Panasonic Network PT-F300 Operation Manual
Have a look at the manual Panasonic Network PT-F300 Operation Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 56
56
Network/Security setting of the projector (cont.)
Additionally perform the following setting using the [AUTHENTICATION] setting.
When setting [OPEN] or [SHARED] as authentication and setting [WEP※] as the encryption method:
DEFAULT KEY : Set 1 – 4 numerals for the default key.
KEY 1 – 4 : Set these to match the WEP key registered in [DEFAULT KEY] and select [OK].
Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key, input five alphanumerics (or a 10-digit
string...](http://img.usermanuals.tech/thumb/58/75783/w64_pt-f300_en_network_om_d-55.png "Page 56
56
Network/Security setting of the projector (cont.)
Additionally perform the following setting using the [AUTHENTICATION] setting.
When setting [OPEN] or [SHARED] as authentication and setting [WEP※] as the encryption method:
DEFAULT KEY : Set 1 – 4 numerals for the default key.
KEY 1 – 4 : Set these to match the WEP key registered in [DEFAULT KEY] and select [OK].
Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key, input five alphanumerics (or a 10-digit
string...")
![Page 57
57
Network/Security setting of the projector (cont.)
You can change the projector name on the network.
It will help to distinguish names in the window ([S-\
MAP], [1-4/U]).
Select [NAME CHANGE] at the network menu and press the [ENTER] button.1
Enter the projector name using the [▲▼ENTER]
buttons.
Select [ALL DELETE] to remove all the entered characters. Press the [DEFAULT]
button on the remote-controller to clear a letter which is selected by t\
he cursor in the
entry box.
2
After entering the...](http://img.usermanuals.tech/thumb/58/75783/w64_pt-f300_en_network_om_d-56.png "Page 57
57
Network/Security setting of the projector (cont.)
You can change the projector name on the network.
It will help to distinguish names in the window ([S-\
MAP], [1-4/U]).
Select [NAME CHANGE] at the network menu and press the [ENTER] button.1
Enter the projector name using the [▲▼ENTER]
buttons.
Select [ALL DELETE] to remove all the entered characters. Press the [DEFAULT]
button on the remote-controller to clear a letter which is selected by t\
he cursor in the
entry box.
2
After entering the...")
![Page 58
58
Enter the password using the [▲▼ENTER] buttons.
Select [ALL DELETE] to remove all the entered characters. Press the [DEFAULT]
button on the remote control to clear a letter which is selected by the \
cursor in the
entry box.
4
After entering the password, select [OK] and click [ENTER].
Select [CANCEL] to undo the changes and then press [ENTER].5
NAME CHANGE
A B C D E F G H I J K L M N a O b P c Q d R e S f T g U h V i W j X k Y l Z m n
1
o
2
p
3
q
4
r
5
s
6
t
7
u
8
v
9
w
0
x...](http://img.usermanuals.tech/thumb/58/75783/w64_pt-f300_en_network_om_d-57.png "Page 58
58
Enter the password using the [▲▼ENTER] buttons.
Select [ALL DELETE] to remove all the entered characters. Press the [DEFAULT]
button on the remote control to clear a letter which is selected by the \
cursor in the
entry box.
4
After entering the password, select [OK] and click [ENTER].
Select [CANCEL] to undo the changes and then press [ENTER].5
NAME CHANGE
A B C D E F G H I J K L M N a O b P c Q d R e S f T g U h V i W j X k Y l Z m n
1
o
2
p
3
q
4
r
5
s
6
t
7
u
8
v
9
w
0
x...")
![Page 59
59
Set it to “ON” if you allow other users on the network to connect \
in live mode while you are also in live mode.
Select [LIVE MODE CUT IN] at the network menu.1
Select [ON] or [OFF] with the [] buttons.2
Live mode cut-in
RETURN
ENTERSELECT
LANGUAGE
PROJECTOR SETUP
SECURITY
POSITION
DISPLAY OPTION
WIRED LAN
NAME CHANGE
COMPUTER SEARCHMULTI-LIVESTATUSINITIALIZE
PICTURE
NETWORK
S-MAPWIRELESS LAN
PASSWORDOFFPASSWORD CHANGEOFFNETWORK STANDBYNETWORK CONTROLONLIVE MODE CUT INOFF
Network/Security setting...](http://img.usermanuals.tech/thumb/58/75783/w64_pt-f300_en_network_om_d-58.png "Page 59
59
Set it to “ON” if you allow other users on the network to connect \
in live mode while you are also in live mode.
