Panasonic PC Software Package Wv Asm200 Series Operating Instructions

							130131
When the [Go to date] button on the "Quick playback" panel is clicked
When a message window is displayed by clicking the [Go to date] button, \
refer to the following to solve the 
problem.
MessageSolution
The designated recorder is not compati-
ble to play SD memory data. This message will be displayed when the designated recorder is not 
•	
compatible with the "SD memory rec." function and the "SD 
memory rec." checkbox is checked.  
Uncheck the "SD memory rec." checkbox.
When the [Download...] button on the "Download" panel is clicked
When a message window is displayed by clicking the [Download...] button \
on the "Download" panel, refer to 
the following to solve the problem.
Message Solution
The designated recorder is not compati-
ble to download SD memory data. This message will be displayed when the designated recorder is the 
•	
HD300 and the "SD memory rec." checkbox is checked.  
Uncheck the "SD memory rec." checkbox.
The designated recorder is not compati-
ble to download audio data. This message will be displayed when the designated recorder is the 
•	
ND300 and the "Audio" checkbox is checked.  
Uncheck the "Audio" checkbox.
Audio will not be recorded by SD mem-
ory recording. Uncheck one of them. This message will be displayed when the designated recorder is the 
•	
ND200 or ND400 and both the checkboxes of "Audio" and "SD 
memory rec." are checked. Uncheck one of them.
Up to 24 hours can be specified for time 
length to download. This message will be displayed when the designated download 
•	
time range is more than 24 hours.  
Designate the download time range less than 24 hours.
The designated recorder supports "CD/
DVD burn" only. This message will be displayed when the designated recorder is the 
•	
ASR500 and any of the "Viewer" checkbox, the "Audio" checkbox 
or the "SD memory rec." checkbox is checked. 
Uncheck all the checkboxes.
When the [OK] button is clicked on the window for a folder designation
When a message window is displayed by clicking the [OK] button on the wi\
ndow for a folder designation, refer 
to the following to solve the problem.
Message Solution
The same file name exists in the 
selected folder. Are you sure you wish 
to overwrite? This message will be displayed when the same file name already 
•	
exists in the selected folder.  
Click the [OK] button to overwrite the existing file.  
When the [Cancel] button is clicked, the window for a folder 
designation will be displayed again. 
						

							132133
When the [Audio transmission] button is clicked
When a message window is displayed by clicking the [Audio transmission] \
button, refer to the following to solve 
the problem.
MessageSolution
Are you wish to start audio 
transmission?
When audio transmission starts, audio 
from the camera will not be heard. This message will be displayed by clicking the [Audio transmission] 
•	
button when "Interactive" and "OFF" are selected for "Audio mode" 
and "Audio output" respectively on the setup menu of the camera. 
Click the [OK] button to start audio transmission. When the [Cancel] 
button is clicked, audio transmission will be canceled.
When an error occurred
When loading the setup file, a message window is displayed at an error o\
ccurrence, refer to the following to 
solve the problem.
Message Solution
Please restart the operating system. 
When this message is displayed after the 
restart, please reinstall the software. This message will be displayed when a critical error occurred.  
•	
Restart the operating system of the PC.  
When this problem is not solved even after the restart, reinstall the 
software.
Required data was not found in DB. 
Please load the backup data. When 
there is no backup data, please reinstall 
or initialize the setup data. This message will be displayed when the required data was not 
•	
found in the database.  
Import the backup data.
When the [Image display] button on the VMD search tab is clicked
Message Solution
Failed to obtain the image file. This message will be displayed when failed to obtain the images 
•	
from the recorder.  
Confirm that the recorded data exists in the searching range. 
						

							132133
When the [List] button on the [SD] tab is clicked
While the alarm logs or manual/schedule logs in the log list window are \
being 
selected
MessageSolution
List acquisition was failed due to FTP 
connection error. This message will be displayed when FTP connection failed due to 
•	
such a reason as no available FTP ports.  
Confirm that the FTP access to camera is possible with the 
environment in use.
The SD function is not enabled. This message will be displayed in the following cases.
•	
When a camera without the SD memory card slot (such as WV-
•	
SP102) is accessedThe SD function is unavailable since the camera is not equipped 
→→
with the SD memory card slot.
When "Not use" is selected for the SD memory card setting on 
•	
the cameraChange the setting to "Use".
→→
When no SD memory card is inserted in the camera
•	
Insert an SD memory card into the camera.
→→
The SD memory card is inserted in the camera, but the card is 
•	
not formatted correctly.Format the SD memory card. Refer to operating instructions of 
→→
the camera for further information.
When there are no H.264 image recorded by the SD memory re-
•	
cording (When there are only JPEG images)Select "H.264" for the setting of SD memory recording.
→→
List acquisition was failed due to user 
authentication error. This message will be displayed when the administrator name and the 
•	
password configured for device registration are incorrect.  
Configure the administrator name and password registered on the 
camera.
List acquisition was failed (due to other 
FTP errors). This message will be displayed when network disconnection occurs 
•	
during list acquisition.  
Check the network. 
						

