Panasonic Network PT-F300 Operation Manual

							
51

Setting options (cont.)
 Automatic connection setting
You can perform automatic settings for newly connected projectors.
•  If the [Make an automatic connection] box is checked and a projector is registered 
as a destination for automatic connection when Wireless Manager ME 5.5 i\
s started, 
 window – [S-MAP] do not appear and connection is p\
erformed 
automatically.
•  When [Setting] is clicked,  window appears and you can select projector(s) 
for automatic connections. Up to 10 projectors may be displayed in the o\
rder of most 
recent connection history. When it is desired to remove a projector from the display list, 
select	it	and	press	the	[DELETE]	→	[OK]	button.
Other
The version information of Wireless Manager ME 5.5 is displayed when [] on the  window is clicked.
Version information
 User settings
•   User name 
When [Setting] is clicked, the  window to the right a\
ppears. 
Specify the icon and user name shown on the  window (\
[S-MAP], 
[1-4/U]).
 Setting Favorites
It is possible to assign a different name to connected projectors.
The name appears at the bottom of the  
window. 
Click [Settings] to display the  screen, 
and enter a name for the projector.
Perform other settings.
Enter the user name in up to 8 alphanumerics.
•   Favorites Button
 
Assign whichever function you like to a specific launcher button. (See page 34)
 : [Select Access Port]  : [WEB control]
 : [Option]  : [AV Mute]
 : [Selective Area Transmission]  : [Display Change]
 : [Virtual Remocon]  : [None]
•   Adaptors
 
Set the adaptor that is used normally. (Wireless/wired LAN adaptor). 
						

							
52

Network/Security setting of the projector
When making a connection between a computer and a projector with setting\
s other than the default settings, perform the 
procedure below to display the menu required when changing the initial s\
ettings. For detailed setting, see the operation manual 
for your projector.
Select	[NETWORK]	with	the	[▲▼]	buttons.
The network menu appears.2
Press the [MENU] button on the projector.
The main menu appears.1
Displaying the Network Menu
• The screen shown above is an example of PT-FW300NTE/F300NTE.
•  Depending on the signals which are input to the projector, it may not be possible to adjust some of the items and use some of 
the functions. In the case of an item that cannot be adjusted or a funct\
ion that cannot be used, the corresponding on-screen 
item will not be displayed, and you will not be able to execute it even \
when you press the [ENTER] button.
•  The displayed screen, name and operation vary depending on the type of projectors. (
See page 48)
RETURN
ENTERSELECT
LANGUAGE
PROJECTOR SETUP
SECURITY
NETWORK
POSITION
DISPLAY OPTION
WIRED LANWIRELESS LANNAME CHANGEPASSWORDPASSWORD CHANGENETWORK STANDBYNETWORK CONTROLLIVE MODE CUT INCOMPUTER SEARCHMULTI-LIVESTATUSINITIALIZE
ON
S-MAP
OFF
OFF
OFF
PICTURE
RETURN
ENTERSELECT
LANGUAGE
PROJECTOR SETUP
SECURITY
NETWORK
POSITION
DISPLAY OPTION
PICTUREPICTURE MODECONTRASTBRIGHTNESSCOLORTINT
DYNAMICµ ´µ ´µ ´µ ´SHARPNESSCOLOR TEMPERATUREDAYLIGHT VIEWDIGITAL CINEMA REALITYNOISE REDUCTIONTV-SYSTEM
DEFAULTAUTOONOFFAUTO
µ ´ 
						

							
53

You can make detailed wired LAN settings.
Select [WIRED LAN] at the network menu and click the [ENTER] button.
DHCP※:
ON:   If a DHCP server exists in the network to which the projector is connected, the I\
P address will automatically be 
acquired.
OFF:    If a DHCP server does not exist in the network to which the projector is connected, additionally set [IP ADDRESS※], 
[SUBNETMASK※] and [DEFAULT GATEWAY※].
※ “Glossary” (See page 71)
Wired LAN settings
WIRED DETAILED SETUP 
OK CANCEL 
RETURN SELECT 
DHCP IP ADDRESS SUBNETMASK DEFAULT GATEWAY
192.168.   10.100 OFF 
192.168.   10.    1 255.255.255.     0 
The following wired LAN settings are set before the projector leaves the\
 factory.
DHCP   : OFF
IP ADDRESS  : 192.168.10.100
SUBNETMASK  : 255.255.255.0
DEFAULT GATEWAY  :  192.168.10.1
Default wired LAN settings
A wired LAN and wireless LAN cannot be used in the same segment.
Network/Security setting of the projector (cont.) 
						