Select [LIVE MODE CUT IN] at the network menu.1
Select [ON] or [OFF] with the [] buttons.2
Live mode cut-in
RETURN
ENTERSELECT
LANGUAGE
PROJECTOR SETUP
SECURITY
POSITION
DISPLAY OPTION
WIRED LAN
NAME CHANGE
COMPUTER SEARCHMULTI-LIVESTATUSINITIALIZE
PICTURE
NETWORK
S-MAPWIRELESS LAN
PASSWORDOFFPASSWORD CHANGEOFFNETWORK STANDBYNETWORK CONTROLONLIVE MODE CUT INOFF
Network/Security setting...")
![Page 60
60
Your current settings appear.
Select [STATUS] at the network menu and press the [ENTER] button.
Verifying settings
Network/Security setting of the projector (cont.)
You can reset the network setting to the factory default of the projector\
.
Select [INITIALIZE] at the network menu and press the [ENTER] button.1
Select [OK] with the [] buttons and press the [ENTER]
button.2
Returning to the initial settings
The entry of the password is prompted if [Password setting] is turned [O\
N] in the “...](http://img.usermanuals.tech/thumb/58/75783/w64_pt-f300_en_network_om_d-59.png "Page 60
60
Your current settings appear.
Select [STATUS] at the network menu and press the [ENTER] button.
Verifying settings
Network/Security setting of the projector (cont.)
You can reset the network setting to the factory default of the projector\
.
Select [INITIALIZE] at the network menu and press the [ENTER] button.1
Select [OK] with the [] buttons and press the [ENTER]
button.2
Returning to the initial settings
The entry of the password is prompted if [Password setting] is turned [O\
N] in the “...")
![Page 61
61
Using WebBrowser
Select [NETWORK CONTROL] in the network menu.1
Select [ON] or [OFF] with the [] buttons.
ON : This enables control on the WebBrowser.
OFF : This disables control on the WebBrowser.2
Control a projector through the WebBrowser of a computer. It is called “WEB Control”.
(The example is when using Microsoft Internet Explorer.)
Connect the projector and PC with wired or wireless LAN. (See page 15)
Before using the WebBrowser control
• When the projector settings have been changed using...](http://img.usermanuals.tech/thumb/58/75783/w64_pt-f300_en_network_om_d-60.png "Page 61
61
Using WebBrowser
Select [NETWORK CONTROL] in the network menu.1
Select [ON] or [OFF] with the [] buttons.
ON : This enables control on the WebBrowser.
OFF : This disables control on the WebBrowser.2
Control a projector through the WebBrowser of a computer. It is called “WEB Control”.
(The example is when using Microsoft Internet Explorer.)
Connect the projector and PC with wired or wireless LAN. (See page 15)
Before using the WebBrowser control
• When the projector settings have been changed using...")
![Page 62
62
Using WebBrowser (cont.)
Enabling JavaScript
If JavaScript has been set to disable, enable it.
2Select [Security] and set the security level to [Default Level], or sele\
ct [Custom
Level] and check the [Enable] checkbox under [Active scripting].
Open window.
Click [Start] → [Control Panel] → [Network and Internet Connections] → [Internet Option].1
Accessing from the WebBrowser
1
Click [WEB CONTROL] on the launcher.
Or start up the WebBrowser, and enter the IP address set by the projector.
The...](http://img.usermanuals.tech/thumb/58/75783/w64_pt-f300_en_network_om_d-61.png "Page 62
62
Using WebBrowser (cont.)
Enabling JavaScript
If JavaScript has been set to disable, enable it.
2Select [Security] and set the security level to [Default Level], or sele\
ct [Custom
Level] and check the [Enable] checkbox under [Active scripting].
Open window.
Click [Start] → [Control Panel] → [Network and Internet Connections] → [Internet Option].1
Accessing from the WebBrowser
1
Click [WEB CONTROL] on the launcher.
