Panasonic PC Software Package Wv Asm200 Series Operating Instructions

							9091
Register from snapshot
It is possible to register from a still image (snapshot) whose format \
is JPEG, PNG or BMP.
Step 1
Click the [Face management] button on the "Face 
Search" window.
The "List of registered faces" window will be dis-
 
→
played.
Step 2
Click the [New registration] button. The "Select and register face image from snap-
 
→
shot" window will be displayed.
Step 3
Click the [Browse...] button.
Select an image file to be read on the file selection 
window.The face detection from the image will start and 
 
→
square frames will be displayed around all the 
faces when face images are detected.
Step 4
Click a face image to be registered from the list, and 
click the [OK] button after entering information such 
as name, age and gender. The registered person (face) will be displayed in 
 
→
the list on the "List of registered faces" window.
Step 5
 Click the [OK] button.
Note: The alarm sensitivity is the sensitivity to be used 
•	
to match with the registered faces. This setting 
can be applied to each person. Normally, use with 
the default setting.
The lower the alarm sensitivity level is, the higher 
•	
the rate of matching with the registered faces will 
become. However, the matching accuracy may 
drop. The higher the alarm sensitivity level is, the 
lower the rate of false matching with the regis-
tered faces will become. However, the matching 
rate with the registered faces may drop. 
						

							9293
Display the statistical graphics of age/gender/head-count
Display the statistical results
It is possible to display the statistic results of age, gender and head \
count for each camera.
Step 1
Click the [Age and Gender] tab on the "Face search 
monitor" window. The "Age and Gender" page will be displayed.
 
→
Step 2
Select the start date and the period to display the 
statistical results in the "Display period" section.
Select the start date of period from "2008/1/1" - 
"2034/12/31". Select a number for month from "1" - 
"12".
Step 3
Select the face search server and the cameras to dis-
play statistics in the "Camera" section.
Note: The cameras obtained by "Face search server 
•	
registration" of the setup software will be dis-
played in the tree.When the checkbox of parent node (server) is 
•	
checked, the checkboxes of all the child nodes 
will be checked automatically.
When the checkbox of "Parent node (server)" is 
•	
unchecked, the checkboxes of all the child nodes 
will be unchecked automatically.
Step 4
 Click the [Generate report] button. The statistical results will be displayed
 
→ .
The following display options can be set.
■  Calendar
Select the date to display statistics in the [Calender] 
section.
Note: Only the date with data will be displayed.
•	
Date without data will be displayed with the "×" 
•	
mark.
■ Graph type
Select the graph type to be displayed from the follow-
ing.
Daily trend (15 minute scale)/Daily trend (30 minute 
scale)/Daily trend (1 hour scale)/Weekly trend/Days 
trend/Monthly trend 
						

							9293
■ [Stack]/[Ratio] buttons
Switches the graph display based on the accumu-
lated data or the proportional data.
Note: The line graph is available only when displaying 
•	
based on the accumulated data (stack) and the 
data point labels will be displayed together.
■ [By gender]/[By total] buttons
Switches the graph display based on the gender or 
the total number.
Step 1
Click the [Download CSV file] button on the "Generate 
report" window. The folder selection window will be displayed.
 
→
Step 2
Select the destination folder of the CSV file to be 
downloaded and click the [OK] button. 
The statistics data will be saved as the CSV file 
whose character code is UTF-8 and comma sepa-
rated.
The name of the downloaded CSV file will be as fol-
low.
"ccccccc_yymmdd000000_yymmdd000000_00_00.
csv"
ccccccc: Name of the camera or "total"
yymmdd000000 (1st part): Start date of the period  (Year in last 2 digits)
yymmdd000000 (2nd part): End date of the period  (Year in last 2 digits)CSV file format
Output example
#GUID,Aggregated Date,Gender Code,Age 
Code,Period of time,The number of people
00200001-0000-0000-0000-
192168001100,2013/07/24,1,3,0900,0
00200001-0000-0000-0000-
192168001100,2013/07/24,1,3,0915,0
00200001-0000-0000-0000-
192168001100,2013/07/24,1,3,0930,0
00200001-0000-0000-0000-
192168001100,2013/07/24,1,3,0945,0
00200001-0000-0000-0000-
192168001100,2013/07/24,1,3,1000,0
...
The data item name and the each 15 minutes sum-
mary information will be output on the first line and 
the second line respectively.  
[GUID]
Camera GUID
[Aggregated Date]
Date
[Gender Code]
Gender code
-1: Unknown / 0: Male / 1: Female
[Age Code]
Age code
-1: Unknown / 1: 10s or younger / 2: 20s / 3: 30s /  
4: 40s / 5: 50s 6: 60s or older
[Period of time]
Time 15 minutes each
[The number of people]
Head count
■ [Male]/[Female]/[Unknown] checkbox
Check the checkbox to display the desired informa-
tion in the graph display.
■ Circle graph
Select the items to be displayed with the data labels 
of the circle graph.
Each time clicked on the circle graph, the label dis-
play will be switched to [Head count] → [Ration] → 
[Title] → [Head count].
Download the statistics results as a CSV file
It is possible to download the data used for the statistics display as a\
 CSV file. 
						

