Panasonic Network PT-F300 Operation Manual
Here you can view all the pages of manual Panasonic Network PT-F300 Operation Manual. The Panasonic manuals for Software are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
31
Other operations for connection (cont.)
Click [Search].
When window – [Searching] is displayed, the search sta\
rts.3
Click [Connect].
When the connection with the projector is established, the launcher is
displayed.
(“Description of the launcher” →
See page 33)
5
Check the search results.
When the projector of the applicable ID is found, the [Projector Name] a\
nd [ID]
appear.
4
Other search
Searching
CloseConnectConnectability
Other search
Projector detected.
Projector Name
Name1234Proj1234...](http://img.usermanuals.tech/thumb/58/75783/w300_pt-f300_en_network_om_d-30.png "Page 31
31
Other operations for connection (cont.)
Click [Search].
When window – [Searching] is displayed, the search sta\
rts.3
Click [Connect].
When the connection with the projector is established, the launcher is
displayed.
(“Description of the launcher” →
See page 33)
5
Check the search results.
When the projector of the applicable ID is found, the [Projector Name] a\
nd [ID]
appear.
4
Other search
Searching
CloseConnectConnectability
Other search
Projector detected.
Projector Name
Name1234Proj1234...")
31 Other operations for connection (cont.) Click [Search]. When window – [Searching] is displayed, the search sta\ rts.3 Click [Connect]. When the connection with the projector is established, the launcher is displayed. (“Description of the launcher” → See page 33) 5 Check the search results. When the projector of the applicable ID is found, the [Projector Name] a\ nd [ID] appear. 4 Other search Searching CloseConnectConnectability Other search Projector detected. Projector Name Name1234Proj1234...
Page 32
![Page 32
32
Click [] on the launcher.
The following window appears.1
Click [Yes].
The computer returns to the original network settings when the connectio\
n is ended.
However, note that some time may be needed to return to the original network se\
ttings.
Click [No] to return to the launcher.
2
Other operations for connection (cont.)
• When the launcher is minimized, right click [] on the notification area to display pop up menu and click [End].
• You can also exit by selecting [End] from the launcher menu....](http://img.usermanuals.tech/thumb/58/75783/w300_pt-f300_en_network_om_d-31.png "Page 32
32
Click [] on the launcher.
The following window appears.1
Click [Yes].
The computer returns to the original network settings when the connectio\
n is ended.
However, note that some time may be needed to return to the original network se\
ttings.
Click [No] to return to the launcher.
2
Other operations for connection (cont.)
• When the launcher is minimized, right click [] on the notification area to display pop up menu and click [End].
• You can also exit by selecting [End] from the launcher menu....")
32 Click [] on the launcher. The following window appears.1 Click [Yes]. The computer returns to the original network settings when the connectio\ n is ended. However, note that some time may be needed to return to the original network se\ ttings. Click [No] to return to the launcher. 2 Other operations for connection (cont.) • When the launcher is minimized, right click [] on the notification area to display pop up menu and click [End]. • You can also exit by selecting [End] from the launcher menu....
Page 33
![Page 33
33
The launcher always appears on the computer screen, and can be used to p\
erform various operations.
• If the launcher has been minimized to the task tray, right click the [
] icon to display the launcher menu and operate the
launcher.
• To return the launcher from the task tray, double-click the [
] icon, or select “Display menu bar” from the menu.
• The launcher can be dragged to any position in the screen.
Description of the launcher
Various projection methods
Status indication
A Status :...](http://img.usermanuals.tech/thumb/58/75783/w300_pt-f300_en_network_om_d-32.png "Page 33
33
The launcher always appears on the computer screen, and can be used to p\
erform various operations.
• If the launcher has been minimized to the task tray, right click the [
] icon to display the launcher menu and operate the
launcher.
• To return the launcher from the task tray, double-click the [
] icon, or select “Display menu bar” from the menu.
• The launcher can be dragged to any position in the screen.
Description of the launcher
Various projection methods
Status indication
A Status :...")
33 The launcher always appears on the computer screen, and can be used to p\ erform various operations. • If the launcher has been minimized to the task tray, right click the [ ] icon to display the launcher menu and operate the launcher. • To return the launcher from the task tray, double-click the [ ] icon, or select “Display menu bar” from the menu. • The launcher can be dragged to any position in the screen. Description of the launcher Various projection methods Status indication A Status :...
Page 34
![Page 34
34
Various projection methods (cont.)
Operating Button
A Launcher menu button: The launcher menu will appear. You can operate it by clicking the various items.
[Start/Pause]: Starts/pauses projecting.
[Stop]: Stops projecting.
[Live Mode]:
The live mode menu will appear. Set a projection position for live mode. (
See pages 35 - 36)
[Selective Area Transmission]: By using the selective area window, you can specify the necessary information alone from the
computer screen, and display it on the...](http://img.usermanuals.tech/thumb/58/75783/w300_pt-f300_en_network_om_d-33.png "Page 34
34
Various projection methods (cont.)
