Panasonic Pc Software Package Wv Asm10 Operating Instructions
Have a look at the manual Panasonic Pc Software Package Wv Asm10 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 56
56
Save/load/initialize the setup data [Save/Load]
The setup data can be saved/loaded/initialized.
Save the setup data as a backup
Important:
Back up the setup data periodically by copying it onto an external hard disk drive or other storage medium. When
the hard disk drive on the PC in use is damaged, it may be impossible to recover the setup data.
Step 1
Click the [Maintenance] button.
Step 2
Click the [Save/Load] tab.
→The Save/Load page will be displayed.The following are descriptions about each item...](http://img.usermanuals.tech/thumb/58/68581/w64_wv-asm10_en_om_d-55.png "Page 56
56
Save/load/initialize the setup data [Save/Load]
The setup data can be saved/loaded/initialized.
Save the setup data as a backup
Important:
Back up the setup data periodically by copying it onto an external hard disk drive or other storage medium. When
the hard disk drive on the PC in use is damaged, it may be impossible to recover the setup data.
Step 1
Click the [Maintenance] button.
Step 2
Click the [Save/Load] tab.
→The Save/Load page will be displayed.The following are descriptions about each item...")
![Page 57
57
Note:
When a message window is displayed by clicking
the [Save] button, refer to the Displayed messages
and solutions section on page 73 and follow the
instructions.Step 5
Click the [OK] button on the confirmation window.
→The Save/Load page will be displayed again.
Load the setup file
Important:
•When loading of the setup file starts, all the setup data of this software will be overwritten.
•When loading of the setup file is completed, the setup software will restart.
Step 1
Display the Save/Load...](http://img.usermanuals.tech/thumb/58/68581/w64_wv-asm10_en_om_d-56.png "Page 57
57
Note:
When a message window is displayed by clicking
the [Save] button, refer to the Displayed messages
and solutions section on page 73 and follow the
instructions.Step 5
Click the [OK] button on the confirmation window.
→The Save/Load page will be displayed again.
Load the setup file
Important:
•When loading of the setup file starts, all the setup data of this software will be overwritten.
•When loading of the setup file is completed, the setup software will restart.
Step 1
Display the Save/Load...")
![Page 58
58
Initialize the setup file
Important:
•When initialization of the setup file starts, all the setup data of this software will be initialized. It is recommended
to back up the setup file before initializing the setup file.
•When initialization of the setup file is completed, the setup software will restart.
Step 1
Display the Save/Load page. (page 56)
Step 2
Click the [Execute…] button.
→The initialization start confirmation window will be
displayed.
Step 3
Click the [OK] button.
→Initialization of...](http://img.usermanuals.tech/thumb/58/68581/w64_wv-asm10_en_om_d-57.png "Page 58
58
Initialize the setup file
Important:
•When initialization of the setup file starts, all the setup data of this software will be initialized. It is recommended
to back up the setup file before initializing the setup file.
•When initialization of the setup file is completed, the setup software will restart.
Step 1
Display the Save/Load page. (page 56)
Step 2
Click the [Execute…] button.
→The initialization start confirmation window will be
displayed.
Step 3
Click the [OK] button.
→Initialization of...")
![Page 59
Settings relating to the external interface
59
When controlling functions of this software using an external interface, it is necessary to configure the settings relat-
ing to the external interface such as, ON/OFF for use of the external interface, the group number setting and the
sequence number setting.
External interface settings [Basic setup]
Click the [External I/F] button, and then click the [Basic setup] tab to display the Basic setup page.
External I/F
Select ON or OFF to determine whether or...](http://img.usermanuals.tech/thumb/58/68581/w64_wv-asm10_en_om_d-58.png "Page 59
Settings relating to the external interface
59
When controlling functions of this software using an external interface, it is necessary to configure the settings relat-
ing to the external interface such as, ON/OFF for use of the external interface, the group number setting and the
sequence number setting.
External interface settings [Basic setup]
Click the [External I/F] button, and then click the [Basic setup] tab to display the Basic setup page.