							9495
Change the display setting (Hide the display) 
Display the border frame for face (Hide the border frame) 
It is possible to display/hide the border frame displayed around a face \
when detected.Important: This function will be valid only when a camera having the face search fu\
nction is connected to ASM200 and 
•	
the face search function is ON.

Confirm that the checkbox on the left of "Frame display with face (K)"\
 under "Display (V)" on the menu bar of 
the operation window or the live window is unchecked. Then, select "Fram\
e display with face (K)" under 
"Display (V)". Square border frame will be displayed around the detected face and the c\
heckbox on the left of "Frame dis-
 
→
play with face (K)" under "Display (V)" will be checked.

Confirm that the checkbox on the left of "Frame display with face (K)"\
 under "Display (V)" on the menu bar of 
the operation window or the live window is checked. Then, select "Frame \
display with face (K)" under "Display 
(V)".The square border frame around the detected face will be hidden and the \
checkbox on the left of "Frame 
 
→
display with face (K)" under "Display (V)" will be unchecked. 
						

							9495
Save recorded images
Step 1
Click the "Download" bar on the function panel.
The "Download" panel will be displayed.
 
→
The following are descriptions about each item dis-
played on the "Download" panel.
n  Recorders in the tree view
The recorders and the cameras as the target sources 
of download will be displayed. Select the desired 
recorders and the cameras.
n Start
Select the start time of time range for download. 
Select the start time from "Jan/01/2005" - 
"Dec/31/2034". Select a number for hour from 
"AM12" - "PM11". Select a number for minute from 
"00" - "59". Select a number for second from "00" - 
"59".
n End
Select the end time of time range for download. 
Select the end time from "Jan/01/2005" - 
"Dec/31/2034". Select a number for hour from 
"AM12" - "PM11". Select a number for minute from 
"00" - "59". Select a number for second from "00" - 
"59".
n Viewer
The viewer software will be downloaded together with 
recorded images.
n Audio
Audio will be downloaded together with images.
n SD memory rec.
Recorded images transferred from the SD memory 
card in the camera to the recorder will be down-
loaded.
n [Download...] button
The folder selection window will be displayed.
n CD/DVD burn
After download is completed, the recorded images 
will be written on a CD/DVD recording media.
The supported media formats are CD-R/RW, DVD-R/
RW and DVD+R/RW.
Download recorded images
It is possible to download recorded image from the recorder onto the PC.\
 FTP function is used to download 
recorded images.
Download recorded images using the "Download" panel.
Note: Recorded images of up to 64 cameras can be downloaded simultaneously. Wh\
en multiple camera channels 
•	
are selected, download of recorded images will be performed by the camer\
a channels in order.
It is possible to select two or more recorders for the target sources of\
 download, but it is impossible to 
•	
download their images simultaneously. 
When the same camera channel is selected two or more times, the address \
and underscore (_) will be 
added to the head of each file name.
The maximum recording duration available for download is 24 hours.
•	
Images recorded in the designated time range will be divided into file\
s of 10 minutes length each and down-
•	
loaded. The maximum time length of a downloaded file is 10 minutes. 
						