Operating Button
A Launcher menu button: The launcher menu will appear. You can operate it by clicking the various items.
[Start/Pause]: Starts/pauses projecting.
[Stop]: Stops projecting.
[Live Mode]:
The live mode menu will appear. Set a projection position for live mode. (
See pages 35 - 36)
[Selective Area Transmission]: By using the selective area window, you can specify the necessary information alone from the
computer screen, and display it on the...")
34 Various projection methods (cont.) Operating Button A Launcher menu button: The launcher menu will appear. You can operate it by clicking the various items. [Start/Pause]: Starts/pauses projecting. [Stop]: Stops projecting. [Live Mode]: The live mode menu will appear. Set a projection position for live mode. ( See pages 35 - 36) [Selective Area Transmission]: By using the selective area window, you can specify the necessary information alone from the computer screen, and display it on the...
Page 35
![Page 35
35
Various projection methods (cont.)
Press the [MULTI-LIVE] button on the remote control to turn the projection screen
into a full screen display (the status when no index window (small scr\
eens) is
displayed). (See page 36)
If you press the [MULTI-LIVE] button once or twice when index windows are displayed on the pr\
ojection screen, the
screen will switch over to a full screen display.
1
Check the status indication on the launcher to make sure that
transmission is possible (). (See page 33)2...](http://img.usermanuals.tech/thumb/58/75783/w300_pt-f300_en_network_om_d-34.png "Page 35
35
Various projection methods (cont.)
Press the [MULTI-LIVE] button on the remote control to turn the projection screen
into a full screen display (the status when no index window (small scr\
eens) is
displayed). (See page 36)
If you press the [MULTI-LIVE] button once or twice when index windows are displayed on the pr\
ojection screen, the
screen will switch over to a full screen display.
1
Check the status indication on the launcher to make sure that
transmission is possible (). (See page 33)2...")
35 Various projection methods (cont.) Press the [MULTI-LIVE] button on the remote control to turn the projection screen into a full screen display (the status when no index window (small scr\ eens) is displayed). (See page 36) If you press the [MULTI-LIVE] button once or twice when index windows are displayed on the pr\ ojection screen, the screen will switch over to a full screen display. 1 Check the status indication on the launcher to make sure that transmission is possible (). (See page 33)2...
Page 36
![Page 36
36
Various projection methods (cont.)
Multi live mode has “4-screen multi style”, “4-screen index sty\
le” and “16-screen index style”.
How to operate
Press the [MULTI-LIVE] button of the remote control to change the style.
Multi Live Mode
• 4-screen index style (See page 38)
Display the indexes (small screens) of up to four computer screens, and
make one of these screens an enlarged display. You can also temporarily
switch over to a full screen display.
• 16-screen index style (
See page 40)...](http://img.usermanuals.tech/thumb/58/75783/w300_pt-f300_en_network_om_d-35.png "Page 36
36
Various projection methods (cont.)
Multi live mode has “4-screen multi style”, “4-screen index sty\
le” and “16-screen index style”.
How to operate
Press the [MULTI-LIVE] button of the remote control to change the style.
Multi Live Mode
• 4-screen index style (See page 38)
Display the indexes (small screens) of up to four computer screens, and
make one of these screens an enlarged display. You can also temporarily
switch over to a full screen display.
• 16-screen index style (
See page 40)...")
36
Various projection methods (cont.)
Multi live mode has “4-screen multi style”, “4-screen index sty\
le” and “16-screen index style”.
How to operate
Press the [MULTI-LIVE] button of the remote control to change the style.
Multi Live Mode
• 4-screen index style (See page 38)
Display the indexes (small screens) of up to four computer screens, and
make one of these screens an enlarged display. You can also temporarily
switch over to a full screen display.
• 16-screen index style (
See page 40)...
Page 37
![Page 37
37
Various projection methods (cont.)
Check the status indication on the launcher to make sure that transmissi\
on is
possible (). (See page 33)2
Press the [MULTI-LIVE] button on the remote control to turn the projection screen
into a full screen display (the status when no index window (small scr\
eens) is
displayed). (See page 36)
If you press the [MULTI-LIVE] button once or twice when index windows are displayed on the pr\
ojection screen, the
screen will switch over to a full screen display.
1...](http://img.usermanuals.tech/thumb/58/75783/w300_pt-f300_en_network_om_d-36.png "Page 37
37
Various projection methods (cont.)
Check the status indication on the launcher to make sure that transmissi\
on is
possible (). (See page 33)2
Press the [MULTI-LIVE] button on the remote control to turn the projection screen
into a full screen display (the status when no index window (small scr\
eens) is
displayed). (See page 36)
If you press the [MULTI-LIVE] button once or twice when index windows are displayed on the pr\
ojection screen, the
screen will switch over to a full screen display.