							
54

Select [WIRELESS LAN] at the network menu.1
Select the number to be connected with the [] buttons.2
RETURN
ENTERSELECT
LANGUAGE
PROJECTOR SETUP
SECURITY
POSITION
DISPLAY OPTION
WIRED LAN
NAME CHANGEPASSWORDPASSWORD CHANGENETWORK STANDBYNETWORK CONTROLLIVE MODE CUT INCOMPUTER SEARCHMULTI-LIVESTATUSINITIALIZE
ONOFF
OFF
OFF
PICTURE
NETWORK
S-MAPWIRELESS LAN
Setting network number (for wireless LAN)
Network/Security setting of the projector (cont.)
You can configure more precise network settings, if you select from [USER\
1] to [USER3] (user) for [Wireless LAN] in the 
network menu. For network settings, contact your network administrator.
[USER] settings
 How to display IP address setting menu
			Press	[WIRELESS	LAN]→[USER1]	-	[USER3]→[ENTER]	at	the	network	menu.
DHCP※:
ON:   If a DHCP server exists in the network to which the projector is connected, the I\
P address will automatically be 
acquired.
OFF:    If a DHCP server does not exist in the network to which the projector is connected, additionally set [IP ADDRESS※], 
[SUBNETMASK※] and [DEFAULT GATEWAY※].
※ “Glossary” (See page 71)
Setting IP
WIRELESS DETAILED SETUP 
NEXT CANCEL 
RETURN SELECT ENTER 
DHCPIP ADDRESS SUBNETMASK DEFAULT GATEWAY
192.168.   11.100OFF 
192.168.   11.    1255.255.255.     0 
NAME CHANGE USER1 1/3USER1 
A wired LAN and wireless LAN cannot be used in the same segment.
Selecting [OFF] disables the wireless LAN. • 
Network number
  Off, [S-MAP], [1]-[4], [USER1]-[USER3]  
						

							
55

Network/Security setting of the projector (cont.)
Select [NEXT] on the IP address setting window to switch to the wireless setting window. 
Make the settings related to the wireless connection between the project\
or and the network.
Wireless settings
 SSID※  :   If the mode is [INFRASTRUCTURE※], enter the SSID registered at the access point. If the mode is 
[AD HOC], enter the same character string as that of SSID set on the com\
puter to be connected.
 MODE  : Select [AD HOC] or [INFRASTRUCTURE].
  AD HOC※  :   Connect projector and computer directly without access point.
  INFRASTRUCTURE※ :  Connect through access point.
 AUTHENTICATION  :   Set the user authentication method used by the network to be connected.
  OPEN  :   Select when making a connection using [AD HOC], or when the access point\
 authentication method is 
OpenSystem※.
  SHARED  :   Select when making a connection using [AD HOC], or when the access point\
 authentication method is 
Shared Key※.
  WPA-PSK※  :   Select when the access point authentication method is WPA-PSK.
  WPA2-PSK※  :   Select when the access point authentication method is WPA2-PSK.
 ENCRYPTION  :   Select the encryption method to be used for communication between the projector and the network.
  NONE   :   Select when transmit without encryption. It is selectable only when [AUTHENTICATION] is [OPEN] or 
[SHARED].
  WEP※    : Select when ENCRYPTION is WEP.
  TKIP※    : Select when ENCRYPTION is TKIP.
        Selectable when [AUTHENTICATION] is either [WPA-PSK] or [WPA2-PSK].
  AES
※    : Select when ENCRYPTION is AES.
        Selectable when [AUTHENTICATION] is either [WPA-PSK] or [WPA2-PSK].
※ “Glossary” (See page 72)
• If you are unable to connect to the wireless LAN through the access point even after performing the steps in “A Projector 
settings (See page 24),” contact the manufacturer of the access point.
• IEEE802.1x is not supported.
• If you finished entering settings, press [NEXT].
WIRELESS DETAILED SETUP
NEXTCANCELRETURN
RETURNSELECTENTER
MODEAUTHENTICATIONENCRYPTIONCHANNEL
OPENAD HOC
1NONE
SSIDPanasonic Projector2/3USER1
SSID has to be entered in lower-case alphanumeric letters. 
						