							9697
Step 2
Select the recorders and the cameras as the target 
sources of download.
Step 3
Designate time range for download, and then click 
the [Download...] button. The window to specify a folder as the destination 
 
→
of the downloaded files will be displayed.
The following are descriptions about each item dis-
played on the "Browse For Folder" window.
n  Destination folder
Specify a folder as the destination of downloaded 
files.
n [Make New Folder] button
Click this button to create a new folder in the selected 
folder.
n [OK] button
The window will close and the download will start.
n [Cancel] button
The window will close and the download will be can-
celed.
Note: The overwrite warning window will be displayed 
•	
when a file of the same name already exists in the 
folder. Click the [Cancel] button when wishing not 
to overwrite the file. In this case, specify another 
folder.
Step 4
Click the [OK] button after specifying a folder. Download will start and the "Download" window 
 
→
will be displayed. To cancel download, click the 
[Cancel] button or the [×] button at the top right of 
the window. Downloaded files will be stored in the 
specified folder.
The following are descriptions about each item dis-
played on the "Download" window.
n  Name of the file currently being downloaded
Name of the file currently being downloaded will be 
displayed.
n Number of files
"Number of files downloaded"/"Number of files to be 
downloaded".
n Progress bar
The status of the download will be displayed.
n List of files
Information of the downloaded files will be displayed 
in list form.
File: Downloaded files will be displayed.
Result: The status of the download file will be dis-
played.
OK: Download of the file is successfully completed.
NG: Download of the file failed.
No data: No data was found in the selected recorder.
Failed to burn : The files could not be written on the  CD/DVD media since the available space is not 
enough.
Note: If the download failed, the result will be filed as a 
•	
system log. Refer to WV-ASM200 Setup 
Instructions (PDF) for further information about 
logs. 
						

							9697
When the "CD/DVD burn" checkbox is checked, writ-
ing on the CD/DVD media will automatically start after 
downloading all the files.Note: It is necessary to insert a writable media into the 
•	
CD/DVD drive before starting download.
When the total size of the downloaded files is 
•	
greater than the available space of the CD/DVD 
media, only a part of the files will be written to fill 
in the space.
When writable media exists in two or more drives, 
•	
one of them will automatically be selected.
When the viewer software is copied, the software 
•	
will also be written on the media as well as other 
files.
Writing is unavailable when any file already exists 
•	
in the CD/DVD media.
  In this case, erase the existing files or prepare a 
new media.
n [OK] button/[Cancel] button
The [OK] button will be displayed when the download 
is completed. The [Cancel] button will be displayed in 
the process of download.
When the [OK] button is clicked, the "Download" win-
dow will close. When the [Cancel] button is clicked in 
the process of download, the download will be can-
celed.
When the download is canceled
The confirmation window will be displayed.
Click the [OK] button.
The download will be canceled. When the [Cancel] 
button is clicked, download will continue.
Note: It is impossible to cancel the download in the 
•	
process of writing on the CD/DVD media.
Step 5
When the download is completed, click the [OK] but-
ton. The "Download" window will close.
 
→
Note: When trying to close the software or log out in the 
•	
process of download, the confirmation window 
will be displayed. To cancel download, click the 
[OK] button. To continue the download, click the 
[Cancel] button.
When continuing the download, the software will 
•	
not be closed or the logout process will be can-
celed. When canceling the download, the soft-
ware will be closed or the logout process will be 
performed. In this case, the file being downloaded 
will be deleted. The downloaded file will not be 
deleted.
It is impossible to exit or log out of the software in 
•	
the process of writing on the CD/DVD media. 
						