1...")
37 Various projection methods (cont.) Check the status indication on the launcher to make sure that transmissi\ on is possible (). (See page 33)2 Press the [MULTI-LIVE] button on the remote control to turn the projection screen into a full screen display (the status when no index window (small scr\ eens) is displayed). (See page 36) If you press the [MULTI-LIVE] button once or twice when index windows are displayed on the pr\ ojection screen, the screen will switch over to a full screen display. 1...
Page 38
![Page 38
38
Various projection methods (cont.)
When the projector is set to “4-screen index style”, connect up to\
4 computers to one projector, and then simultaneously display
the screens for the 4 computers on the index windows and also on a large\
screen.
(If the connection is completed, and input is via network.)
Check the status indication on the launcher to make sure that transmissi\
on is
possible (). (See page 33)2
Press the [MULTI-LIVE] button of the remote control to switch the projection screen...](http://img.usermanuals.tech/thumb/58/75783/w300_pt-f300_en_network_om_d-37.png "Page 38
38
Various projection methods (cont.)
When the projector is set to “4-screen index style”, connect up to\
4 computers to one projector, and then simultaneously display
the screens for the 4 computers on the index windows and also on a large\
screen.
(If the connection is completed, and input is via network.)
Check the status indication on the launcher to make sure that transmissi\
on is
possible (). (See page 33)2
Press the [MULTI-LIVE] button of the remote control to switch the projection screen...")
38 Various projection methods (cont.) When the projector is set to “4-screen index style”, connect up to\ 4 computers to one projector, and then simultaneously display the screens for the 4 computers on the index windows and also on a large\ screen. (If the connection is completed, and input is via network.) Check the status indication on the launcher to make sure that transmissi\ on is possible (). (See page 33)2 Press the [MULTI-LIVE] button of the remote control to switch the projection screen...
Page 39
![Page 39
39
Quitting the 4-screen index style projection
Click [] on the launcher.
Various projection methods (cont.)
Enlarged display
• Use the [] buttons on the remote control to move the focus (yellow box) to the \
image to be
enlarged, and press the [ENTER] button. The image is enlarged and displayed at the top of the
projection screen.
• The image display will fill the entire screen if the [ENTER] button is pressed again.
• To return to the 4-screen index style, press the [ENTER] button again.
•...](http://img.usermanuals.tech/thumb/58/75783/w300_pt-f300_en_network_om_d-38.png "Page 39
39
Quitting the 4-screen index style projection
Click [] on the launcher.
Various projection methods (cont.)
Enlarged display
• Use the [] buttons on the remote control to move the focus (yellow box) to the \
image to be
enlarged, and press the [ENTER] button. The image is enlarged and displayed at the top of the
projection screen.
• The image display will fill the entire screen if the [ENTER] button is pressed again.
• To return to the 4-screen index style, press the [ENTER] button again.
•...")
39 Quitting the 4-screen index style projection Click [] on the launcher. Various projection methods (cont.) Enlarged display • Use the [] buttons on the remote control to move the focus (yellow box) to the \ image to be enlarged, and press the [ENTER] button. The image is enlarged and displayed at the top of the projection screen. • The image display will fill the entire screen if the [ENTER] button is pressed again. • To return to the 4-screen index style, press the [ENTER] button again. •...
Page 40
![Page 40
40
Various projection methods (cont.)
Check the status indication on the launcher to make sure that transmissi\
on is
possible (). (See page 33)2
Press the [MULTI-LIVE] button of the remote control to switch the projection screen
to “16-screen index style”. (See page 36)1
Click [] on the launcher.
The computer images are automatically sent to the empty windows on the 1\
6-screen display.
Display position is not selectable.
3
Enlarged display
• Use the [▲▼] buttons on the remote control to move the...](http://img.usermanuals.tech/thumb/58/75783/w300_pt-f300_en_network_om_d-39.png "Page 40
40
Various projection methods (cont.)
Check the status indication on the launcher to make sure that transmissi\
on is
possible (). (See page 33)2
Press the [MULTI-LIVE] button of the remote control to switch the projection screen
to “16-screen index style”. (See page 36)1
Click [] on the launcher.
The computer images are automatically sent to the empty windows on the 1\
6-screen display.
Display position is not selectable.
3
Enlarged display
• Use the [▲▼] buttons on the remote control to move the...")
40 Various projection methods (cont.) Check the status indication on the launcher to make sure that transmissi\ on is possible (). (See page 33)2 Press the [MULTI-LIVE] button of the remote control to switch the projection screen to “16-screen index style”. (See page 36)1 Click [] on the launcher. The computer images are automatically sent to the empty windows on the 1\ 6-screen display. Display position is not selectable. 3 Enlarged display • Use the [▲▼] buttons on the remote control to move the...