							
56

Network/Security setting of the projector (cont.)
Additionally perform the following setting using the [AUTHENTICATION] setting.
  When setting [OPEN] or [SHARED] as authentication and setting [WEP※] as the encryption method:
  DEFAULT KEY  :  Set 1 – 4 numerals for the default key.
  KEY 1 – 4  : Set these to match the WEP key registered in [DEFAULT KEY] and select [OK].
           Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key, input five alphanumerics (or a 10-digit 
string for the hexadecimal format) for the 128-bit key, input 13 alphanumerics (or a 26-digit string for the 
hexadecimal format).
 When using [WPA-PSK※] or [WPA2-PSK※] : Set key and select [OK].
          Input either 8 to 63 alphanumerics or a 64 digit string in the hexadecimal format.
Important video/audio data is protected because AES※ encryption processing takes place in advance for all network numbers, 
even if [ENCRYPTION] is set to [NONE].
※ “Glossary” (See page 72)
The following settings as [USER1] - [USER3] in the wireless LAN are set \
before the projector leaves the factory.
SSID  : Panasonic Projector
DHCP   : OFF
IP ADDRESS  : 192.168.11.100
SUBNETMASK  : 255.255.255.0
DEFAULT GATEWAY  :  192.168.11.1
MODE  : AD HOC
AUTHENTICATION  : OPEN
ENCRYPTION  : NONE
CHANNEL   : 11
Default settings of [USER1] - [USER3]
WIRELESS DETAILED SETUP
OKCANCELRETURN
RETURNSELECT
KEY1KEY2KEY3KEY4
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
DEFAULT KEY13/3USER1 
						

							
57

Network/Security setting of the projector (cont.)
You can change the projector name on the network.
It will help to distinguish names in the  window ([S-\
MAP], [1-4/U]).
Select [NAME CHANGE] at the network menu and press the [ENTER] button.1
Enter the projector name using the [▲▼ENTER]	
buttons.
Select [ALL DELETE] to remove all the entered characters. Press the [DEFAULT] 
button on the remote-controller to clear a letter which is selected by t\
he cursor in the 
entry box.
2
After entering the projector name, select [OK] and click 
[ENTER].
Select [CANCEL] to undo the changes and then press [ENTER].
3
Changing the projector name
This setting is used to limit the users that can connect to the projecto\
r.
Select [PASSWORD] at the network menu.1
Select [ON] with the [] buttons.2
Select [PASSWORD CHANGE] at the network menu and press the [ENTER] button.3
Password setting
RETURN
ENTERSELECT
LANGUAGE
PROJECTOR SETUP
SECURITY
POSITION
DISPLAY OPTION
WIRED LAN
NAME CHANGEPASSWORDPASSWORD CHANGENETWORK STANDBYNETWORK CONTROLLIVE MODE CUT INCOMPUTER SEARCHMULTI-LIVESTATUSINITIALIZE
ONOFF
OFF
OFF
PICTURE
NETWORK
S-MAPWIRELESS LAN
NAME CHANGE 
A B C D E F G H I J K L M N a O b P c Q d R e S f T g U h V i W j X k Y l Z m n 
1 
o 
2 
p 
3 
q 
4 
r 
5 
s 
6 
t 
7 
u 
8 
v 
9 
w 
0 
x 
SPACE 
ALL DELETE
y z 
!  # $ % & ’ * + - / / = ? @ ^ _ ` | ~ ( ) < > [ ] { } , . : ; 
OK CANCEL 
RETURN 
ENTER SELECT 
FW300NT
RETURN
ENTERSELECT
LANGUAGE
PROJECTOR SETUP
SECURITY
POSITION
DISPLAY OPTION
WIRED LAN
NAME CHANGE
PASSWORD CHANGENETWORK STANDBYNETWORK CONTROLLIVE MODE CUT INCOMPUTER SEARCHMULTI-LIVESTATUSINITIALIZE
ONOFF
OFF
PICTURE
NETWORK
S-MAPWIRELESS LAN
PASSWORDOFF
RETURN
ENTERSELECT
LANGUAGE
PROJECTOR SETUP
SECURITY
POSITION
DISPLAY OPTION
WIRED LAN
NAME CHANGE
NETWORK STANDBYNETWORK CONTROLLIVE MODE CUT INCOMPUTER SEARCHMULTI-LIVESTATUSINITIALIZE
ONOFF
OFF
PICTURE
NETWORK
S-MAPWIRELESS LAN
PASSWORDOFFPASSWORD CHANGE 
						

