Panasonic Pc Software Package Wv Asm10 Operating Instructions
Here you can view all the pages of manual Panasonic Pc Software Package Wv Asm10 Operating Instructions. The Panasonic manuals for Software are available online for free. You can easily download all the documents as PDF.
Page 21
![Page 21
21
Set the maximum refresh interval [Performance]
Click the [System] button, and then click the [Performance] tab to display the Performance page.
Enter a number of images to be refreshed per second.
Maximum refresh interval (JPEG/VGA)
Enter a number from 1 to 300 (ips) for the maximum
refresh interval. An image to be refreshed is a JPEG
image of VGA size (640 x 480).
Default:100 (ips)[Set] button
The edited settings will be saved and applied.
Notes:
•The default is the value determined on the...](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-20.png "Page 21
21
Set the maximum refresh interval [Performance]
Click the [System] button, and then click the [Performance] tab to display the Performance page.
Enter a number of images to be refreshed per second.
Maximum refresh interval (JPEG/VGA)
Enter a number from 1 to 300 (ips) for the maximum
refresh interval. An image to be refreshed is a JPEG
image of VGA size (640 x 480).
Default:100 (ips)[Set] button
The edited settings will be saved and applied.
Notes:
•The default is the value determined on the...")
21 Set the maximum refresh interval [Performance] Click the [System] button, and then click the [Performance] tab to display the Performance page. Enter a number of images to be refreshed per second. Maximum refresh interval (JPEG/VGA) Enter a number from 1 to 300 (ips) for the maximum refresh interval. An image to be refreshed is a JPEG image of VGA size (640 x 480). Default:100 (ips)[Set] button The edited settings will be saved and applied. Notes: •The default is the value determined on the...
Page 22
![Page 22
22
Configure the settings relating to the camera title [Text display
setting]
Click the [System] button, and then click the [Text display setting] tab to display the Text display setting page.
On/off of the camera title display, font size and display position can be configured.
The camera title setting can be configured on the Camera setup page of each device.
Refer to page 26, 33, 39 for further information about the camera title.
Text display
Select ON or OFF to determine whether or not to
display the...](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-21.png "Page 22
22
Configure the settings relating to the camera title [Text display
setting]
Click the [System] button, and then click the [Text display setting] tab to display the Text display setting page.
On/off of the camera title display, font size and display position can be configured.
The camera title setting can be configured on the Camera setup page of each device.
Refer to page 26, 33, 39 for further information about the camera title.
Text display
Select ON or OFF to determine whether or not to
display the...")
22 Configure the settings relating to the camera title [Text display setting] Click the [System] button, and then click the [Text display setting] tab to display the Text display setting page. On/off of the camera title display, font size and display position can be configured. The camera title setting can be configured on the Camera setup page of each device. Refer to page 26, 33, 39 for further information about the camera title. Text display Select ON or OFF to determine whether or not to display the...
Page 23
![Page 23
23
Settings relating to the device management
Devices can be registered, and the registered information can be edited or deleted. The maximum number of device
registration varies depending on the device type.
Refer to the System specifications section (page 4) for number of the devices that can be registered.
Register a recorder [Basic setup]
Step 1
Click the [Device mng.] button.
→The Basic setup page of Device mng. will be
displayed.
Step 2
Click the [Recorder] tab.
→The Registered device window of...](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-22.png "Page 23
23
Settings relating to the device management
Devices can be registered, and the registered information can be edited or deleted. The maximum number of device
registration varies depending on the device type.
Refer to the System specifications section (page 4) for number of the devices that can be registered.
Register a recorder [Basic setup]
Step 1
Click the [Device mng.] button.
→The Basic setup page of Device mng. will be
displayed.
Step 2
Click the [Recorder] tab.
→The Registered device window of...")
23 Settings relating to the device management Devices can be registered, and the registered information can be edited or deleted. The maximum number of device registration varies depending on the device type. Refer to the System specifications section (page 4) for number of the devices that can be registered. Register a recorder [Basic setup] Step 1 Click the [Device mng.] button. →The Basic setup page of Device mng. will be displayed. Step 2 Click the [Recorder] tab. →The Registered device window of...