Or start up the WebBrowser, and enter the IP address set by the projector.
The...")
![Page 63
63
Using WebBrowser (cont.)
This page indicates the projector status.
To access this page from other pages, click [Status] at the left of the w\
indow.
Monitor information window
The monitor information is refreshed at fixed intervals, but the current exact information can be checked by clicking [View] →
[Refresh].
Projector status
On this window, click the [Projector status] tab.
Network status
On this window, click the [Network status] tab.
If [SELF TEST Error (Detail)] appears on the monitored...](http://img.usermanuals.tech/thumb/58/75783/w64_pt-f300_en_network_om_d-62.png "Page 63
63
Using WebBrowser (cont.)
This page indicates the projector status.
To access this page from other pages, click [Status] at the left of the w\
indow.
Monitor information window
The monitor information is refreshed at fixed intervals, but the current exact information can be checked by clicking [View] →
[Refresh].
Projector status
On this window, click the [Projector status] tab.
Network status
On this window, click the [Network status] tab.
If [SELF TEST Error (Detail)] appears on the monitored...")
![Page 64
64
You can make various projector settings.
If you migrate from other page, click [Projector control] in the main me\
nu (left of the window).
Projector control window
Basic control window
On this window, click the [Basic control] tab.
Advanced control window
On this window, click the [Advanced control] tab.
Using WebBrowser (cont.)
Connection with the projector may not be possible immediately after the \
power is turned on. In this case wait a bit and then
make the connection again.](http://img.usermanuals.tech/thumb/58/75783/w64_pt-f300_en_network_om_d-63.png "Page 64
64
You can make various projector settings.
If you migrate from other page, click [Projector control] in the main me\
nu (left of the window).
Projector control window
Basic control window
On this window, click the [Basic control] tab.
Advanced control window
On this window, click the [Advanced control] tab.
Using WebBrowser (cont.)
Connection with the projector may not be possible immediately after the \
power is turned on. In this case wait a bit and then
make the connection again.")
![Page 65
65
Using WebBrowser (cont.)
3
Complete the detailed settings and click
[Next].
When [Next] is clicked, the next page appears, enabling you to
complete the detailed settings as desired.
After all required items have been entered, a confirmation
window appears.
Making the above settings effective
Select [WIRELESS LAN] in the network menu of the projector, and use the [] buttons to select the network set in this
page.
You can make detail network settings on projector, when connecting without the...](http://img.usermanuals.tech/thumb/58/75783/w64_pt-f300_en_network_om_d-64.png "Page 65
65
Using WebBrowser (cont.)
3
Complete the detailed settings and click
[Next].
When [Next] is clicked, the next page appears, enabling you to
complete the detailed settings as desired.
After all required items have been entered, a confirmation
window appears.
Making the above settings effective
Select [WIRELESS LAN] in the network menu of the projector, and use the [] buttons to select the network set in this
page.
You can make detail network settings on projector, when connecting without the...")
![Page 66
66
Time settings
Click [Detailed set up]→[Adjust clock] in the menu.
Time zone : Select the time zone and click [Set
time zone].
Time : Enter the current date and time in
[Date] and [Time], and then click [Set
date and time].
Email settings
You can specify two email recipients.
Click [Detailed set up]→[E-mail set up] in the menu.
• [MAIL SERVER]
ENABLE : Enable or disable email transmission.
SMTP...](http://img.usermanuals.tech/thumb/58/75783/w64_pt-f300_en_network_om_d-65.png "Page 66
66
Time settings
Click [Detailed set up]→[Adjust clock] in the menu.
Time zone : Select the time zone and click [Set
time zone].
Time : Enter the current date and time in
[Date] and [Time], and then click [Set
date and time].
Email settings
You can specify two email recipients.
Click [Detailed set up]→[E-mail set up] in the menu.
• [MAIL SERVER]
ENABLE : Enable or disable email transmission.
SMTP...")