External I/F
Select ON or OFF to determine whether or...")
![Page 60
60
Step 1
Click the [External I/F] button.
Step 2
Click the [Group number] tab.
→The Group number page will be displayed.
The following are descriptions about each item dis-
played on the Group number page.
[Auto numbering] button
Group numbers will automatically be assigned in order
of the displayed list.[File export] button
The displayed list will be saved as a file in CSV format.
[Set] button
The edited settings will be saved and applied.
Step 3
Click the desired group title, and then click the...](http://img.usermanuals.tech/thumb/58/68581/w64_wv-asm10_en_om_d-59.png "Page 60
60
Step 1
Click the [External I/F] button.
Step 2
Click the [Group number] tab.
→The Group number page will be displayed.
The following are descriptions about each item dis-
played on the Group number page.
[Auto numbering] button
Group numbers will automatically be assigned in order
of the displayed list.[File export] button
The displayed list will be saved as a file in CSV format.
[Set] button
The edited settings will be saved and applied.
Step 3
Click the desired group title, and then click the...")
![Page 61
61
Auto numbering
Step 1
Display the Group number page. (page 60)
Step 2
Click the [Auto numbering] button.
→The confirmation window will be displayed.
Step 3
Click the [OK] button.
→Group numbers will automatically be assigned in
order of the displayed list.
Step 4
Click the [Set] button.
Export the group number list as a file
Step 1
Display the Group number page. (page 60)
Step 2
Click the [File export] button.
→The Save As window will be displayed.
Step 3
Enter the name of the file to be saved, and...](http://img.usermanuals.tech/thumb/58/68581/w64_wv-asm10_en_om_d-60.png "Page 61
61
Auto numbering
Step 1
Display the Group number page. (page 60)
Step 2
Click the [Auto numbering] button.
→The confirmation window will be displayed.
Step 3
Click the [OK] button.
→Group numbers will automatically be assigned in
order of the displayed list.
Step 4
Click the [Set] button.
Export the group number list as a file
Step 1
Display the Group number page. (page 60)
Step 2
Click the [File export] button.
→The Save As window will be displayed.
Step 3
Enter the name of the file to be saved, and...")
![Page 62
62
Step 1
Click the [External I/F] button.
Step 2
Click the [Sequence number] tab.
→The Sequence number page will be displayed.
The following are descriptions about each item dis-
played on the Sequence number page.
[Auto numbering] button
Sequence numbers will automatically be assigned in
order of the displayed list.[File export] button
The displayed list will be saved as a file in CSV format.
[Set] button
The edited settings will be saved and applied.
Step 3
Click the desired sequence title, and...](http://img.usermanuals.tech/thumb/58/68581/w64_wv-asm10_en_om_d-61.png "Page 62
62
Step 1
Click the [External I/F] button.
Step 2
Click the [Sequence number] tab.
→The Sequence number page will be displayed.
The following are descriptions about each item dis-
played on the Sequence number page.
[Auto numbering] button
Sequence numbers will automatically be assigned in
order of the displayed list.[File export] button
The displayed list will be saved as a file in CSV format.
[Set] button
The edited settings will be saved and applied.
Step 3
Click the desired sequence title, and...")
![Page 63
63
Auto numbering
Step 1
Display the Sequence number page.
(page 62)
Step 2
Click the [Auto numbering] button.
→The confirmation window will be displayed.
Step 3
Click the [OK] button.
→Sequence numbers will automatically be assigned
in order of the displayed list.
Step 4
Click the [Set] button.
Export the Sequence number list as a
file
Step 1
Display the Sequence number page.
(page 62)
Step 2
Click the [File export] button.
→The Save As window will be displayed.
Step 3
Enter the name of the file to...](http://img.usermanuals.tech/thumb/58/68581/w64_wv-asm10_en_om_d-62.png "Page 63
63
Auto numbering
Step 1
Display the Sequence number page.
(page 62)
Step 2
Click the [Auto numbering] button.
→The confirmation window will be displayed.
Step 3
Click the [OK] button.
→Sequence numbers will automatically be assigned
in order of the displayed list.
Step 4
Click the [Set] button.
Export the Sequence number list as a
file
Step 1
Display the Sequence number page.
(page 62)
Step 2
Click the [File export] button.
→The Save As window will be displayed.
Step 3
Enter the name of the file to...")
![Page 64
64
Step 1
Click the [External I/F] button.
Step 2
Click the [Camera number] tab.
→The Camera number page will be displayed.
The following are descriptions about each item dis-
played on the Camera number page.
[Auto numbering] button
Camera numbers will automatically be assigned in
order of the displayed list.[File export] button
The displayed list will be saved as a file in CSV format.
[Set] button
The edited settings will be saved and applied.
Step 3
Click the desired camera title, and then click...](http://img.usermanuals.tech/thumb/58/68581/w64_wv-asm10_en_om_d-63.png "Page 64
64
Step 1
Click the [External I/F] button.
Step 2
Click the [Camera number] tab.
→The Camera number page will be displayed.
The following are descriptions about each item dis-
played on the Camera number page.
[Auto numbering] button
Camera numbers will automatically be assigned in
order of the displayed list.[File export] button
The displayed list will be saved as a file in CSV format.
[Set] button
The edited settings will be saved and applied.
Step 3
Click the desired camera title, and then click...")
![Page 65
65
Auto numbering
Step 1
Display the Camera number page. (page 64)
Step 2
Click the [Auto numbering] button.
→The confirmation window will be displayed.
Step 3
Click the [OK] button.
→Camera numbers will automatically be assigned in
order of the displayed list.
Step 4
Click the [Set] button.
Export the camera number list as a file
Step 1
Display the Camera number page. (page 64)
Step 2
Click the [File export] button.
→The Save As window will be displayed.
Step 3
Enter the name of the file to be saved,...](http://img.usermanuals.tech/thumb/58/68581/w64_wv-asm10_en_om_d-64.png "Page 65
65
Auto numbering
Step 1
Display the Camera number page. (page 64)
Step 2
Click the [Auto numbering] button.
→The confirmation window will be displayed.
Step 3
Click the [OK] button.
→Camera numbers will automatically be assigned in
order of the displayed list.
Step 4
Click the [Set] button.
Export the camera number list as a file
Step 1
Display the Camera number page. (page 64)
Step 2
Click the [File export] button.
→The Save As window will be displayed.
Step 3
Enter the name of the file to be saved,...")
![Page 66
Exceptional settings of Windows Firewall
66
When using the external interface, configure the exceptional settings of Windows Firewall.
Step 1
Click [Windows Firewall] on the Control Panel.
→The Windows Firewall window will be displayed.
Step 2
Click the [Exceptions] tab, and then click the [Add
Program...] button.
→The Add a Program window will be displayed.
Step 3
Click the [Browse...] button.
→The Browse window will be displayed.
Step 4
Select asm10live.exe and click the [Open] button.
Note:
When this...](http://img.usermanuals.tech/thumb/58/68581/w64_wv-asm10_en_om_d-65.png "Page 66
Exceptional settings of Windows Firewall
66
When using the external interface, configure the exceptional settings of Windows Firewall.
Step 1
Click [Windows Firewall] on the Control Panel.
→The Windows Firewall window will be displayed.
Step 2
Click the [Exceptions] tab, and then click the [Add
Program...] button.
→The Add a Program window will be displayed.
Step 3
Click the [Browse...] button.
→The Browse window will be displayed.
Step 4
Select asm10live.exe and click the [Open] button.
Note:
When this...")