Page 24
![Page 24
24
Important:
•When displaying images directly from cameras, live
images will be received without using a proxy serv-
er.
•When receiving MPEG-4 images, live images will
be received without using a proxy server.
Note:
The proxy server address can be set on the [Basic
setup] tab of the Comm page (page 54).
[Start…] button
Recorder information will be downloaded based on the
settings of Address, HTTP port number and Use a
proxy server.
Model no.
The model number contained in the downloaded
recorder...](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-23.png "Page 24
24
Important:
•When displaying images directly from cameras, live
images will be received without using a proxy serv-
er.
•When receiving MPEG-4 images, live images will
be received without using a proxy server.
Note:
The proxy server address can be set on the [Basic
setup] tab of the Comm page (page 54).
[Start…] button
Recorder information will be downloaded based on the
settings of Address, HTTP port number and Use a
proxy server.
Model no.
The model number contained in the downloaded
recorder...")
24 Important: •When displaying images directly from cameras, live images will be received without using a proxy serv- er. •When receiving MPEG-4 images, live images will be received without using a proxy server. Note: The proxy server address can be set on the [Basic setup] tab of the Comm page (page 54). [Start…] button Recorder information will be downloaded based on the settings of Address, HTTP port number and Use a proxy server. Model no. The model number contained in the downloaded recorder...
Page 25
![Page 25
25
Step 6
Click the [OK] button.
→The downloading status window will be displayed.
To cancel downloading the recorder information,
click the [Cancel] button on the displayed down-
loading status window.
Step 7
The message window will be displayed when down-
load process ended.
1. Click the [OK] button.
→The confirmation window will close.
2. Go to step 8.
1. Click the [OK] button on the error message window
and check if the information on the Device regis-
tration window has been edited correctly....](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-24.png "Page 25
25
Step 6
Click the [OK] button.
→The downloading status window will be displayed.
To cancel downloading the recorder information,
click the [Cancel] button on the displayed down-
loading status window.
Step 7
The message window will be displayed when down-
load process ended.
1. Click the [OK] button.
→The confirmation window will close.
2. Go to step 8.
1. Click the [OK] button on the error message window
and check if the information on the Device regis-
tration window has been edited correctly....")
25 Step 6 Click the [OK] button. →The downloading status window will be displayed. To cancel downloading the recorder information, click the [Cancel] button on the displayed down- loading status window. Step 7 The message window will be displayed when down- load process ended. 1. Click the [OK] button. →The confirmation window will close. 2. Go to step 8. 1. Click the [OK] button on the error message window and check if the information on the Device regis- tration window has been edited correctly....
Page 26
![Page 26
26
Step 9
Click the [Setup…] button.
→The Camera setup window will be displayed.
The following are descriptions about each item dis-
played on the Camera setup window of the recorder.
[Camera 1-16]/[Camera 17-32] tabs
Click the tab to change the setup page.
Notes:
•Only the [Camera 1-16] tab will be displayed when
the recorder is the ND200.
•The [Camera 1-16] tab will not be displayed when
the recorder is the HD300.
CH
The camera channel numbers will be displayed.Title
The camera titles contained in...](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-25.png "Page 26
26
Step 9
Click the [Setup…] button.
→The Camera setup window will be displayed.
The following are descriptions about each item dis-
played on the Camera setup window of the recorder.
[Camera 1-16]/[Camera 17-32] tabs
Click the tab to change the setup page.
Notes:
•Only the [Camera 1-16] tab will be displayed when
the recorder is the ND200.
•The [Camera 1-16] tab will not be displayed when
the recorder is the HD300.
CH
The camera channel numbers will be displayed.Title
The camera titles contained in...")
26 Step 9 Click the [Setup…] button. →The Camera setup window will be displayed. The following are descriptions about each item dis- played on the Camera setup window of the recorder. [Camera 1-16]/[Camera 17-32] tabs Click the tab to change the setup page. Notes: •Only the [Camera 1-16] tab will be displayed when the recorder is the ND200. •The [Camera 1-16] tab will not be displayed when the recorder is the HD300. CH The camera channel numbers will be displayed.Title The camera titles contained in...
