Panasonic Pc Software Package Wv Asm10 Operating Instructions

71
• This may occur when trying to display images directly
from the cameras with the same address when
Multicast is selected for Transmission type on the
setup menu of the camera.
Set different multicast addresses for each camera.
– – • This may occur due to the display adapter and driver
combination.
When this occurred, update the driver of the display
adapter to the latest version first.
If updating the driver does not solve the problem, adjust
the hardware acceleration as follows.
The following...

72
Cause/solutionReference 
pagesSymptom
• The value set for Max bit rate (per 1 client) on the setup
menu of the camera that transmits MPEG-4 images may
not be appropriate for the CPU performance of the PC in
use.
Check the recommended settings of the camera when
operating MPEG-4 images.
• It may be possible that load of the connected device is
heavy.
In this case, it may sometimes be improved by reducing
load of the connected device.
9
–
• When this software is running, the PC may sometimes
not go into...

73
Displayed messages and solutions
When starting the setup software
When a message window is displayed in the process of the startup, refer to the following to solve the problem.
•The setup software cannot be started when the operation software is
open.
Click the [OK] button, and then start the setup software after closing the
operation software.
•The hardware key is not inserted into the USB port of the PC.
Start the setup software after inserting the hardware key into the USB
port.
SolutionMessage
It...

74
When the [OK] button on the login window is clicked
When a message window is displayed by clicking the [OK] button on the login window, refer to the following to solve
the problem.
When the [Set] button is clicked
When a message window is displayed by clicking the [Set] button, refer to the following to solve the problem.•The entered user name or password is incorrect.
Enter the correct user name and password. When failed to log in again,
contact the administrator.
SolutionMessage
Failed to log in....

75
When the [Start…] button on the setup page of Device mng. is clicked
When a message window is displayed by clicking the [Start…] button on the setup page of Device mng., refer to
the following to solve the problem.
MessageSolution
•This message will be displayed when failed to download the device
information.
Try to download the device  information again after checking the con-
nection to the device and the settings such as Address, HTTP port
number, Use a proxy server, etc.
•This message will be...

76
•This message will be displayed when trying to download encoder infor-
mation from the model that is incompatible with this software, or when
unauthenticated by the user authentication function to connect to the
encoder.
Check if the encoder in use is the model compatible with this software,
or Device login user.
•This message will be displayed when trying to download encoder infor-
mation from the model whose version is firmware version is incompati-
ble with this software.
Check the firmware version...

77
When an error occurred
When a message window is displayed at an error occurrence, refer to the following to solve the problem.
•This message will be displayed when a critical error occurred.
Please restart the operating system. When this message is displayed
after the restart, please reinstall the software.
•This message will be displayed when the required data was not found
in the database.
Import the backup file of the setup data.
SolutionMessage
Please restart the operating
system. When this...

78
When determined the entered number on the setting pages of External I/F
When a message window is displayed by determining the entered number (group number, sequence number, cam-
era number), refer to the following to solve the problem.
• This message will be displayed when trying to determine the values on
the setting page of External I/F even though the entered character or
group number is invalid, or the entered group number is already in use.
The setup item for which invalid value entered will be...

79
dispCtl.cgi
Command list of external interface
Command Parameter Value Description Example
SCREEN
POS1,,,POSn
n:Display area
(1 - 16)n:Number of area on a
multi-screen
(1,4,6,9,16)Designate a multi-screen
pattern.
* Use command POS
respective to the desig-
nated multi-screen pat-
tern./cgi-bin/dispCtl?SCREEN=
1&POS1=CAM1
(Display on a 1-screen.)
/cgi-bin/dispCtl?SCREEN=4
&POS1=CAM1&POS2=CAM2
&POS3=CAM3&POS4=CAM4
(Display on a 4-screen.)
/cgi-bin/dispCtl?SCREEN=9
&POS1=CAM1&POS2=CAM2...

80
Command Parameter Value Description Example
dispCtl.cgi
sysCtl.cgi
appCtl.cgiCMDSEQstart Start the sequence dis-
play.
* Use together with para-
meter GSEQ./cgi-bin/dispCtl?GSEQ=5
&CMDSEQ=start (Start display-
ing the sequence display regis-
tered as sequence number 5.)
pause
restartPause the current
sequence display.
* Cannot use with the other
parameters.
Resume the paused
sequence display.
* Cannot use with the other
parameters./cgi-bin/dispCtl?CMDSEQ=
pause (Pause the current
sequence display.)...