Panasonic Pc Software Package Wv Asm10 Operating Instructions
Have a look at the manual Panasonic Pc Software Package Wv Asm10 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 36
36
Step 1
Display the Registered device window of the
encoder. (page 31)
Step 2
Select the encoder to be deleted.
Step 3
Click the [Delete…] button.
→The confirmation window will be displayed.
Step 4
Click the [OK] button.
→The device information will be deleted.
Note:
When a message window is displayed by clicking
the [Delete…] button, refer to the Displayed mes-
sages and solutions section on page 73 and follow
the instructions.
Delete the registered encoder [Basic setup]](http://img.usermanuals.tech/thumb/58/68581/w64_wv-asm10_en_om_d-35.png "Page 36
36
Step 1
Display the Registered device window of the
encoder. (page 31)
Step 2
Select the encoder to be deleted.
Step 3
Click the [Delete…] button.
→The confirmation window will be displayed.
Step 4
Click the [OK] button.
→The device information will be deleted.
Note:
When a message window is displayed by clicking
the [Delete…] button, refer to the Displayed mes-
sages and solutions section on page 73 and follow
the instructions.
Delete the registered encoder [Basic setup]")
![Page 37
37
Step 1
Click the [Device mng.] button.
→The Registered device window will be displayed.
Step 2
Click the [Camera] tab.
→The Registered device window of the camera will
be displayed.
The following are descriptions about each item dis-
played on the Registered device window of the cam-
era.
Registered device
Titles of the registered cameras, model numbers and
theirs addresses will be displayed in list form.
Number of device
Number of the registered cameras will be displayed.
[Add…] button
The Device...](http://img.usermanuals.tech/thumb/58/68581/w64_wv-asm10_en_om_d-36.png "Page 37
37
Step 1
Click the [Device mng.] button.
→The Registered device window will be displayed.
Step 2
Click the [Camera] tab.
→The Registered device window of the camera will
be displayed.
The following are descriptions about each item dis-
played on the Registered device window of the cam-
era.
Registered device
Titles of the registered cameras, model numbers and
theirs addresses will be displayed in list form.
Number of device
Number of the registered cameras will be displayed.
[Add…] button
The Device...")
![Page 38
38
[Start…] button
Camera information will be downloaded based on the
settings of Address, HTTP port number and Use a
proxy server.
Model no.
The model number contained in the downloaded cam-
era information will be displayed.
Unknown will be displayed when camera information
is not downloaded yet.
[Setup…] button
The Camera setup window will be displayed.
The [Setup...] button will be unavailable until camera
information is downloaded.
[Set] button
The edited settings will be saved and applied.
Step...](http://img.usermanuals.tech/thumb/58/68581/w64_wv-asm10_en_om_d-37.png "Page 38
38
[Start…] button
Camera information will be downloaded based on the
settings of Address, HTTP port number and Use a
proxy server.
Model no.
The model number contained in the downloaded cam-
era information will be displayed.
Unknown will be displayed when camera information
is not downloaded yet.
[Setup…] button
The Camera setup window will be displayed.
The [Setup...] button will be unavailable until camera
information is downloaded.
[Set] button
The edited settings will be saved and applied.
Step...")
![Page 39
39
Step 7
The message window will be displayed when down-
load process ended.
1. Click the [OK] button.
→The confirmation window will close.
2. Go to step 8.
1. Click the [OK] button on the error message window
and check if the information on the Device regis-
tration window has been edited correctly.
Note:
Check if the entered device information is correct.
When the information has been edited correctly,
the connected device or the version of the connect-
ed device may be not compatible with this...](http://img.usermanuals.tech/thumb/58/68581/w64_wv-asm10_en_om_d-38.png "Page 39
39
Step 7
The message window will be displayed when down-
load process ended.
1. Click the [OK] button.
→The confirmation window will close.
2. Go to step 8.
1. Click the [OK] button on the error message window
and check if the information on the Device regis-
tration window has been edited correctly.
Note:
Check if the entered device information is correct.
When the information has been edited correctly,
the connected device or the version of the connect-
ed device may be not compatible with this...")
![Page 41
41
Step 9
Click the [OK] button after completing the settings.
→The Camera setup window will close.
Notes:
•The edited settings will not be saved and applied
even when the Camera setup window is closed
by clicking the [OK] button.
To save and apply the settings, click the [Set] but-
ton on the Device registration window after clos-
ing the Camera setup window.