Page 27
27 Live image source Select Camera or Recorder to determine whether to display live images directly from the camera or via the recorder. Recorder:Display live images from the camera via the recorder Camera:Display live images directly from the camera Even when selecting Camera, it is necessary to register the camera in the recorder. Refer to the operating instructions of the recorder in use for how to register the camera. Default: Model no. Live image source WV-NF284 Camera WV-NP24x Camera WV-NP100x...
Page 28
28 Model no. Resolution WV-NF284 Auto/QVGA/VGA WV-NP24x Auto/QVGA/VGA WV-NP100x Auto/QVGA/VGA/SXVGA*1 WV-NS202 Auto/QVGA/VGA WV-NS202A Auto/QVGA/VGA WV-NW484 Auto/QVGA/VGA WJ-NT304 --*2 WV-NP472 --*2 WV-NS32x --*2 WV-NW47x --*2 Others --*2 *1 When Partial is selected for the scan mode of the camera, the resolution will be 960 x 720. *2 Cannot select any parameter for Resolution (JPEG). Refresh interval (JPEG) Determine the refresh interval of the camera (number of images to be refreshed per second). The...
Page 29
![Page 29
29
Edit the registered recorder information [Basic setup]
Step 1
Display the Registered device window of the
recorder. (page 23)
Step 2
Select the recorder whose information is to be edited,
and then click the [Edit…] button.
→The Device registration window will be displayed.
Step 3
Click the [Set] button after editing the information.
Refer to the Register a recorder [Basic setup] section
(page 23) for further information.
→The Device registration window will close and the
settings will be saved and...](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-28.png "Page 29
29
Edit the registered recorder information [Basic setup]
Step 1
Display the Registered device window of the
recorder. (page 23)
Step 2
Select the recorder whose information is to be edited,
and then click the [Edit…] button.
→The Device registration window will be displayed.
Step 3
Click the [Set] button after editing the information.
Refer to the Register a recorder [Basic setup] section
(page 23) for further information.
→The Device registration window will close and the
settings will be saved and...")
29 Edit the registered recorder information [Basic setup] Step 1 Display the Registered device window of the recorder. (page 23) Step 2 Select the recorder whose information is to be edited, and then click the [Edit…] button. →The Device registration window will be displayed. Step 3 Click the [Set] button after editing the information. Refer to the Register a recorder [Basic setup] section (page 23) for further information. →The Device registration window will close and the settings will be saved and...
Page 30
![Page 30
30
Delete the registered recorder [Basic setup]
Step 1
Display the Registered device window of the
recorder. (page 23)
Step 2
Select the recorder to be deleted.
Step 3
Click the [Delete…] button.
→The confirmation window will be displayed.
Step 4
Click the [OK] button.
→The device information will be deleted.
Note:
When a message window is displayed by clicking
the [Delete…] button, refer to the Displayed mes-
sages and solutions section on page 73 and follow
the instructions.](http://img.usermanuals.tech/thumb/58/68581/w300_wv-asm10_en_om_d-29.png "Page 30
30
Delete the registered recorder [Basic setup]
Step 1
Display the Registered device window of the
recorder. (page 23)
Step 2
Select the recorder to be deleted.
Step 3
Click the [Delete…] button.
→The confirmation window will be displayed.
Step 4
Click the [OK] button.
→The device information will be deleted.
Note:
When a message window is displayed by clicking
the [Delete…] button, refer to the Displayed mes-
sages and solutions section on page 73 and follow
the instructions.")
30 Delete the registered recorder [Basic setup] Step 1 Display the Registered device window of the recorder. (page 23) Step 2 Select the recorder to be deleted. Step 3 Click the [Delete…] button. →The confirmation window will be displayed. Step 4 Click the [OK] button. →The device information will be deleted. Note: When a message window is displayed by clicking the [Delete…] button, refer to the Displayed mes- sages and solutions section on page 73 and follow the instructions.