							134135
Operation using the system controller
This software can be operated using an optional system controller.
The following are descriptions of the available functions using the syst\
em controller and of how to operate.
It is possible to restrict operable functions according to the user type\
 (administrator or the registered users).Important: It is necessary that the license for the Extension Software WV-ASE201 ha\
s been issued.
•	
Operation response may be slow when comparing with an analog system sinc\
e operations are performed 
•	
via a network.
Turn on the power of the system controller after confirming that this \
software started up.
•	
When the LAN cable is disconnected, a connection error with the system c\
ontroller may occur.
•	
When the [ADJUST] button is pressed, a connection error with the system \
controller may occur.
•	
Note: [ ] indicates the button. When "+" exists between the buttons, press the\
 both the buttons at once. When the 
•	
indication "→" exists after an operation, the next operation is required to complete \
the operation.
CDA
•	  B of [Joystick], [JogDial], [Shuttle ring], [Zoom knob] indicate the oper\
ation direction of each inter-
face.
Basic
Function Key operation of the WV-CU950 Note
Number/numeric value entry Numeric keys
Cancel the entry [CLEAR]
Camera selection Entry of camera number →
[CAM (SET)] The live image of the selected camera 
•	
will be displayed on a 1-screen on the 
operation window.
Assignment of numbers to the cameras 
•	
is required in advance via the setup soft-
ware.
Group selection Entry of group number →
[RECORDER] The selected group will be displayed on 
•	
the operation window.
Assignment of numbers to the groups is 
•	
required in advance via the setup soft-
ware.
Sequence selection Entry of sequence number →
[TOUR SEQ] The selected sequence will be started on 
•	
the operation window.
Assignment of numbers to the se-
•	
quences is required in advance via the 
setup software.
Sequence stop [SEQ PAUSE]
Screen pattern change [MULTI SCREEN] The screen pattern of the operation window 
changes every time the button is pressed.
1-screen display [F1] The screen of the operation window is 
changed to the 1-screen pattern.
4-screen display [F2] The screen of the operation window is 
•	
changed to the 4-screen pattern.
The displayed 4-screen is changed in 
•	
order of 4A  → 4B → 4C  → 4D every time 
the button is pressed.
9-screen display [F3] The screen of the operation window is 
changed to the 9-screen pattern. 
						

							134135
16-screen display[F4] The screen of the operation window is 
changed to the 16-screen pattern.
Acknowledge the alarm [ACK] The same operation will be performed as 
•	
when the [Play] button on the "Alarm no-
tification" window is clicked.
[ALARM] The same operation will be performed as 
•	
when the [Live] button on the "Alarm no-
tification" window is clicked.
Reset an alarm [ALM RESET] The same operation will be performed as 
when the [ALM] button on the status bar is 
clicked.
Determine [ENTER] The same operation will be performed as 
when the [Enter] key of the PC keyboard is 
pressed.
Cancel [MON(ESC)] The same operation will be performed as 
when the [Esc] key of the PC keyboard is 
pressed.
Operate the cameras
Basic operationKey operation of the WV-CU950 Note
Preset position registration Enter a preset number → [SHIFT] 
+ [PRESET]
Move the camera to the pre-
set position Enter a preset position number → 
[PRESET] When no preset position number is entered, 
the camera will move to the home position.
Pan/tilt [Joystick CDA B] The displayed image will move to the direc-
tion in which the joystick is tilted.
Adjust the brightness Set brighter
•	
Set darker
•	 [IRIS OPEN]
[IRIS CLOSE] Adjustment of the brightness will continue 
until the pressed button is released.
Adjust the focal point Set farther
•	
Set nearer
•	
Perform the auto focus 
•	
function [FOCUS FAR]
[FOCUS NEAR]
[TOP] Adjustment of the focal point will continue 
until the pressed button is released.
Adjust the zoom Set to the "wide" side
•	
Set to the "tele" side
•	 [Zoom knob A]
[Zoom knob B] Zooming will continue until the zoom knob 
is being rotated.
External control 1/2
 Set AUX1 to ON
•	
Set AUX1 to OFF
•	 [AUX1 ON]
[SHIFT] + [AUX1 ON] The mode setting can be configured on 
•	
the receiver. (Only the latch mode is 
available for the cameras.)
When setting for an event such as the 
•	
sequence display, set to the latch mode.
Operation for "AUX2" can be performed 
•	
in the same manner as for "AUX1".
Auto mode Start the auto mode
•	
Stop the auto mode
•	 [A]
[B]
Auto track Start auto track
•	 [TOP]
This function is available when "ON" is 
selected for "Auto track". 
						

							Operate the recorder
Basic operationKey operation of the WV-CU950 Note
Start recording manually

•	Stop	the	manual	recording [REC]
[SHIFT] + [REC]
Playback of recorded images
 PAUSE
•	
FF
•	
REW
•	
NEXT IMAGE
•	
PREV IMAGE
•	
NEXT RECORD
•	
PREV RECORD
•	
Go to last
•	
STOP
•	
SKIP
•	
REV SKIP
•	 [PLAY/PAUSE]
[SHIFT] + [PLAY/PAUSE]
[Shuttle ring B]
[Shuttle ring A]
[JogDial B] during pausing
[JogDial A] during pausing
[JogDial B] while holding down 
[SHUTTLE HOLD]
[JogDial A] while holding down 
[SHUTTLE HOLD]
[GO TO LAST]
[STOP]
[+]
[-]
136 
						

							For U.S. and Canada:
Panasonic System Communications Company of North America,
Unit of Panasonic Corporation of North America
www.panasonic.com/business/
For customer support, call 1.800.528.6747
Two Riverfront Plaza, Newark, NJ 07102-5490
Panasonic Canada Inc.5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada 
(905)624-5010
www.panasonic.ca
 
© Panasonic System Networks Co., Ltd. 2013 N0913-1123       PGQP1625YA       Printed in Japan
For Europe and other countries:
Panasonic Corporation
http://panasonic.net
Importer's name and address to follow EU rules:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany