Home
>
Panasonic
>
Security system
>
Panasonic PC Software Package Wv Asm200 Series Operating Instructions
Panasonic PC Software Package Wv Asm200 Series Operating Instructions
Have a look at the manual Panasonic PC Software Package Wv Asm200 Series Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
8081 Click the [List] tab. The search result will be displayed with thumbnail images in list form. When "Face image" is set for the search condition, the search result will be listed in order of the highest score of similarity. When "Face image" is not set for the search condi- tion, the search result will be listed in order of the detection time. n Number of the search result, page information Total number of search result and the page number of the currently displayed page will be displayed as shown below. The buttons to turn pages will be displayed as shown below. n Filtering display of search result It is possible to display search result after filtering the result using the similarity filtering slider located below the search result display area. By moving the slider to the left or right, it is possible to specify the lowest similarity score and only images with the similarity score higher than the value speci- fied by the slider. Play recorded image in search result Click the [Search] button. The search result list will be displayed → . There are two types of displaying the search result; "Timeline" and "List". Click the [Timeline] tab. The search result will be displayed with mapped thumbnail images on the plane with two axes of Time" and "Place".
8283 Note:When filtered by the similarity score, filtering of • the search result of both the timeline display and the list display will start and display the result again. (Not starting search again) n Attribute information In the search result, the face image and the additional information of "Similarity" and "Time" (when image is captured) will be displayed. Operation from thumbnail image of search result The following are available by operation using thumb- nail image of search result Apply to filter of the face search • Right-click on a thumbnail image and select "Set this face to filter 1" from the right-click menu. The selected image will be displayed in the → section of "Person" of the search display win- dow. Register as person (face) of whom alarm is to be • notified Right-click on the thumbnail image and select "Register this face" from the right-click menu. The "Select and register face image from → snapshot” window will be displayed. ("Register this face" (☞ page 89)) Playback of recorded images • Right-click on the thumbnail image and select "Play the video" from the right-click menu. Image recorded at the alarm occurrence time → will be played. Recorded images will be played on the operation window of the operation software. Note: When the operation window is used with a multi- • screen, it will be switched to 1-screen. It is also possible to play recorded images by • double-clicking a thumbnail image.
8283 Step 1 Click the [Alarm] tab on the "Face Search" window. The details are as follows. ■ Event timestamp Time and date when the face search alarm is occurred ■ Cameras Name of the camera that notified of the face search alarm ■ Matching face Indicates the thumbnail image verified by the face search server ■ Registered face Indicates the matched face image by the face search in the registered face thumbnail images ■ Name Indicates the face of the appeared person ■ Remarks Additional information relating to the registered per- son (face), etc. ■ Similarity Score of facial similarity between the registered face image and the detected face image Check the alarm notification Display the "Alarm notification" window When received a face search alarm notification, contents of the alarm wi\ ll be displayed in list form. Note: When displaying a window (such as the search • window or the generate report window) other than the "Alarm" page on the face search window, the displayed window will not automatically be switched to the "Alarm" page even if received an alarm notification. The "Alarm" page will automatically be displayed • by receiving a face search alarm when the face search window is not displayed.
8485 Step 1 Right-click on a line of the person whose video appearance is to be checked in the notification list on the "Alarm" page, and then select [Play the video] from the right-click menu. Recorded images will be played on the operation → window. Note: When the operation window is used with a multi- • screen, it will be switched to 1-screen. It is also possible to play recorded images by • double-clicking a list item. Play images recorded by the alarm recording Play images recorded at the alarm occurrence time from the recorder.
8485 Search the alarm notification Search by time and date Perform the alarm notification search by designating time and date. Step 1 Click the [Alarm search] tab on the "Face Search" window. Step 2 Select the start time and the end time of "Event timesramp". ■ From Select the start time of period to be searched from "2008/1/1" - "2034/12/31". Select a number for hour from "0" - "23". Select a number for minute (1 minute step). ■ To Select the end time of period to be searched from "2008/1/1" - "2034/12/31". Select a number for hour from "0" - "23". Select a number for minute (1 minute step). Step 3 Click the [Search] button. The "Search result" window will be displayed. →
8687 Search by person (face) Perform the face search by designating face features. Step 1 Click the [Alarm search] tab on the "Face Search" window. Step 2 Designate a face image. ■ Person icon The face image setting can be configured as follows. Display the "List of registered faces" window by • left-clicking the person icon, and then select a face image. Right-click on the person icon, and then select • from the following menu. [Select face image from the registered list] Drag and drop the face image of the search result • onto the person icon. ■ [Clear] button Clear the search condition. Designate the person (face image) to be searched Select from the registered images • Right-click the person icon of "Faces" on the "Alarm search" page and select [Select face image from the registered list] from the menu. The "List of registered faces" window will be → displayed. ■ List item Select a person to be searched from the "List of reg- istered faces" displayed on the right side. ■ [OK] button Close the "List of registered faces" window and apply the search condition. ■ [Cancel] button Close the "List of registered faces" window and can- cel the search condition.