61 Using WebBrowser Select [NETWORK CONTROL] in the network menu.1 Select [ON] or [OFF] with the [] buttons. ON : This enables control on the WebBrowser. OFF : This disables control on the WebBrowser.2 Control a projector through the WebBrowser of a computer. It is called “WEB Control”. (The example is when using Microsoft Internet Explorer.) Connect the projector and PC with wired or wireless LAN. (See page 15) Before using the WebBrowser control • When the projector settings have been changed using a WebBrowser, the projector will not appear on the connection list until the projector network is switched to [USER 1] - [USER 3]. • After the projector network has been switched to [USER 1] - [USER 3], manually release the proxy settings of the WebBrowser used. A Projector settings Turn [ON] the [NETWORK CONTROL] in the network menu. Open window. Click [Start] → [Control Panel] → [Network and Internet Connections] → [Internet Option].1 2Open [Connections] → [LAN Settings]. 3 If [Use a proxy server for your LAN] is checked, remove the check. If [Use automatic configuration script] has been checked, remove the check. 4Click [OK]. Proxy server settings Release the proxy settings of the WebBrowser used. B Computer settings RETURN ENTERSELECT LANGUAGE PROJECTOR SETUP SECURITY POSITION DISPLAY OPTION WIRED LAN NAME CHANGE LIVE MODE CUT INCOMPUTER SEARCHMULTI-LIVESTATUSINITIALIZE OFF PICTURE NETWORK S-MAPWIRELESS LAN PASSWORDOFFPASSWORD CHANGEOFFNETWORK STANDBYNETWORK CONTROLON
62 Using WebBrowser (cont.) Enabling JavaScript If JavaScript has been set to disable, enable it. 2Select [Security] and set the security level to [Default Level], or sele\ ct [Custom Level] and check the [Enable] checkbox under [Active scripting]. Open window. Click [Start] → [Control Panel] → [Network and Internet Connections] → [Internet Option].1 Accessing from the WebBrowser 1 Click [WEB CONTROL] on the launcher. Or start up the WebBrowser, and enter the IP address set by the projector. The WebBrowser starts up and the authentication window appears. 2Enter the user name and the password. 3Click [OK]. window appears. (Next page) • The default user mane and password settings are as follows: User name: user1 (with user authority) / admin1 (administrator authority) Password: panasonic (lower case) • Administrator authority has full access to the all features. User authority has access to “monitor information”, “projector contro\ l” and “password change”. (User authority has no access to “Detai\ led setting”.) • Password used in this page is for accessing the web control window. ( See page 68) This password is different from the password set in page 57 for accessing a projector. • The system locks for several minutes if an incorrect password is entered three times in succession. • If you reset the configuration to the factory default or the state of purchase, the password is reset to “panasonic”. Change the password to an appropriate one. • Make sure the password is as hard to guess as possible. • Change the password periodically. • If you have forgotten the password, perform [INITIALIZE] in the pro\ jector's network menu (See page 60), and set a new one in the “Password change” window of your WebBrowser. (See page 68) • Panasonic Corporation and its affiliated companies never directly ask customers for their password. Do not give out your password even if directly asked by a third-party representing themselves as Panasonic Corporation. • The top window may not appear depending on the WebBrowser. In this case start up WebBrowser again, or press the [Ctrl] + [R] keys for example to update the screen. • Connection cannot be made while the WebBrowser is set to dial-up network. Cancel the dial-up network setting. • It may take some moments for WebBrowser to start up.
63 Using WebBrowser (cont.) This page indicates the projector status. To access this page from other pages, click [Status] at the left of the w\ indow. Monitor information window The monitor information is refreshed at fixed intervals, but the current exact information can be checked by clicking [View] → [Refresh]. Projector status On this window, click the [Projector status] tab. Network status On this window, click the [Network status] tab. If [SELF TEST Error (Detail)] appears on the monitored information window, click it to view the error details. n If [FAILED] appears ItemDescription MAIN CPU BUSThere is a problem with a microcontroller circuit. Contact your dealer. FANThere is a problem with the fan or fan drive circuit. Contact your deale\ r. INPUT AIR TEMPERATUREInput air temperature is high. The projector is likely being used in a high temperature environment such as near heating equipment. OUTPUT AIR TEMPERATURETemperature surrounding the lamp is high. The exhaust vent is likely blocked. LAMP REMAIN TIMEThe lamp has been used for longer than its rated useful life, and it is \ time to replace it. LAMP STATUSThe lamp could not be lit. Allow the bulb of the light source to cool, and then turn on the project\ or. INPUT AIR TEMP.SENSORThere is a problem with the air intake temperature sensor. Contact your dealer. OUTPUT AIR TEMP.SENSORThere is a problem with the exhaust temperature sensor. Contact your dealer. BATTERYThe battery must be replaced. Contact your dealer. ACF UNITEither the ACF unit is not set properly or it does not work. For further detail, se\ e the instruction manual for the projector. FILTER REMAINThe remaining filter gets low. For further detail, see the instruction manual for the projector.