							
58

Enter the password using the [▲▼ENTER]	buttons.
Select [ALL DELETE] to remove all the entered characters. Press the [DEFAULT] 
button on the remote control to clear a letter which is selected by the \
cursor in the 
entry box.
4
After entering the password, select [OK] and click [ENTER].
Select [CANCEL] to undo the changes and then press [ENTER].5
NAME CHANGE 
A B C D E F G H I J K L M N a O b P c Q d R e S f T g U h V i W j X k Y l Z m n 
1 
o 
2 
p 
3 
q 
4 
r 
5 
s 
6 
t 
7 
u 
8 
v 
9 
w 
0 
x 
SPACE 
ALL DELETE
y z 
!  # $ % & ’ * + - / / = ? @ ^ _ ` | ~ ( ) < > [ ] { } , . : ; 
OK CANCEL 
RETURN 
ENTER SELECT 
ÎÎÎÎÎÎ
Network/Security setting of the projector (cont.)
Set it to “ON”, if you want to turn on the projector in standby mo\
de from the PC that is connected to the network via wired LAN 
or wireless LAN.
Select [NETWORK STANDBY] at the network menu.1
Select [ON] or [OFF] with the [] buttons.2
Network standby
RETURN
ENTERSELECT
LANGUAGE
PROJECTOR SETUP
SECURITY
POSITION
DISPLAY OPTION
WIRED LAN
NAME CHANGE
NETWORK CONTROLLIVE MODE CUT INCOMPUTER SEARCHMULTI-LIVESTATUSINITIALIZE
ONOFF
PICTURE
NETWORK
S-MAPWIRELESS LAN
PASSWORDOFFPASSWORD CHANGEOFFNETWORK STANDBY
It is recommended to change password on a regular basis for keeping it p\
rivate.
Set it to “ON”, if you want to control the projector from the PC t\
hat is network-connected.
Select [NETWORK CONTROL] at the network menu.1
Select [ON] or [OFF] with the [] buttons.2
Network control
RETURN
ENTERSELECT
LANGUAGE
PROJECTOR SETUP
SECURITY
POSITION
DISPLAY OPTION
WIRED LAN
NAME CHANGE
LIVE MODE CUT INCOMPUTER SEARCHMULTI-LIVESTATUSINITIALIZE
OFF
PICTURE
NETWORK
S-MAPWIRELESS LAN
PASSWORDOFFPASSWORD CHANGEOFFNETWORK STANDBYNETWORK CONTROLON
If you turn on [NETWORK CONTROL], “WEB control”, “PJLinkTM” and “Command control” are available. 
						