•When a message window is displayed by clicking
the [OK] button, refer to the Displayed messages
and solutions section on page 73 and follow the...](http://img.usermanuals.tech/thumb/58/68581/w64_wv-asm10_en_om_d-40.png "Page 41
41
Step 9
Click the [OK] button after completing the settings.
→The Camera setup window will close.
Notes:
•The edited settings will not be saved and applied
even when the Camera setup window is closed
by clicking the [OK] button.
To save and apply the settings, click the [Set] but-
ton on the Device registration window after clos-
ing the Camera setup window.
•When a message window is displayed by clicking
the [OK] button, refer to the Displayed messages
and solutions section on page 73 and follow the...")
![Page 42
42
Step 1
Display the Registered device window of the camera.
(page 37)
Step 2
Select the camera whose information is to be edited,
and then click the [Edit…] button.
→The Device registration window will be displayed.
Step 3
Click the [Set] button after editing the information.
Refer to the Register a camera [Basic setup] section
(page 37) for further information.
→The Device registration window will close and the
settings will be saved and applied.
Note:
When a message window is displayed by clicking...](http://img.usermanuals.tech/thumb/58/68581/w64_wv-asm10_en_om_d-41.png "Page 42
42
Step 1
Display the Registered device window of the camera.
(page 37)
Step 2
Select the camera whose information is to be edited,
and then click the [Edit…] button.
→The Device registration window will be displayed.
Step 3
Click the [Set] button after editing the information.
Refer to the Register a camera [Basic setup] section
(page 37) for further information.
→The Device registration window will close and the
settings will be saved and applied.
Note:
When a message window is displayed by clicking...")
![Page 43
43
Step 1
Display the Registered device window of the camera.
(page 37)
Step 2
Select the camera to be deleted.
Step 3
Click the [Delete…] button.
→The confirmation window will be displayed.
Step 4
Click the [OK] button.
→The device information will be deleted.
Note:
When a message window is displayed by clicking
the [Delete…] button, refer to the Displayed mes-
sages and solutions section on page 73 and follow
the instructions.
Delete the registered camera [Basic setup]](http://img.usermanuals.tech/thumb/58/68581/w64_wv-asm10_en_om_d-42.png "Page 43
43
Step 1
Display the Registered device window of the camera.
(page 37)
Step 2
Select the camera to be deleted.
Step 3
Click the [Delete…] button.
→The confirmation window will be displayed.
Step 4
Click the [OK] button.
→The device information will be deleted.
Note:
When a message window is displayed by clicking
the [Delete…] button, refer to the Displayed mes-
sages and solutions section on page 73 and follow
the instructions.
Delete the registered camera [Basic setup]")
![Page 44
44
Settings relating to the user management
Settings relating to the administrator [Administrator setup]
Click the [User mng.] button, and then click the [Administrator setup] tab to display the Administrator setup page.
Configure the settings relating to the administrator on this page.
Administrator name
Enter 4 - 14 alphanumeric characters for the adminis-
trator name.
Default:ADMIN
Password
Enter 4 - 8 alphanumeric characters for the password.
Default:12345
Important:
To enhance the security, change...](http://img.usermanuals.tech/thumb/58/68581/w64_wv-asm10_en_om_d-43.png "Page 44
44
Settings relating to the user management
Settings relating to the administrator [Administrator setup]
Click the [User mng.] button, and then click the [Administrator setup] tab to display the Administrator setup page.
Configure the settings relating to the administrator on this page.
Administrator name
Enter 4 - 14 alphanumeric characters for the adminis-
trator name.
Default:ADMIN
Password
Enter 4 - 8 alphanumeric characters for the password.
Default:12345
Important:
To enhance the security, change...")
![Page 45
45
Register users who can log in to the device [Device login user]
Click the [User mng.] button, and then click the [Device login user] tab to display the Device login user page.
Enter the user name and the password to be used to log in to the device.
When logging in to the device using the operation software, the user name and password determined on this page
will be required.
User name
Enter the user name used to log in to the device.
Enter 4 - 14 alphanumeric characters for the user
name....](http://img.usermanuals.tech/thumb/58/68581/w64_wv-asm10_en_om_d-44.png "Page 45
45
Register users who can log in to the device [Device login user]
Click the [User mng.] button, and then click the [Device login user] tab to display the Device login user page.
Enter the user name and the password to be used to log in to the device.
When logging in to the device using the operation software, the user name and password determined on this page
will be required.
User name
Enter the user name used to log in to the device.
Enter 4 - 14 alphanumeric characters for the user
name....")
![Page 46
46
Settings relating to the cameras
Contains settings relating to the camera group and the sequence display function.