61 Auto numbering Step 1 Display the Group number page. (page 60) Step 2 Click the [Auto numbering] button. →The confirmation window will be displayed. Step 3 Click the [OK] button. →Group numbers will automatically be assigned in order of the displayed list. Step 4 Click the [Set] button. Export the group number list as a file Step 1 Display the Group number page. (page 60) Step 2 Click the [File export] button. →The Save As window will be displayed. Step 3 Enter the name of the file to be saved, and then click the [Save] button after specifying a destination. →The group number list will be saved as a file. Note: When a message window is displayed by clicking the [Save] button, refer to the Displayed messages and solutions section (page 73) and follow the instructions.
62 Step 1 Click the [External I/F] button. Step 2 Click the [Sequence number] tab. →The Sequence number page will be displayed. The following are descriptions about each item dis- played on the Sequence number page. [Auto numbering] button Sequence numbers will automatically be assigned in order of the displayed list.[File export] button The displayed list will be saved as a file in CSV format. [Set] button The edited settings will be saved and applied. Step 3 Click the desired sequence title, and then click the sequence number column respective to the clicked sequence title. →The clicked column will become editable. Step 4 Enter the desired sequence number. 1-99999 are available. Step 5 Click the [Set] button. Sequence number setting [Sequence number] Assign sequence numbers to the registered sequence names. Manual assignment
63 Auto numbering Step 1 Display the Sequence number page. (page 62) Step 2 Click the [Auto numbering] button. →The confirmation window will be displayed. Step 3 Click the [OK] button. →Sequence numbers will automatically be assigned in order of the displayed list. Step 4 Click the [Set] button. Export the Sequence number list as a file Step 1 Display the Sequence number page. (page 62) Step 2 Click the [File export] button. →The Save As window will be displayed. Step 3 Enter the name of the file to be saved, and then click the [Save] button after specifying a destination. →The sequence number list will be saved as a file. Note: When a message window is displayed by clicking the [Save] button, refer to the Displayed messages and solutions section (page 73) and follow the instructions.
64 Step 1 Click the [External I/F] button. Step 2 Click the [Camera number] tab. →The Camera number page will be displayed. The following are descriptions about each item dis- played on the Camera number page. [Auto numbering] button Camera numbers will automatically be assigned in order of the displayed list.[File export] button The displayed list will be saved as a file in CSV format. [Set] button The edited settings will be saved and applied. Step 3 Click the desired camera title, and then click the cam- era number column respective to the clicked camera title. →The clicked column will become editable. Step 4 Enter the desired camera number. 1-99999 are available. Step 5 Click the [Set] button. Camera number setting [Camera number] Assign camera numbers to the registered camera names. Manual assignment
65 Auto numbering Step 1 Display the Camera number page. (page 64) Step 2 Click the [Auto numbering] button. →The confirmation window will be displayed. Step 3 Click the [OK] button. →Camera numbers will automatically be assigned in order of the displayed list. Step 4 Click the [Set] button. Export the camera number list as a file Step 1 Display the Camera number page. (page 64) Step 2 Click the [File export] button. →The Save As window will be displayed. Step 3 Enter the name of the file to be saved, and then click the [Save] button after specifying a destination. →The camera number list will be saved as a file. Note: When a message window is displayed by clicking the [Save] button, refer to the Displayed messages and solutions section (page 73) and follow the instructions.
Exceptional settings of Windows Firewall 66 When using the external interface, configure the exceptional settings of Windows Firewall. Step 1 Click [Windows Firewall] on the Control Panel. →The Windows Firewall window will be displayed. Step 2 Click the [Exceptions] tab, and then click the [Add Program...] button. →The Add a Program window will be displayed. Step 3 Click the [Browse...] button. →The Browse window will be displayed. Step 4 Select asm10live.exe and click the [Open] button. Note: When this software has been installed without specifying the destination folder, asm10live.exe will be found in the following path. C:\Program Files\Panasonic\ASM10 Step 5 Select asm10live.exe, and click the [OK] button.