							
59

Set it to “ON” if you allow other users on the network to connect \
in live mode while you are also in live mode.
Select [LIVE MODE CUT IN] at the network menu.1
Select [ON] or [OFF] with the [] buttons.2
Live mode cut-in
RETURN
ENTERSELECT
LANGUAGE
PROJECTOR SETUP
SECURITY
POSITION
DISPLAY OPTION
WIRED LAN
NAME CHANGE
COMPUTER SEARCHMULTI-LIVESTATUSINITIALIZE
PICTURE
NETWORK
S-MAPWIRELESS LAN
PASSWORDOFFPASSWORD CHANGEOFFNETWORK STANDBYNETWORK CONTROLONLIVE MODE CUT INOFF
Network/Security setting of the projector (cont.)
Multi-live
Computer search
RETURN
ENTERSELECT
LANGUAGE
PROJECTOR SETUP
SECURITY
POSITION
DISPLAY OPTION
WIRED LAN
NAME CHANGE
COMPUTER SEARCHMULTI-LIVESTATUSINITIALIZE
PICTURE
NETWORK
S-MAPWIRELESS LAN
PASSWORDOFFPASSWORD CHANGEOFFNETWORK STANDBYNETWORK CONTROLONLIVE MODE CUT INOFF
You can perform the same operation in stead of using the [COMPUTER SEARCH\
] button on the remote control.
Select [COMPUTER SEARCH] from the network menu, and then press [ENTER].1
RETURN
ENTERSELECT
LANGUAGE
PROJECTOR SETUP
SECURITY
POSITION
DISPLAY OPTION
WIRED LAN
NAME CHANGE
COMPUTER SEARCHMULTI-LIVESTATUSINITIALIZE
PICTURE
NETWORK
S-MAPWIRELESS LAN
PASSWORDOFFPASSWORD CHANGEOFFNETWORK STANDBYNETWORK CONTROLONLIVE MODE CUT INOFF
You can perform the same operation in stead of using the [MULTI-LIVE] button on the remote control.
Select [MULTI-LIVE] from the network menu, and then press [ENTER].1 
						

							
60

Your current settings appear.
Select [STATUS] at the network menu and press the [ENTER] button.
Verifying settings
Network/Security setting of the projector (cont.)
You can reset the network setting to the factory default of the projector\
.
Select [INITIALIZE] at the network menu and press the [ENTER] button.1
Select [OK] with the [] buttons and press the [ENTER] 
button.2
Returning to the initial settings
The entry of the password is prompted if [Password setting] is turned [O\
N] in the “ Security” menu.
The status of the following will appear.
WIRED LANWIRELESS LAN
DHCP“ON” - “OFF”ANTENNA LEVEL(The strength of the connection will appear.)
IP ADDRESS(See page 53)NETWORK“S-MAP”, “1” - “4”, “USER1” - “USER3”
SUBNETMASK(See page 53)MODE“AD-HOC” - “INFRASTRUCTURE”
DEFAULT GATEWAY(See page 53)CHANNELRefer to page 5 for usable channels.
MAC ADDRESSSSID(See page 55)
AUTHENTICATION“OPEN” - “SHARED”-“WPA-PSK”-“WPA2-PSK” 
DEFAULT KEY“-” - “1” - “4”
ENCRYPTION“NONE” - “WEP” - “TKIP” - “AES”
DHCP“ON” - “OFF”
IP ADDRESS(See pages 54, 56)
SUBNETMASK(See pages 54, 56)
DEFAULT GATEWAY(See pages 54, 56)
MAC ADDRESS
RETURN
ENTERSELECT
LANGUAGE
PROJECTOR SETUP
SECURITY
POSITION
DISPLAY OPTION
WIRED LAN
NAME CHANGE
COMPUTER SEARCHMULTI-LIVESTATUSINITIALIZE
PICTURE
NETWORK
S-MAPWIRELESS LAN
PASSWORDOFFPASSWORD CHANGEOFFNETWORK STANDBYNETWORK CONTROLONLIVE MODE CUT INOFF
RETURN
ENTERSELECT
LANGUAGE
PROJECTOR SETUP
SECURITY
POSITION
DISPLAY OPTION
WIRED LAN
NAME CHANGE
COMPUTER SEARCHMULTI-LIVESTATUSINITIALIZE
PICTURE
NETWORK
S-MAPWIRELESS LAN
PASSWORDOFFPASSWORD CHANGEOFFNETWORK STANDBYNETWORK CONTROLONLIVE MODE CUT INOFF
INITIALIZE
RETURN
ENTERSELECT
INITIALIZE
OKCANCEL