Panasonic Pc Software Package Wv Asm10 Operating Instructions
Here you can view all the pages of manual Panasonic Pc Software Package Wv Asm10 Operating Instructions. The Panasonic manuals for Software are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
31
Register an encoder [Basic setup]
Step 1
Click the [Device mng.] button.
→The Registered device window will be displayed.
Step 2
Click the [Encoder] tab.
→The Registered device window of the encoder will
be displayed.
The following are descriptions about each item dis-
played on the Registered device window of the
encoder.
Registered device
Titles of the registered encoders, model numbers and
theirs addresses will be displayed in list form.
Number of device
Number of the registered encoders will be...](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-30.png "Page 31
31
Register an encoder [Basic setup]
Step 1
Click the [Device mng.] button.
→The Registered device window will be displayed.
Step 2
Click the [Encoder] tab.
→The Registered device window of the encoder will
be displayed.
The following are descriptions about each item dis-
played on the Registered device window of the
encoder.
Registered device
Titles of the registered encoders, model numbers and
theirs addresses will be displayed in list form.
Number of device
Number of the registered encoders will be...")
31 Register an encoder [Basic setup] Step 1 Click the [Device mng.] button. →The Registered device window will be displayed. Step 2 Click the [Encoder] tab. →The Registered device window of the encoder will be displayed. The following are descriptions about each item dis- played on the Registered device window of the encoder. Registered device Titles of the registered encoders, model numbers and theirs addresses will be displayed in list form. Number of device Number of the registered encoders will be...
Page 32
![Page 32
32
Note:
The proxy server address can be set on the [Basic
setup] tab of the Comm page (page 54).
[Start…] button
Encoder information will be downloaded based on the
settings of Address, HTTP port number and Use a
proxy server.
Model no.
The model number contained in the downloaded
encoder information will be displayed.
Unknown will be displayed when encoder information
is not downloaded yet.
Device title
Enter the encoder title.
Enter up to 16 characters.
The following characters are unavailable for...](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-31.png "Page 32
32
Note:
The proxy server address can be set on the [Basic
setup] tab of the Comm page (page 54).
[Start…] button
Encoder information will be downloaded based on the
settings of Address, HTTP port number and Use a
proxy server.
Model no.
The model number contained in the downloaded
encoder information will be displayed.
Unknown will be displayed when encoder information
is not downloaded yet.
Device title
Enter the encoder title.
Enter up to 16 characters.
The following characters are unavailable for...")
32 Note: The proxy server address can be set on the [Basic setup] tab of the Comm page (page 54). [Start…] button Encoder information will be downloaded based on the settings of Address, HTTP port number and Use a proxy server. Model no. The model number contained in the downloaded encoder information will be displayed. Unknown will be displayed when encoder information is not downloaded yet. Device title Enter the encoder title. Enter up to 16 characters. The following characters are unavailable for...
Page 33
![Page 33
33
Step 7
The message window will be displayed when down-
load process ended.
1. Click the [OK] button.
→The confirmation window will close.
2. Go to step 8.
1. Click the [OK] button on the error message window
and check if the information on the Device regis-
tration window has been edited correctly.
Note:
Check if the entered device information is correct.
When the information has been edited correctly,
the connected device or the version of the connect-
ed device may be not compatible with this...](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-32.png "Page 33
33
Step 7
The message window will be displayed when down-
load process ended.
1. Click the [OK] button.
→The confirmation window will close.
2. Go to step 8.
1. Click the [OK] button on the error message window
and check if the information on the Device regis-
tration window has been edited correctly.
Note:
Check if the entered device information is correct.
When the information has been edited correctly,
the connected device or the version of the connect-
ed device may be not compatible with this...")
33 Step 7 The message window will be displayed when down- load process ended. 1. Click the [OK] button. →The confirmation window will close. 2. Go to step 8. 1. Click the [OK] button on the error message window and check if the information on the Device regis- tration window has been edited correctly. Note: Check if the entered device information is correct. When the information has been edited correctly, the connected device or the version of the connect- ed device may be not compatible with this...