Register a group [Group]
A combination of the screen pattern and the cameras can be registered as a group.
Up to 16 cameras can be registered as a group.
Up to 400 groups can be registered.
Register a group
Step 1
Click the [Camera] button.
Step 2
Click the [Group] tab.
→The Group page will be displayed.The following are descriptions about each item dis-
played on the Group page....](http://img.usermanuals.tech/thumb/58/68581/w64_wv-asm10_en_om_d-45.png "Page 46
46
Settings relating to the cameras
Contains settings relating to the camera group and the sequence display function.
Register a group [Group]
A combination of the screen pattern and the cameras can be registered as a group.
Up to 16 cameras can be registered as a group.
Up to 400 groups can be registered.
Register a group
Step 1
Click the [Camera] button.
Step 2
Click the [Group] tab.
→The Group page will be displayed.The following are descriptions about each item dis-
played on the Group page....")
41 Step 9 Click the [OK] button after completing the settings. →The Camera setup window will close. Notes: •The edited settings will not be saved and applied even when the Camera setup window is closed by clicking the [OK] button. To save and apply the settings, click the [Set] but- ton on the Device registration window after clos- ing the Camera setup window. •When a message window is displayed by clicking the [OK] button, refer to the Displayed messages and solutions section on page 73 and follow the instructions. Step 10 Click the [Set] button on the Device registration win- dow. →The Device registration window will close and the settings will be saved and applied. The registered camera will be displayed in the list of the registered devices. Note: When a message window is displayed by clicking the [Set] button, refer to the Displayed messages and solutions section on page 73 and follow the instructions.
42 Step 1 Display the Registered device window of the camera. (page 37) Step 2 Select the camera whose information is to be edited, and then click the [Edit…] button. →The Device registration window will be displayed. Step 3 Click the [Set] button after editing the information. Refer to the Register a camera [Basic setup] section (page 37) for further information. →The Device registration window will close and the settings will be saved and applied. Note: When a message window is displayed by clicking the [Set] button, refer to the Displayed messages and solutions section on page 73 and follow the instructions. Edit the registered camera information [Basic setup]
43 Step 1 Display the Registered device window of the camera. (page 37) Step 2 Select the camera to be deleted. Step 3 Click the [Delete…] button. →The confirmation window will be displayed. Step 4 Click the [OK] button. →The device information will be deleted. Note: When a message window is displayed by clicking the [Delete…] button, refer to the Displayed mes- sages and solutions section on page 73 and follow the instructions. Delete the registered camera [Basic setup]
44 Settings relating to the user management Settings relating to the administrator [Administrator setup] Click the [User mng.] button, and then click the [Administrator setup] tab to display the Administrator setup page. Configure the settings relating to the administrator on this page. Administrator name Enter 4 - 14 alphanumeric characters for the adminis- trator name. Default:ADMIN Password Enter 4 - 8 alphanumeric characters for the password. Default:12345 Important: To enhance the security, change the administrator password periodically. Level The user level will be displayed. The user level of the administrator is Administrator and it is impossible to change. Login user(To device) The user name used to log in to the device will be dis- played. The displayed user name is of user’s who is set as User0 on the Device login user page (page 45). It is impossible to change the device login name of the administrator on this page. Default:ADMINRestrict operable camera All cameras are available. will be displayed. It is impossible to change the operable cameras for the administrator. [Set] button The edited settings will be saved and applied. Note: When a message window is displayed by clicking the [Set] button, refer to the Displayed messages and solutions section on page 73 and follow the instructions.
45 Register users who can log in to the device [Device login user] Click the [User mng.] button, and then click the [Device login user] tab to display the Device login user page. Enter the user name and the password to be used to log in to the device. When logging in to the device using the operation software, the user name and password determined on this page will be required. User name Enter the user name used to log in to the device. Enter 4 - 14 alphanumeric characters for the user name. Default:ADMIN (User0) Password Enter the password. The entered password will be displayed as *. Enter 4 - 8 alphanumeric characters for the password. Default:12345 (User0) Important: •Enter the user name and the password registered in the device. When unregistered user name and password are entered, operation may not be performed correctly. •The settings configured for User0 will not be applied to this software by clicking the [Set] button. To apply the settings for User0, restart the soft- ware. Notes: •User0 is exclusive for the administrator. It is impossible to delete User0. •When logging in to the HD300 as User0, log in with the user name ADMIN, not with the set user name. Use the password set for User0. [Set] button The edited settings will be saved and applied. Note: When a message window is displayed by clicking the [Set] button, refer to the Displayed messages and solutions section on page 73 and follow the instructions.
