Panasonic Network PT-F300 Operation Manual

61

Using WebBrowser
Select [NETWORK CONTROL] in the network menu.1
Select [ON] or [OFF] with the [] buttons.
ON : This enables control on the WebBrowser.
OFF  : This disables control on the WebBrowser.2
Control a projector through the WebBrowser of a computer. It is called “WEB Control”.
(The example is when using Microsoft Internet Explorer.)
Connect the projector and PC with wired or wireless LAN. (See page 15)
Before using the WebBrowser control
•  When the projector settings have been changed using...

62

Using WebBrowser (cont.)
 Enabling JavaScript
If JavaScript has been set to disable, enable it.
2Select [Security] and set the security level to [Default Level], or sele\
ct [Custom 
Level] and check the [Enable] checkbox under [Active scripting].
Open  window.
Click	[Start]	→	[Control	Panel]	→	[Network	and	Internet	Connections]	→	[Internet	Option].1
Accessing from the WebBrowser

1
Click [WEB CONTROL] on the launcher.
Or start up the WebBrowser, and enter the IP address set by the projector.
The...

63

Using WebBrowser (cont.)
This page indicates the projector status.
To access this page from other pages, click [Status] at the left of the w\
indow.
Monitor information window
The	monitor	information	is	refreshed	at	fixed	intervals,	but	the	current	exact	information	can	be	checked	by	clicking	[View]	→	
[Refresh].
 Projector status
On this window, click the [Projector status] tab.
 Network status
On this window, click the [Network status] tab.
If [SELF TEST Error (Detail)] appears on the monitored...

64

You can make various projector settings.
If you migrate from other page, click [Projector control] in the main me\
nu (left of the window).
Projector control window
 Basic control window
On this window, click the [Basic control] tab.
 Advanced control window
On this window, click the [Advanced control] tab.
Using WebBrowser (cont.)
Connection with the projector may not be possible immediately after the \
power is turned on. In this case wait a bit and then 
make the connection again. 

65

Using WebBrowser (cont.)
3
Complete the detailed settings and click 
[Next].
When [Next] is clicked, the next page appears, enabling you to 
complete the detailed settings as desired.
After all required items have been entered, a confirmation 
window appears.
 Making the above settings effective
Select [WIRELESS LAN] in the network menu of the projector, and use the [] buttons to select the network set in this 
page.
You can make detail network settings on projector, when connecting without the...

66

 Time settings
Click	[Detailed	set	up]→[Adjust	clock]	in	the	menu.	
Time zone                            :  Select the time zone and click [Set 
time zone]. 
Time                                    :  Enter the current date and time in 
[Date] and [Time], and then click [Set 
date and time].
 Email settings
You can specify two email recipients.
Click	[Detailed	set	up]→[E-mail	set	up]	in	the	menu.
•  [MAIL SERVER]
 ENABLE                           : Enable or disable email transmission. 
  SMTP...

67

Using WebBrowser (cont.)
※Example of email message sent
 If [NORMAL] is selected under [MAIL CONTENTS]
A  If you have completed the email settingsB  If an error occurs
 If [SIMPLE] is selected under [MAIL CONTENTS]
C  If you have completed the email settingsD  If an error occurs...

68

Using WebBrowser (cont.)
 Password settings
Click [Change password] in the main menu. 
Set a password for access of the [Projector control window]. 
Enter the previous password and the new password. 
Enter the new password in [Retype] and click [OK].
 Authentication server settings
Click	[Detailed	set	up]→[Authentication	set	up]	in	the	menu.
Auth                    : Change the authentication method as desired.
SMTP Auth          :  For SMTP authentication, change the 
authentication method to use,...

69

Using PJLink™ protocol
The projector’s network functions conform to PJLink™ Class 1 standards, enabling th\
e following operations from a computer 
using the PJLink™ protocol. 
• Setting the projector 
•  Querying the projector status
The following commands are used to control the projector with the PJLink\
™ protocol.
CommandControl detailsNotes
POWRPower control
Parameters
0 = Standby
1 = On
POWR ?Power status query
Parameters
0 = Standby             1 = On
2 = Cooling down      3 = Warming up...

70

Software Uninstall
Wireless Manager ME 5.5
From	the	desktop,	select	[Start]	→	[All	Programs]	→	[Panasonic	Wireless	Display]	→	
[Uninstall Wireless Manager mobile edition 5.5].
Follow the instructions appearing on the screen and uninstall the softwa\
re.