Page 34
34 Type Select the camera type. PTZ camera:Cameras with the panning, tilting and zooming functions. Fixed camera:Cameras without the panning and tilt- ing functions. Default:PTZ camera Compression Select the image compression type. M-JPEG:Live images will be displayed in the M-JPEG format. MPEG-4:Live images will be displayed in the MPEG-4 format. Default:MPEG-4 Refresh interval (JPEG) Determine the refresh interval of the camera (number of images to be refreshed per second). The refresh interval...
Page 35
![Page 35
35
Step 1
Display the Registered device window of the
encoder. (page 31)
Step 2
Select the encoder whose information is to be edited,
and then click the [Edit…] button.
→The Device registration window will be displayed.
Step 3
Click the [Set] button after editing the information.
Refer to the Register an encoder [Basic setup] sec-
tion (page 31) for further information.
→The Device registration window will close and the
settings will be saved and applied.
Note:
When a message window is displayed by...](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-34.png "Page 35
35
Step 1
Display the Registered device window of the
encoder. (page 31)
Step 2
Select the encoder whose information is to be edited,
and then click the [Edit…] button.
→The Device registration window will be displayed.
Step 3
Click the [Set] button after editing the information.
Refer to the Register an encoder [Basic setup] sec-
tion (page 31) for further information.
→The Device registration window will close and the
settings will be saved and applied.
Note:
When a message window is displayed by...")
35 Step 1 Display the Registered device window of the encoder. (page 31) Step 2 Select the encoder whose information is to be edited, and then click the [Edit…] button. →The Device registration window will be displayed. Step 3 Click the [Set] button after editing the information. Refer to the Register an encoder [Basic setup] sec- tion (page 31) for further information. →The Device registration window will close and the settings will be saved and applied. Note: When a message window is displayed by...
Page 36
![Page 36
36
Step 1
Display the Registered device window of the
encoder. (page 31)
Step 2
Select the encoder to be deleted.
Step 3
Click the [Delete…] button.
→The confirmation window will be displayed.
Step 4
Click the [OK] button.
→The device information will be deleted.
Note:
When a message window is displayed by clicking
the [Delete…] button, refer to the Displayed mes-
sages and solutions section on page 73 and follow
the instructions.
Delete the registered encoder [Basic setup]](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-35.png "Page 36
36
Step 1
Display the Registered device window of the
encoder. (page 31)
Step 2
Select the encoder to be deleted.
Step 3
Click the [Delete…] button.
→The confirmation window will be displayed.
Step 4
Click the [OK] button.
→The device information will be deleted.
Note:
When a message window is displayed by clicking
the [Delete…] button, refer to the Displayed mes-
sages and solutions section on page 73 and follow
the instructions.
Delete the registered encoder [Basic setup]")
36 Step 1 Display the Registered device window of the encoder. (page 31) Step 2 Select the encoder to be deleted. Step 3 Click the [Delete…] button. →The confirmation window will be displayed. Step 4 Click the [OK] button. →The device information will be deleted. Note: When a message window is displayed by clicking the [Delete…] button, refer to the Displayed mes- sages and solutions section on page 73 and follow the instructions. Delete the registered encoder [Basic setup]
Page 37
![Page 37
37
Step 1
Click the [Device mng.] button.
→The Registered device window will be displayed.
Step 2
Click the [Camera] tab.
→The Registered device window of the camera will
be displayed.
The following are descriptions about each item dis-
played on the Registered device window of the cam-
era.
Registered device
Titles of the registered cameras, model numbers and
theirs addresses will be displayed in list form.
Number of device
Number of the registered cameras will be displayed.
[Add…] button
The Device...](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-36.png "Page 37
37
Step 1
Click the [Device mng.] button.
→The Registered device window will be displayed.