64 You can make various projector settings. If you migrate from other page, click [Projector control] in the main me\ nu (left of the window). Projector control window Basic control window On this window, click the [Basic control] tab. Advanced control window On this window, click the [Advanced control] tab. Using WebBrowser (cont.) Connection with the projector may not be possible immediately after the \ power is turned on. In this case wait a bit and then make the connection again.
65 Using WebBrowser (cont.) 3 Complete the detailed settings and click [Next]. When [Next] is clicked, the next page appears, enabling you to complete the detailed settings as desired. After all required items have been entered, a confirmation window appears. Making the above settings effective Select [WIRELESS LAN] in the network menu of the projector, and use the [] buttons to select the network set in this page. You can make detail network settings on projector, when connecting without the administrator authority or when connecting\ through an access point (infrastructure mode). LAN settings Detailed settings window 1Click [Detailed set up] in the menu. 2 Select the items to change and click [Next]. The settings window appears, showing the current settings. • To change the LAN settings, click [Change]. • To return to the previous window, click [Back]. Settings in this page are the same when setting [USER 1] - [USER 3] from network menu of the projector. (See page 54) • Important video/audio data is protected because AES※ encryption processing takes place in advance for all network numbers, even if [ENCRYPTION] is set to [NONE]. ※ “Glossary” (See page 72) • If you have changed the LAN settings that are currently in use, the connection may break off. 4 Click [Submit]. The settings will be registered.
66 Time settings Click [Detailed set up]→[Adjust clock] in the menu. Time zone : Select the time zone and click [Set time zone]. Time : Enter the current date and time in [Date] and [Time], and then click [Set date and time]. Email settings You can specify two email recipients. Click [Detailed set up]→[E-mail set up] in the menu. • [MAIL SERVER] ENABLE : Enable or disable email transmission. SMTP SERVER NAME : Enter the SMTP server name. • [MAIL OPTION] MAIL FROM : Enter the sender’s email address. MEMO : Enter a description of the sender. • [TEMPERATURE WARNING SET UP] MINIMUM TIME : Enter the interval for sending email. INPUT AIR TEMPERATURE: Select the temperature of the intake sensor at which to send a warning message. • [E-MAIL ADDRESS] E-MAIL ADDRESS : Enter the email addresses of the recipients. MAIL CONTENTS : Change the type of message as desired. When sending messages to mobile phones, select “SIMPLE.” ERROR : Select ON to send email when errors occur. LAMP RUNTIME : Select ON to send email when “at REMAIN” is reached. FILTER REMAINING TIME : Select ON to send email when “at REMAIN” is reached. INPUT AIR TEMPERATURE: Select ON to send email when the temperature set in [TEMPERATURE WARNING SET UP] is exceeded. PERIODIC REPORT : Send a message with the projector status at the selected date and time. When [submit] is clicked, the settings are applied. Using WebBrowser (cont.) Connection test You can confirm if a network connection is established with Mail server, POP server, DNS server or the like. Click [Detailed setup] → [Ping test] from the network main menu. Destination IP address: Enter the IP address of the server you want to test, and then click [Submit]. If succeeded in connection, the following display appears. If failed in connection, the following display appears.
