saved.
[
 
■ x.v.Color]
You can switch on/off the automatic adjustment system for 
signals which...

[PICTURE] menu
ENGLISH - 55
Settings
 
■ [RGB/YCBCR], [RGB/YPBPR]
Set this to [AUTO] under normal conditions. If images are 
not displayed correctly when this is set to [AUTO], set 
either [RGB] or [YC
BCR], [YPBPR] in accordance with the 
input signal.
Switch settingsSwitch settings
The settings change as follows each time the button
is pressed.
[AUTO][RGB]
[YPBPR][YCBCR]
When using COMPUTER input
 
●
When using 480i, 480p, 576i, 576p, or VGA60 input:
 
z
Select from [AUTO], [RGB], [YCBCR].
When using a...

[PICTURE] menu
56 - ENGLISH
Settings
Press the ▲▼◄► buttons to select [OK].
5)  
Press the  button.
6)  
Note
Press the  button without entering any text to 
 
z
keep the default name ([MEMORY1-16]).
 
■ [MEMORY LOAD]
You can access the details saved through [MEMORY 
SAVE].
MEMORY 
LOAD
MEMORY 1
MEMORY 2
MEMORY 3
MEMORY 4
MEMORY 5
MEMORY 6
MEMORY 7
MEMORY 8
MEMORY 9
MEMORY 10
MEMORY 11
MEMORY 12
MEMORY 13
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL OPTION1/2
Press the ▲▼ buttons to select the 
1)...

[POSITION] menu
ENGLISH - 57
Settings
[POSITION] menu
Select [POSITION] from the main menu in 
“Navigating through the menu” (
 page 37) and 
choose an item from the submenu.
After selecting an item, use the 
 
z▲
▼ to adjust the 
screen position.
Remote contro lProjector controls
[H-POSITION]
If the position of the picture projected on the screen 
deviates when the relative position of the projector 
and the screen is correctly set, move the picture 
position horizontally.
Moving left
Moving right...

[POSITION] menu
58 - ENGLISH
Settings
[ASPECT]
You can switch the image aspect ratio manually when 
needed. 
Aspect ratio depends on signals.
Switch settingsSwitch settings
When a VIDEO/S-VIDEO signal is input
 
■
[NTSC/NTSC4.43/PAL-M/PAL60 input]
[AUTO][4:3][16:9]
[ZOOM][JUST][S16:9]
Note
[AUTO] is enabled only when an NTSC signal is input for 
 
z
both VIDEO and S-VIDEO signals. 
[PAL/PAL-N/SECAM input]
[16:9][S16:9][14:9][ZOOM1]
      
[4:3][JUST][ZOOM2]
When a COMPUTER (RGB) signal is 
 
■
input...

[POSITION] menu
ENGLISH - 59
Settings
AspectScreen
[4:3]
Projects at 4:3. Input signal
  
Projection screen
[16:9]
Projects at 16:9.  
(Enlarged horizontally) Input signal  
Projection screen
[S16:9]
Projects a 16:9 aspect 
video onto a 4:3 aspect 
screen. Input signal
  
Projection screen
[JUST]
Adjusts horizontally to 
fit 16:9. 
When projecting 
a 4:3 aspect ratio 
video, distortion in the 
center of the screen is 
reduced.
 
(Enlarged horizontally) Input signal
  
Projection screen
Aspect Screen...

[POSITION] menu
60 - ENGLISH
Settings
[WSS]
In the European broadcasting system, if the input 
signal contains an identification signal, WSS 
automatically switches the aspect ratio to the required 
setting. (
 page 58)
Switch settingsSwitch settings
[ON]Switch automatically
[OFF] Do not switch automatically
Note
Aspect ratio switches only in the case of these input 
 
z
signals: PAL/625i (576i)/625p (576p)
[OVER SCAN]
If the 4 edges of an image are partly dropped, you can 
use this function to adjust...