Panasonic Pc Software Package Wv Asm10 Operating Instructions
Here you can view all the pages of manual Panasonic Pc Software Package Wv Asm10 Operating Instructions. The Panasonic manuals for Software are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
51
Note:
The [Add…] button will become unavailable when
reached the maximum number of the sequence
registration (10 sequences).
The following are descriptions about each item dis-
played on the Sequence regist. window.
Sequence title
Enter the sequence title. When editing the title, enter
up to 16 characters. The following characters are
unavailable for the sequence title.
! $ % ’< = > @ [ ] ^ _ ` { | } ~
The sequence title already in use cannot be entered.
Registered group
The groups that can be...](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-50.png "Page 51
51
Note:
The [Add…] button will become unavailable when
reached the maximum number of the sequence
registration (10 sequences).
The following are descriptions about each item dis-
played on the Sequence regist. window.
Sequence title
Enter the sequence title. When editing the title, enter
up to 16 characters. The following characters are
unavailable for the sequence title.
! $ % ’< = > @ [ ] ^ _ ` { | } ~
The sequence title already in use cannot be entered.
Registered group
The groups that can be...")
51
Note:
The [Add…] button will become unavailable when
reached the maximum number of the sequence
registration (10 sequences).
The following are descriptions about each item dis-
played on the Sequence regist. window.
Sequence title
Enter the sequence title. When editing the title, enter
up to 16 characters. The following characters are
unavailable for the sequence title.
! $ % ’< = > @ [ ] ^ _ ` { | } ~
The sequence title already in use cannot be entered.
Registered group
The groups that can be...
Page 52
![Page 52
52
Edit the sequence
Step 1
Display the Sequence page. (page 50)
Step 2
Select the sequence whose information is to be edited,
and then click the [Edit…] button.
→The Sequence regist. window will be displayed.
Step 3
Click the [Set] button after editing the information.
Refer to the Register a sequence section (page
50) for further information.
→The Sequence regist. window will close and the
settings will be saved and applied.
Note:
When a message window is displayed by clicking
the [Set] button, refer...](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-51.png "Page 52
52
Edit the sequence
Step 1
Display the Sequence page. (page 50)
Step 2
Select the sequence whose information is to be edited,
and then click the [Edit…] button.
→The Sequence regist. window will be displayed.
Step 3
Click the [Set] button after editing the information.
Refer to the Register a sequence section (page
50) for further information.
→The Sequence regist. window will close and the
settings will be saved and applied.
Note:
When a message window is displayed by clicking
the [Set] button, refer...")
52 Edit the sequence Step 1 Display the Sequence page. (page 50) Step 2 Select the sequence whose information is to be edited, and then click the [Edit…] button. →The Sequence regist. window will be displayed. Step 3 Click the [Set] button after editing the information. Refer to the Register a sequence section (page 50) for further information. →The Sequence regist. window will close and the settings will be saved and applied. Note: When a message window is displayed by clicking the [Set] button, refer...
Page 53
![Page 53
53
Settings relating to the window
The settings relating to the live window can be configured.
Use the live window [Live window]
Click the [Window] button to display the Live window page.
Default screen
Select Group or Sequence to determine how to dis-
play live images when starting the operation software.
Group:The group display will start to display live
images just after login.
Sequence:The sequence display will start to display
live images just after login.
Default:Group
It is possible to select...](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-52.png "Page 53
53
Settings relating to the window
The settings relating to the live window can be configured.
Use the live window [Live window]
Click the [Window] button to display the Live window page.
Default screen
Select Group or Sequence to determine how to dis-
play live images when starting the operation software.
Group:The group display will start to display live
images just after login.
Sequence:The sequence display will start to display
live images just after login.
Default:Group
It is possible to select...")
53 Settings relating to the window The settings relating to the live window can be configured. Use the live window [Live window] Click the [Window] button to display the Live window page. Default screen Select Group or Sequence to determine how to dis- play live images when starting the operation software. Group:The group display will start to display live images just after login. Sequence:The sequence display will start to display live images just after login. Default:Group It is possible to select...
Page 54
![Page 54
54
Settings relating to the communication
Configure the settings relating to the communication required to use this software.
Network settings [Basic setup]
Click the [Comm] button to display the Basic setup page.
Configure the settings of Proxy address and Proxy port number.