							9899
Download while playing recorded images
When right-clicking on the image being played, the pop-up menu will be d\
isplayed. When "Download" is 
selected from the displayed pop-up menu, the "Download" panel will open.\
 Download recorded images by fol-
lowing from step 2 of the "Download recorded images" section (+ page 95). Refer to the "Playback" section (+ 
page 67) for how to display the playback window.
Download recorded images using the "Search" panel
When right-clicking on a result displayed in the search result list on t\
he "Search" panel, the pop-up menu will 
be displayed. When "Download" is selected from the displayed pop-up menu\
, the "Download" panel will open.
Download recorded images by following from step 2 of the "Download recor\
ded images" section (+ page 95).
Refer to the "Play recorded images using the "Search" panel section ( + page 77) for further information about 
the "Search" panel.
About the downloaded files
File name of a downloaded file will be as follows.
Example: 01_070209121500_0515.n3r (channel number:1, start time:2007/02\
/09 12:15:00, length:5 minutes 
and 15 seconds)
Note: When the SD memory data is downloaded, the letter "_SD" will be attached\
 to the time length of a file.  
•	
Example: 01_070209121500_0515_SD.n3r
File name of the downloaded audio data will be as follow.  
•	
Example: 01_070209121500_0515_SD.n3r
File extensions of the file downloaded from each recorder will be as f\
ollows.  
•	
When downloaded from the ND200, ND300, ND400, HD600, NV200: n3r (n3a fo\
r audio file)
When downloaded from the HD300: h3r (h3a for audio file)
•	
When downloaded from the ASR50: avi
•	
Operate the downloaded file
It is necessary to use the dedicated viewer software to play and operate\
 the downloaded files. When the 
"Viewer" checkbox in the "Download" panel is checked, the viewer softwar\
e will be downloaded together with 
the files. Refer to the "Download recorded images" section (+ page 64) for further information. 
						

							9899
Step 1
Display the image to be saved. Refer to the "Monitor live images" section (
 
→ + 
page 45) or the "Playback" section (+ page 67) 
for how to display images.
Note: Saving is available only when displaying images 
•	
on a 1-screen.
Step 2
Select "Save as JPEG file(S)..." under "File(F)" on the 
menu bar or click the [Save as JPEG file] icon on the 
tool bar. 
The "Save As" window will be displayed.
 
→
Note: The "Save As" window can be opened by select-
•	
ing "Save as JPEG file..." from the pop-up menu 
displayed by right-clicking on the image display 
area.
The following are descriptions about each item dis-
played on the "Save As" window.n  Save in:
Specify a folder as the destination of the file to be 
saved.
n File name:
Enter the name of the file to be saved. The default 
name is as follows.
Example: 20061008110340.jpg (time & date when the 
file is saved:
Note: When the time & date are not displayed on the 
•	
status bar, time & date part of the default file 
name will be determined according to the current 
time of the PC.
n [Save] button
The "Save As" window will close and the image will 
be saved as a JPEG file and stored in the selected 
folder.
n [Cancel] button
The "Save As" window will close without saving.
Step 3
Click the [Save] button after specifying a destination 
folder and the file name. The image will be saved as a JPEG file with the 
 
→
specified name and stored in the specified folder.
Note: The image to be saved is the image displayed in 
•	
step 2.
Save as a JPEG file
It is possible to save the live image or recorded images as a JPEG file.\
 
						

							100101
Print
It is possible to print an image of live images or recorded images.
Step 1
Display the image to be printed. Refer to the "Monitor live images" section (
 
→ + 
page 45) or the "Playback" section (+ page 67) 
for how to display images.
Note: Printing is available only when displaying images 
•	
on a 1-screen.
Step 2
Select "Print(P)..." under "File(F)" on the menu bar or 
click the [Print] icon on the tool bar.
The "Print Preview" window will be displayed.
 
→
Note: The "Print Preview" window can be opened by se-
•	
lecting "Print..." from the pop-up menu displayed 
by right-clicking on the image display area.
The following are descriptions about each item dis-
played on the "Print Preview" window.
n  [Print...] button
The "Print" window will be displayed.
n Time & date
Time & date when the file is printed will be displayed. 
The time & date will be followed by an asterisk "*" 
when the daylight saving time is applied.
Note: When the time & date are not displayed on the 
•	
status bar, the current time of the PC will be 
printed.
n Recorder/encoder
The recorder title will be displayed.
Note: When displaying an image from a camera that is 
•	
not registered in the recorder, "--" will be dis-
played.
When displaying an image from an encoder that is 
•	
not registered in the recorder, the encoder title will 
be displayed.
n Camera
The camera title will be displayed.
Step 3
Click the [Print...] button. The "Print" window will be displayed.
 
→
Step 4
Click the [OK] button after completing the settings. Printing of the image currently being displayed 
 
→
will start.
Note: The image to be printed is the image displayed in 
•	
step 2.