67 Step 6 Perform steps 2 - 5 in the same manner to add sqlservr.exe and sqlbrowser.exe. Note: When this software has been installed without specifying the destination folder, they will be found in the following path. asm10live.exe: C:\Program Files\Panasonic\ASM10 sqlservr.exe: C:\Program Files\Microsoft SQL Server\MSSQL.1 MSSQL\Binn sqlbrowser.exe: C:\Program Files\Microsoft SQL Server\90\Shared Step 7 Click the [Add Port…] button. →The Add a Port window will be displayed. Step 8 Click the [OK] button after designating a name (any character strings) and a port number, and selecting TCP. Enter the same number set for Port number on the Basic setup page of External I/F (page 59) for Port num- ber.
68 Troubleshooting Before asking for servicing, check the symptoms on the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution or if the problem is not described below. When using the setup software •The number of the registered recorders already reached the maximum possible number. Delete an unnecessary recorder and register a recorder newly. •The number of the registered encoders already reached the maximum possible number. Delete an unnecessary encoder and register an encoder newly. •The number of the registered groups already reached the maximum possible number (400 groups). Delete an unnecessary group and register a group newly. •The number of the registered sequences already reached the maximum possible number (10 sequences). Delete an unnecessary sequence and register a sequence newly. •Some of marks used for the camera title may not be displayed correctly. Example) When entering &&, it will be displayed as & in the tool tip. Reference pages Cause/solution 4, 23, 30 4, 31, 36 4, 46, 49 4, 50, 52 –Symptom Cannot register a recorder. Cannot register an encoder. Cannot register a group. Cannot register a sequence. The camera title displayed in the tool tip is different from the registered one. •The number of the registered cameras already reached the maximum possible number. Delete an unnecessary camera and register a camera newly. 4, 37, 43Cannot register the camera.
• This may occur when MPEG-4 images are used in the sequence display. Set the refresh interval of the camera to 1 second. Refer to the operating instructions of the camera in use for how to configure the settings. 69 When using the operation software Important: When the settings of the setup menu of the device are edited, download device information again. Otherwise, some functions may not work correctly. Refer to these operating instructions (PDF) for further information about download of the device information. Cause/solution • Isn’t OFF selected for MPEG-4 transmission on the setup menu of the camera in use? Select ON for MPEG-4 transmission. Refer to the operating instructions of the camera for how to configure the settings. • The settings for the device login user are not configured correctly. This software accesses each device and users can log in to each device as a device login user registered for each user. Check if the settings for the device login user are config- ured correctly. – 45 • The recorder is currently being configured using HDD DISK MENU, or the SD memory recording is being per- formed. Live images will be displayed when the configuration or the SD memory recording is completed. • It may be necessary to format the hard disk of the recorder. Check the status of the recorder by accessing directly to the recorder from the web browser. Reference pages – – Symptom No live image is displayed. • Connection between the recorder and the camera may be disconnected or a network trouble may be occurred. Check the connection. – –Live image is not being refreshed. No image is displayed when the sequence display is being performed.
70 Cause/solutionReference pagesSymptom • When load of the connected device is heavy, images to be displayed in the sequence display may be a black screen. This black screen may sometimes disappear by setting the dwell time of the sequence display longer. • A black screen may be displayed at a switching moment of the sequence display. This symptom can sometimes be solved by adjusting Sequence Changing Sleep Time. (The last image dis- played before switching to the next image in the sequence display will be kept on being displayed for the time set for Sequence Changing Sleep Time instead of a black screen.) The following are the descriptions of how to adjust Sequence Changing Sleep Time. 1. Confirm that this software is closed, and then open constants.xml using a text editor. When this soft- ware has been installed by the standard installation, constants.xml is in the following directory. C:\Program Files\Panasonic\ASM10\aplxml 2. Search SequenceChangingSleepTime. 3. Edit 0 part of value=0. The unit is ms. Example: When editing as value=1000, the sequence changing sleep time will be 1 second. 4. Overwrite and save the file after completing the edit. * Do not edit any other part than 0 part of value=0 of the file. – – No image is displayed when the sequence display is being performed. • When displaying images on a multi-screen, a black screen may be displayed instead of images of the sequence display. This black screen may sometimes disappear by setting the dwell time of the sequence display longer. –