67 Using WebBrowser (cont.) ※Example of email message sent If [NORMAL] is selected under [MAIL CONTENTS] A If you have completed the email settingsB If an error occurs If [SIMPLE] is selected under [MAIL CONTENTS] C If you have completed the email settingsD If an error occurs G $S@==[aaRZ]R_Nab_R $dN_[V[T $`Rab] $ZV[VZbZ $aVZR $V[]ba $NV_ $aRZ]R_Nab_R $ $\ƒr $h $@?P $G== $ $h $\[ $ $j $=?G== $ $h $\[ $ $j $=@G== $ $h $\[ $ $j $=AG== $ $h $\[ $ $j $=BG== $ $h $\[ $ $j $=CG== $ $h $\[ $ $j $=DG== $ $h $\[ $ $j $=EG== $ $h $\[ $ $j $=FG== $ $h $\[ $ $j $>=G== $ $h $\[ $ $j $>>G== $ $h $\[ $ $j $>?G== $ $h $\[ $ $j $>@G== $ $h $\[ $ $j $>AG== $ $h $\[ $ $j $>BG== $ $h $\[ $ $j $>CG== $ $h $\[ $ $j $>DG== $ $h $\[ $ $j $>EG== $ $h $\[ $ $j $>FG== $ $h $\[ $ $j $?=G== $ $h $\[ $ $j $?>G== $ $h $\[ $ $j $??G== $ $h $\[ $ $j $?@G== $ $h $\[ $ $j $ZNV[ $P]b $Ob` $ $ h $\X $jSN[ $ $ $ $ h $\X $jV[]ba $NV_ $aRZ]R_Nab_R $h $\X $j\ba]ba $NV_ $aRZ]R_Nab_R $h $\X $jYNZ] $_RZNV[ $aVZR $ $ h $\X $jYNZ] $`aNab` $ $ $ h $\X $jV[]ba $NV_ $aRZ];`R[`\_ $h $\X $j\ba]ba $NV_ $aRZ];`R[`\_ $h $\X $jONaaR_f $ $ $ h $\X $jNPS $b[Va $ $ $ h $\X $jSVYaR_ $_RZNV[ $h $\X $j5R| $p|qr $== $== $== $== $== $== $== $==6G:AA $qrtP $;==;= $[Rad\_X $cR_`V\[ $>;== $YNZ] $`aNab` $YNZ]J\SSV[]ba $`VT[NY $[Rad\_X $::: $:::xU‡ $=;CF;>=A;>E@ZNP $nqqr€€ $ $==GA=GC@G==G==G>?V] $nqqr€€ $>CF;?BA;?>@;>FDZNP $nqqr€€ $ $==G=RG>=G=?GCRGDR drq $`r} $>D $>@GABGA? $?==E::::: $Zrz| $::::: ZNV[ $P]b $Ob` $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $h $SNVYRQ $jSN[ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $h $ $ $\X $ $ $jV[]ba $NV_ $aRZ]R_Nab_R $ $ $ $ $ $ $ $ $h $ $ $\X $ $ $j\ba]ba $NV_ $aRZ]R_Nab_R $ $ $ $ $ $ $ $h $ $ $\X $ $ $jYNZ] $_RZNV[ $aVZR $ $ $ $ $ $ $ $ $ $ $ $ $ $h $ $ $\X $ $ $jYNZ] $`aNab` $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $h $SNVYRQ $jV[]ba $NV_ $aRZ];`R[`\_ $ $ $ $ $ $ $ $ $h $SNVYRQ $j\ba]ba $NV_ $aRZ];`R[`\_ $ $ $ $ $ $ $ $h $ $ $\X $ $ $jONaaR_f $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $h $ $ $\X $ $ $jNPS $b[Va $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $h $SNVYRQ $jSVYaR_ $_RZNV[ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $h $ $ $\X $ $ $j5R| $p|qr $EA $AA $== $== $>= $== $== $=A6 `Ra $_b[aVZR $ $ $ $ $ $ $>FA $UYNZ] $ $UVTU $ $ $ $ $ $ $ $ $@C $UYNZ] $ $_RZNV[ $ $ $ $ $AFCA $U ^bN[aVaf $ $ $ $ $ $ $ $ $ $ $ $= $2N]]\_\e; $aVZR $ $ $ $ $ $ $= $U ZNV[ $cR_`V\[ $ $ $ $ $ $ $ $ $>;==;=[Rad\_X $cR_`V\[ $ $ $ $ $ $>;===YNZ] $`aNab` $ $ $ $ $ $ $ $ $ $YNZ]J\SSV[]ba $`VT[NY $ $ $ $ $ $ $ $ $[Rad\_X $ $ $::: $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $:::xU‡ $=;CF;>=A;>E@ZNP $nqqr€€ $ $==GA=GC@G==G==G>? V] $nqqr€€ $ $ $>CF;?BA;?>@;>FDZNP $nqqr€€ $ $==G=RG>=G=?GCRGDR drq $`r} $>D $>@GABGA? $?==E ::::: $Zrz| $::::: [ F300NT ][ F300NT ]
68 Using WebBrowser (cont.) Password settings Click [Change password] in the main menu. Set a password for access of the [Projector control window]. Enter the previous password and the new password. Enter the new password in [Retype] and click [OK]. Authentication server settings Click [Detailed set up]→[Authentication set up] in the menu. Auth : Change the authentication method as desired. SMTP Auth : For SMTP authentication, change the authentication method to use, as desired. Pop Server name : Enter the POP server name. User name : Enter the