8687 Designate the camera to be searched Check the checkbox of the camera to be searched. Note:The cameras obtained by "Face search server • registration" of the setup software will be dis- played in the tree. When the checkbox of parent node (server) is • checked, the checkboxes of all the child nodes will be checked automatically. When the checkbox of "Parent node (server)" is • unchecked, the checkboxes of all the child nodes will be unchecked automatically. Step 3 Click the [Search] button. The "Search result" window will be displayed. → Play recorded image in search result Click the [Search] button. The "Search result" window will be displayed. → There are two types of displaying the search result; "Timeline" and "List". Click the [Timeline] tab. The search result will be displayed with mapped thumbnail images on the plane with two axes of "Time" and "Place".
8889 Click the [List] tab. Search result will be displayed in list form. ■ Number of the search result, page information Total number of search result and the page number of the currently displayed page will be displayed as shown below. The buttons to turn pages will be displayed as shown below. Operation from thumbnail image of search result The following are available by operation using thumb- nail image of search result Apply to filter of the face search • Right-click on a thumbnail image and select "Set this face to filter 1" or "Set this face to filter 2" from the right-click menu. The selected image will be displayed in the → section of [Person] of the search display win- dow. Register as person (face) of whom alarm is to be • notified Right-click on the thumbnail image and select "Register this face" from the right-click menu. The " → Select and register face image from snapshot" window will be displayed. ("Register this face" (☞ page 89)) Apply to filter of the alarm search • Right-click on the thumbnail image and select "Set this face to alarm search filter" from the right- click menu. The selected image will be displayed in the → section of [Person] of the alarm search display window. Playback of recorded images • Right-click on the thumbnail image and select "Play the video" from the right-click menu. Image recorded at the alarm occurrence time → will be played. Recorded images will be played on the opera- tion window of the operation software. Note: When the operation window is used with a multi- • screen, it will be switched to 1-screen. It is also possible to play recorded images by • double-clicking a thumbnail image.
8889 Register a face for the alarm notification Register from a face thumbnail image It is possible to register from the search result of "Search face" or "S\ earch person (face)" of "Search the alarm notification". Step 1 On the "Search result" window of "Search person (face)", right-click on a face thumbnail image and select "Register this face" from the right-click menu. The "Select and register face image from snap- → shot" window will be displayed. Step 2 After entering the following information, click the [OK] button. ■ Name ■ Age ■ Gen der Note: The alarm sensitivity is the sensitivity to be used • to match with the registered faces. This setting can be applied to each person. Normally, use with the default setting. The lower the alarm sensitivity level is, the higher • the rate of matching with the registered faces will become. However, the matching accuracy may drop. The higher the alarm sensitivity level is, the lower the rate of false matching with the regis- tered faces will become. However, the matching rate with the registered faces may drop.
9091 Register from recorded images It is possible to register from playback images on the recorder. Step 1 Play recorded images while displaying the operation window with 1-screen. Step 2 Pause the playback when the person to be registered appeared. When detection of the face image succeeded, → square frames will be displayed around all the de- tected faces. Step 3 Right-click on the face image to be registered and select "Face select" from the right-click menu. The face search from recorded images will start → and the result will be displayed with the detected faces in list form. The detected face images will be checked and verified, and the checkbox of the face image with the highest score will automatically be checked.Step 4 Check the checkbox of the face image to be regis- tered, and then click the [New registration] button. The " → Select and register face image from snap- shot" window will be displayed. Step 5 After entering the following information, click the [OK] button. ■ Name ■ Age ■ Gender Note: The alarm sensitivity is the sensitivity to be used • to match with the registered faces. This setting can be applied to each person. Normally, use with the default setting. The lower the alarm sensitivity level is, the higher • the rate of matching with the registered faces will become. However, the matching accuracy may drop. The higher the alarm sensitivity level is, the lower the rate of false matching with the regis- tered faces will become. However, the matching rate with the registered faces may drop.