Step 2
Click the [Camera] tab.
→The Registered device window of the camera will
be displayed.
The following are descriptions about each item dis-
played on the Registered device window of the cam-
era.
Registered device
Titles of the registered cameras, model numbers and
theirs addresses will be displayed in list form.
Number of device
Number of the registered cameras will be displayed.
[Add…] button
The Device...")
37 Step 1 Click the [Device mng.] button. →The Registered device window will be displayed. Step 2 Click the [Camera] tab. →The Registered device window of the camera will be displayed. The following are descriptions about each item dis- played on the Registered device window of the cam- era. Registered device Titles of the registered cameras, model numbers and theirs addresses will be displayed in list form. Number of device Number of the registered cameras will be displayed. [Add…] button The Device...
Page 38
![Page 38
38
[Start…] button
Camera information will be downloaded based on the
settings of Address, HTTP port number and Use a
proxy server.
Model no.
The model number contained in the downloaded cam-
era information will be displayed.
Unknown will be displayed when camera information
is not downloaded yet.
[Setup…] button
The Camera setup window will be displayed.
The [Setup...] button will be unavailable until camera
information is downloaded.
[Set] button
The edited settings will be saved and applied.
Step...](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-37.png "Page 38
38
[Start…] button
Camera information will be downloaded based on the
settings of Address, HTTP port number and Use a
proxy server.
Model no.
The model number contained in the downloaded cam-
era information will be displayed.
Unknown will be displayed when camera information
is not downloaded yet.
[Setup…] button
The Camera setup window will be displayed.
The [Setup...] button will be unavailable until camera
information is downloaded.
[Set] button
The edited settings will be saved and applied.
Step...")
38 [Start…] button Camera information will be downloaded based on the settings of Address, HTTP port number and Use a proxy server. Model no. The model number contained in the downloaded cam- era information will be displayed. Unknown will be displayed when camera information is not downloaded yet. [Setup…] button The Camera setup window will be displayed. The [Setup...] button will be unavailable until camera information is downloaded. [Set] button The edited settings will be saved and applied. Step...
Page 39
![Page 39
39
Step 7
The message window will be displayed when down-
load process ended.
1. Click the [OK] button.
→The confirmation window will close.
2. Go to step 8.
1. Click the [OK] button on the error message window
and check if the information on the Device regis-
tration window has been edited correctly.
Note:
Check if the entered device information is correct.
When the information has been edited correctly,
the connected device or the version of the connect-
ed device may be not compatible with this...](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-38.png "Page 39
39
Step 7
The message window will be displayed when down-
load process ended.
1. Click the [OK] button.
→The confirmation window will close.
2. Go to step 8.
1. Click the [OK] button on the error message window
and check if the information on the Device regis-
tration window has been edited correctly.
Note:
Check if the entered device information is correct.
When the information has been edited correctly,
the connected device or the version of the connect-
ed device may be not compatible with this...")
39 Step 7 The message window will be displayed when down- load process ended. 1. Click the [OK] button. →The confirmation window will close. 2. Go to step 8. 1. Click the [OK] button on the error message window and check if the information on the Device regis- tration window has been edited correctly. Note: Check if the entered device information is correct. When the information has been edited correctly, the connected device or the version of the connect- ed device may be not compatible with this...
Page 40
40 Compression Select the image compression type. Only the MPEG-4 cameras can be selected. M-JPEG:Live images will be displayed in the M-JPEG format. MPEG-4:Live images will be displayed in the MPEG-4 format. Default: Model no. Compression WV-NF284 MPEG-4 WV-NP24x MPEG-4 WV-NP100x MPEG-4 WV-NS202 MPEG-4 WV-NS202A MPEG-4 WV-NW484 MPEG-4 WV-NP472 M-JPEG (cannot be changed) WV-NS32x M-JPEG (cannot be changed) WV-NW47x M-JPEG (cannot be changed) Resolution (JPEG) Select the resolution from the following....