46 Settings relating to the cameras Contains settings relating to the camera group and the sequence display function. Register a group [Group] A combination of the screen pattern and the cameras can be registered as a group. Up to 16 cameras can be registered as a group. Up to 400 groups can be registered. Register a group Step 1 Click the [Camera] button. Step 2 Click the [Group] tab. →The Group page will be displayed.The following are descriptions about each item dis- played on the Group page. Registered group The registered groups will be displayed in list form. [Add…] button The Group regist. window will be displayed. [Edit…] button The Group regist. window of the group selected from the list will be displayed. [Delete…] button The group selected from the list will be deleted. Number of group Number of the registered groups will be displayed.Step 3 Click the [Add…] button. →The Group regist. window will be displayed.
47
Note:
The [Add…] button will become unavailable when
reached the maximum number of the group regis-
tration (400 groups).
The following are descriptions about each item dis-
played on the Group regist. window.
Group title
Enter the group title.
When editing the title, enter up to 16 characters.
The following characters are unavailable for the group
title.
! $ % ’< = > @ [ ] ^ _ ` { | } ~
The group title already in use cannot be entered.
Camera
The registered devices will be displayed in the tree
view.
Number of camera
Select the screen pattern to determine the number of
cameras.
The icons indicate the screen pattern used for the
group display as follows.
Icon Description
Displays the group on a 1-screen.
Displays the group on a 4-screen.
Displays the group on a 6-screen.
Displays the group on a 9-screen.
Displays the group on a 16-screen.
Default:4-screen
Group layout
Images from the cameras registered as a group will be
displayed on the selected screen pattern. Drag and
drop the recorder icon, the encoder icon or the camera
icon displayed in the tree view onto the desired area.
When the cameras are registered, the device title and
the camera title will be displayed in the areas.
Notes:
•When the recorder icon or the encoder icon is
dragged and dropped, the camera channels of the
recorder or the encoder will be assigned automati-
cally from camera channel 1 in order.•When the characters of the device title and the
camera title are not fully displayed, the tool tip help
will automatically be displayed and show the title
fully.
Example:ABCDEFGHIJKLMNOP →
ABCDEFGHIJKLMN...
•When displaying images from a camera that is not
registered in the recorder, -- will be displayed as
a device title in the group layout area.
[Clear] button
The settings of Group layout will be cleared.
[Set] button
The edited settings will be saved and applied.
Step 4
Click the [Set] button after editing the information.
→The Group regist. window will close and the set-
tings will be saved and applied.
The group will be displayed in the list of the regis-
tered group.
Important:
The camera already registered in the group cannot
added to the same group.
Note:
When a message window is displayed by clicking
the [Set] button, refer to the Displayed messages
and solutions section on page 73 and follow the
instructions.
48 Edit the group information Step 1 Display the Group page. (page 46) Step 2 Select the group whose information is to be edited, and then click the [Edit…] button. →The Group regist. window will be displayed. Step 3 Click the [Set] button after editing the information. Refer to the Register a group section (page 46) for further information. →The Group regist. window will close and the set- tings will be saved and applied. Note: When a message window is displayed by clicking the [Set] button, refer to the Displayed messages and solutions section on page 73 and follow the instructions.
49 Delete the group Step 1 Display the Group page. (page 46) Step 2 Select the group to be deleted. Step 3 Click the [Delete…] button. →The confirmation window will be displayed. Step 4 Click the [OK] button. Notes: •When the group set as the default screen is delet- ed, -- will be displayed for the setting of Default screen on the Live window page. In this case, a black screen will be displayed in the image display area of the operation window just after login. •When a message window is displayed by clicking the [Delete…] button, refer to the Displayed mes- sages and solutions section on page 73 and follow the instructions.
50 Register a sequence [Sequence] The registered groups can be registered in a sequence and it is possible to display images from cameras registered in the groups sequentially. Up to 64 groups can be registered in a sequence. Up to 10 sequences can be registered. Register a sequence Step 1 Click the [Camera] button. Step 2 Click the [Sequence] tab. →The Sequence page will be displayed.The following are descriptions about each item dis- played on the Sequence page. Registered sequence The registered sequences will be displayed in list form. [Add…] button The Sequence regist. window will be displayed. [Edit…] button The Sequence regist. window of the sequence selected from the list will be displayed. [Delete…] button The sequence selected from the list will be deleted. Number of sequence Number of the registered sequences will be displayed. Step 3 Click the [Add…] button. →The Sequence regist. window will be displayed.