user name for the SMTP or POP server. Password : Enter the password for the SMTP or POP server. SMTP server port : Enter the SMTP server port number. POP server port : Enter the POP server port number. • You can enter a password up to 16 characters (upper case/lower case) and symbols. • You can reset the password of users with user authority, when you logged in as administrator. Command port settings In the main menu, click [Detailed set up] and [Command port setting]. Command port : Specify a port number to be used for command control. Switch the language of the WEB control window. To access this page from other pages, click [English] [日本語] at the main menu. Switching Languages
69 Using PJLink™ protocol The projector’s network functions conform to PJLink™ Class 1 standards, enabling th\ e following operations from a computer using the PJLink™ protocol. • Setting the projector • Querying the projector status The following commands are used to control the projector with the PJLink\ ™ protocol. CommandControl detailsNotes POWRPower control Parameters 0 = Standby 1 = On POWR ?Power status query Parameters 0 = Standby 1 = On 2 = Cooling down 3 = Warming up INPTInput switchingParameters 11 = COMPUTER1 12=COMPUTER2 21 = VIDEO 22=S-VIDEO 31 = DVI 51 = NETWORKINPT ? Input switching query AVMTAV mute controlParameters 30 = AV mute off (video mute cancelled) 31 = AV mute on (video mute)AVMT ? AV mute status query ERST? Error status query Parameters 1st byte : Indicates fan errors; a number from 0 to 2 2nd byte : Indicates lamp errors; a number from 0 to 2 3rd byte : Indicates temperature errors; a number from 0 to 2 4th byte : Fixed at 0 5th byte : Indicates filter errors; a number from 0 to 2 6th byte : Indicates other errors; a number from 0 to 2 Numbers from 0 to 2 indicate the following 0 = No error detected 1 = Warning 2 = Error LAMP ? Lamp status query Parameters 1st number (1–5 digits): Cumulative hours of lamp use 2nd number: 0 = lamp off; 1 = lamp lit INST ? Input switching list queryThe following values are returned in this parameter “11 12 21 22 23 51” NAME ? Projector name queryReturns the name set in “HOSTNAME※,” in “NETWORK” ※The “HOSTNAME” is the projector name set in the projector itself. INF1 ?Manufacturer name queryReturns “Panasonic” INF2 ?Model name queryReturns "F300NT" / "FW300NT" (Answer the name of the projector in use.) INFO ? Query for other informationReturns the version number or similar identification CLSS ?Class information queryReturns “1” PJLink™ security authentication The password used for PJLinkTM is same as the one you set in the Web control. Configure this without specifying the password for the Web control, if you use it without authentication. PJLink™ is a pending trademark in Japan, the United States and other \ countries and regions. For details on PJLink™ specifications, refer to the Japan Business Machine and Information Syst\ em Industries Association website. The URL is http://pjlink.jbmia.or.jp/english/ To use PJLink™ protocol, select [ON] to turn on the [NETWORK CONTROL] \ of the projector. (See page 58) Applicable commands
70 Software Uninstall Wireless Manager ME 5.5 From the desktop, select [Start] → [All Programs] → [Panasonic Wireless Display] → [Uninstall Wireless Manager mobile edition 5.5]. Follow the instructions appearing on the screen and uninstall the softwa\ re.