Proxy address
Enter the IP address of the proxy server.
Enter up to 255 alphanumeric characters.
Proxy port number
Enter the port number of the proxy server.
Enter a number from 1 to 65535.
[Set] button
The edited settings will...](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-53.png "Page 54
54
Settings relating to the communication
Configure the settings relating to the communication required to use this software.
Network settings [Basic setup]
Click the [Comm] button to display the Basic setup page.
Configure the settings of Proxy address and Proxy port number.
Proxy address
Enter the IP address of the proxy server.
Enter up to 255 alphanumeric characters.
Proxy port number
Enter the port number of the proxy server.
Enter a number from 1 to 65535.
[Set] button
The edited settings will...")
54 Settings relating to the communication Configure the settings relating to the communication required to use this software. Network settings [Basic setup] Click the [Comm] button to display the Basic setup page. Configure the settings of Proxy address and Proxy port number. Proxy address Enter the IP address of the proxy server. Enter up to 255 alphanumeric characters. Proxy port number Enter the port number of the proxy server. Enter a number from 1 to 65535. [Set] button The edited settings will...
Page 55
![Page 55
55
Settings relating to maintenance
The following can be performed on the Maintenance page.
•Display the version of this software
•Save/load/initialize the setup file of the setup software
Display the version of this software [Version information]
Click the [Maintenance] button, and then click the [Version information] tab to display the Version information page.
Software version
Version of this software will be displayed.](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-54.png "Page 55
55
Settings relating to maintenance
The following can be performed on the Maintenance page.
•Display the version of this software
•Save/load/initialize the setup file of the setup software
Display the version of this software [Version information]
Click the [Maintenance] button, and then click the [Version information] tab to display the Version information page.
Software version
Version of this software will be displayed.")
55 Settings relating to maintenance The following can be performed on the Maintenance page. •Display the version of this software •Save/load/initialize the setup file of the setup software Display the version of this software [Version information] Click the [Maintenance] button, and then click the [Version information] tab to display the Version information page. Software version Version of this software will be displayed.
Page 56
![Page 56
56
Save/load/initialize the setup data [Save/Load]
The setup data can be saved/loaded/initialized.
Save the setup data as a backup
Important:
Back up the setup data periodically by copying it onto an external hard disk drive or other storage medium. When
the hard disk drive on the PC in use is damaged, it may be impossible to recover the setup data.
Step 1
Click the [Maintenance] button.
Step 2
Click the [Save/Load] tab.
→The Save/Load page will be displayed.The following are descriptions about each item...](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-55.png "Page 56
56
Save/load/initialize the setup data [Save/Load]
The setup data can be saved/loaded/initialized.
Save the setup data as a backup
Important:
Back up the setup data periodically by copying it onto an external hard disk drive or other storage medium. When
the hard disk drive on the PC in use is damaged, it may be impossible to recover the setup data.
Step 1
Click the [Maintenance] button.
Step 2
Click the [Save/Load] tab.
→The Save/Load page will be displayed.The following are descriptions about each item...")
56 Save/load/initialize the setup data [Save/Load] The setup data can be saved/loaded/initialized. Save the setup data as a backup Important: Back up the setup data periodically by copying it onto an external hard disk drive or other storage medium. When the hard disk drive on the PC in use is damaged, it may be impossible to recover the setup data. Step 1 Click the [Maintenance] button. Step 2 Click the [Save/Load] tab. →The Save/Load page will be displayed.The following are descriptions about each item...
Page 57
![Page 57
57
Note:
When a message window is displayed by clicking
the [Save] button, refer to the Displayed messages
and solutions section on page 73 and follow the
instructions.Step 5
Click the [OK] button on the confirmation window.
→The Save/Load page will be displayed again.
Load the setup file
Important:
•When loading of the setup file starts, all the setup data of this software will be overwritten.
•When loading of the setup file is completed, the setup software will restart.
Step 1
Display the Save/Load...](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-56.png "Page 57
57
Note:
When a message window is displayed by clicking
the [Save] button, refer to the Displayed messages
and solutions section on page 73 and follow the
instructions.Step 5
Click the [OK] button on the confirmation window.
→The Save/Load page will be displayed again.
Load the setup file
Important:
•When loading of the setup file starts, all the setup data of this software will be overwritten.
