Panasonic Network PT-F300 Operation Manual

51

Setting options (cont.)
 Automatic connection setting
You can perform automatic settings for newly connected projectors.
•  If the [Make an automatic connection] box is checked and a projector is registered 
as a destination for automatic connection when Wireless Manager ME 5.5 i\
s started, 
 window – [S-MAP] do not appear and connection is p\
erformed 
automatically.
•  When [Setting] is clicked,  window appears and you can select projector(s) 
for automatic connections. Up to 10 projectors may be...

52

Network/Security setting of the projector
When making a connection between a computer and a projector with setting\
s other than the default settings, perform the 
procedure below to display the menu required when changing the initial s\
ettings. For detailed setting, see the operation manual 
for your projector.
Select	[NETWORK]	with	the	[▲▼]	buttons.
The network menu appears.2
Press the [MENU] button on the projector.
The main menu appears.1
Displaying the Network Menu
• The screen shown above is...

53

You can make detailed wired LAN settings.
Select [WIRED LAN] at the network menu and click the [ENTER] button.
DHCP※:
ON:   If a DHCP server exists in the network to which the projector is connected, the I\
P address will automatically be 
acquired.
OFF:    If a DHCP server does not exist in the network to which the projector is connected, additionally set [IP ADDRESS※], 
[SUBNETMASK※] and [DEFAULT GATEWAY※].
※ “Glossary” (See page 71)
Wired LAN settings
WIRED DETAILED SETUP 
OK CANCEL 
RETURN...

54

Select [WIRELESS LAN] at the network menu.1
Select the number to be connected with the [] buttons.2
RETURN
ENTERSELECT
LANGUAGE
PROJECTOR SETUP
SECURITY
POSITION
DISPLAY OPTION
WIRED LAN
NAME CHANGEPASSWORDPASSWORD CHANGENETWORK STANDBYNETWORK CONTROLLIVE MODE CUT INCOMPUTER SEARCHMULTI-LIVESTATUSINITIALIZE
ONOFF
OFF
OFF
PICTURE
NETWORK
S-MAPWIRELESS LAN
Setting network number (for wireless LAN)
Network/Security setting of the projector (cont.)
You can configure more precise network settings, if you...

55

Network/Security setting of the projector (cont.)
Select [NEXT] on the IP address setting window to switch to the wireless setting window. 
Make the settings related to the wireless connection between the project\
or and the network.
Wireless settings
 SSID※  :   If the mode is [INFRASTRUCTURE※], enter the SSID registered at the access point. If the mode is 
[AD HOC], enter the same character string as that of SSID set on the com\
puter to be connected.
 MODE  : Select [AD HOC] or [INFRASTRUCTURE]....

56

Network/Security setting of the projector (cont.)
Additionally perform the following setting using the [AUTHENTICATION] setting.
  When setting [OPEN] or [SHARED] as authentication and setting [WEP※] as the encryption method:
  DEFAULT KEY  :  Set 1 – 4 numerals for the default key.
  KEY 1 – 4  : Set these to match the WEP key registered in [DEFAULT KEY] and select [OK].
           Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key, input five alphanumerics (or a 10-digit 
string...

57

Network/Security setting of the projector (cont.)
You can change the projector name on the network.
It will help to distinguish names in the  window ([S-\
MAP], [1-4/U]).
Select [NAME CHANGE] at the network menu and press the [ENTER] button.1
Enter the projector name using the [▲▼ENTER]	
buttons.
Select [ALL DELETE] to remove all the entered characters. Press the [DEFAULT] 
button on the remote-controller to clear a letter which is selected by t\
he cursor in the 
entry box.
2
After entering the...

58

Enter the password using the [▲▼ENTER]	buttons.
Select [ALL DELETE] to remove all the entered characters. Press the [DEFAULT] 
button on the remote control to clear a letter which is selected by the \
cursor in the 
entry box.
4
After entering the password, select [OK] and click [ENTER].
Select [CANCEL] to undo the changes and then press [ENTER].5
NAME CHANGE 
A B C D E F G H I J K L M N a O b P c Q d R e S f T g U h V i W j X k Y l Z m n 
1 
o 
2 
p 
3 
q 
4 
r 
5 
s 
6 
t 
7 
u 
8 
v 
9 
w 
0 
x...

59

Set it to “ON” if you allow other users on the network to connect \
in live mode while you are also in live mode.
Select [LIVE MODE CUT IN] at the network menu.1
Select [ON] or [OFF] with the [] buttons.2
Live mode cut-in
RETURN
ENTERSELECT
LANGUAGE
PROJECTOR SETUP
SECURITY
POSITION
DISPLAY OPTION
WIRED LAN
NAME CHANGE
COMPUTER SEARCHMULTI-LIVESTATUSINITIALIZE
PICTURE
NETWORK
S-MAPWIRELESS LAN
PASSWORDOFFPASSWORD CHANGEOFFNETWORK STANDBYNETWORK CONTROLONLIVE MODE CUT INOFF
Network/Security setting...

60

Your current settings appear.
Select [STATUS] at the network menu and press the [ENTER] button.
Verifying settings
Network/Security setting of the projector (cont.)
You can reset the network setting to the factory default of the projector\
.
Select [INITIALIZE] at the network menu and press the [ENTER] button.1
Select [OK] with the [] buttons and press the [ENTER] 
button.2
Returning to the initial settings
The entry of the password is prompted if [Password setting] is turned [O\
N] in the “...