•When loading of the setup file is completed, the setup software will restart.
Step 1
Display the Save/Load...")
57 Note: When a message window is displayed by clicking the [Save] button, refer to the Displayed messages and solutions section on page 73 and follow the instructions.Step 5 Click the [OK] button on the confirmation window. →The Save/Load page will be displayed again. Load the setup file Important: •When loading of the setup file starts, all the setup data of this software will be overwritten. •When loading of the setup file is completed, the setup software will restart. Step 1 Display the Save/Load...
Page 58
![Page 58
58
Initialize the setup file
Important:
•When initialization of the setup file starts, all the setup data of this software will be initialized. It is recommended
to back up the setup file before initializing the setup file.
•When initialization of the setup file is completed, the setup software will restart.
Step 1
Display the Save/Load page. (page 56)
Step 2
Click the [Execute…] button.
→The initialization start confirmation window will be
displayed.
Step 3
Click the [OK] button.
→Initialization of...](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-57.png "Page 58
58
Initialize the setup file
Important:
•When initialization of the setup file starts, all the setup data of this software will be initialized. It is recommended
to back up the setup file before initializing the setup file.
•When initialization of the setup file is completed, the setup software will restart.
Step 1
Display the Save/Load page. (page 56)
Step 2
Click the [Execute…] button.
→The initialization start confirmation window will be
displayed.
Step 3
Click the [OK] button.
→Initialization of...")
58 Initialize the setup file Important: •When initialization of the setup file starts, all the setup data of this software will be initialized. It is recommended to back up the setup file before initializing the setup file. •When initialization of the setup file is completed, the setup software will restart. Step 1 Display the Save/Load page. (page 56) Step 2 Click the [Execute…] button. →The initialization start confirmation window will be displayed. Step 3 Click the [OK] button. →Initialization of...
Page 59
![Page 59
Settings relating to the external interface
59
When controlling functions of this software using an external interface, it is necessary to configure the settings relat-
ing to the external interface such as, ON/OFF for use of the external interface, the group number setting and the
sequence number setting.
External interface settings [Basic setup]
Click the [External I/F] button, and then click the [Basic setup] tab to display the Basic setup page.
External I/F
Select ON or OFF to determine whether or...](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-58.png "Page 59
Settings relating to the external interface
59
When controlling functions of this software using an external interface, it is necessary to configure the settings relat-
ing to the external interface such as, ON/OFF for use of the external interface, the group number setting and the
sequence number setting.
External interface settings [Basic setup]
Click the [External I/F] button, and then click the [Basic setup] tab to display the Basic setup page.
External I/F
Select ON or OFF to determine whether or...")
Settings relating to the external interface 59 When controlling functions of this software using an external interface, it is necessary to configure the settings relat- ing to the external interface such as, ON/OFF for use of the external interface, the group number setting and the sequence number setting. External interface settings [Basic setup] Click the [External I/F] button, and then click the [Basic setup] tab to display the Basic setup page. External I/F Select ON or OFF to determine whether or...
Page 60
![Page 60
60
Step 1
Click the [External I/F] button.
Step 2
Click the [Group number] tab.
→The Group number page will be displayed.
The following are descriptions about each item dis-
played on the Group number page.
[Auto numbering] button
Group numbers will automatically be assigned in order
of the displayed list.[File export] button
The displayed list will be saved as a file in CSV format.
[Set] button
The edited settings will be saved and applied.
Step 3
Click the desired group title, and then click the...](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-59.png "Page 60
60
Step 1
Click the [External I/F] button.
Step 2
Click the [Group number] tab.
→The Group number page will be displayed.
The following are descriptions about each item dis-
played on the Group number page.
[Auto numbering] button
Group numbers will automatically be assigned in order
of the displayed list.[File export] button
The displayed list will be saved as a file in CSV format.
[Set] button
The edited settings will be saved and applied.
Step 3
Click the desired group title, and then click the...")
60 Step 1 Click the [External I/F] button. Step 2 Click the [Group number] tab. →The Group number page will be displayed. The following are descriptions about each item dis- played on the Group number page. [Auto numbering] button Group numbers will automatically be assigned in order of the displayed list.[File export] button The displayed list will be saved as a file in CSV format. [Set] button The edited settings will be saved and applied. Step 3 Click the desired group title, and then click the...