Panasonic Network PT-F300 Operation Manual

21

Connecting with wireless LAN (cont.)
3Select the projector to connect.
 window appears. 
 Operations on the projector
A  Turn on the power to the projector unit.
B   Press the [COMPUTER SEARCH] button on the remote control. 
(You can also search from [COMPUTER SEARCH] from the network menu. 
→	
See page 59) 
  The computers that can be connected to the projector are displayed in a \
list.
C   Select from the list displayed on the projector an item with the same icon/
user name as is displayed on the...

22

Detected issueDisplayed informationRemarksReference page
A firewall or 
network bridge is 
detected
[****]※ is installed. 
When destination cannot be 
identified, deactivate [****] which is 
the cause.• 
Has your firewall in Windows XP been disabled?
•  Is Wireless Manager mobile edition 5.5 registered 
in	[Exceptions]	([Control	Panel]	→	[Security	Center]	
→	[Windows	firewall])	with	the	Windows	XP 	SP	2?
•  Is this software registered in the [Exceptions] tab 
in [Control Panel] – [Windows Firewall]...

23

Detected issueDisplayed informationRemarksReference page
When a change in 
the settings made 
by the utility has 
been detected 
The settings of Wireless Network 
connection have been changed.
When a Wireless LAN Card utility or 
any other utilities are active, 
stop the operation of such utilities, 
then restart the Wireless Manager 
ME 5.5.
The wireless LAN card utility used by the computer 
may have changed the wireless settings. 
Close the utility, and then make the connection again 
using Easy...

24

You can make the setting for infrastructure mode※ (connection through the access point※); however, confirm to your system 
administrator on network settings before changing any settings.
※“Glossary” (See pages 71 - 72)
A Projector settings
1Turn on the projector and press the [NETWORK] button on the remote contro\
l.
2
Press the menu button to open the [NETWORK] menu, and then select from a\
mong 
[USER 1] through [USER 3] for [WIRELESS LAN] and press [ENTER].
3
Set the details of network and select...

25

Before getting started Wireless Manager ME 5.5, the PC's IP setting must be set to [Acquire IP address automatically]. Before 
use, contact your network administrator to make sure the proper setting.\
A Projector settings 
When logging on without administrator authority 
1Turn on the projector and press the [NETWORK] button on the remote contro\
l.
2Press the menu button to open the [NETWORK] menu, and then select from among 
[USER 1] through [USER 3] for [WIRELESS LAN] and press [ENTER].
3
In...

26

7
Click [Start], [Network Connections], [Wireless Network Connection] and select 
the wireless network for which you have specified [SSID] in step 4, and \
then click 
[Connect].

When using Windows [Wireless Network Connection] to connect with the pro\
jector whose [SSID] is [Panasonic 
Projector]
9
Select a projector you want to connect on the  Window ([S-MAP] 
or [1-4/U]), and click [Connect]. (See pages 18, 19)
6Log on with the user who operates Wireless Manager ME 5.5.
B Computer operation (For...

27

Connecting with wireless LAN (cont.)
7
Click [Start] and [Connection], and select the wireless network for whic\
h you have 
specified [SSID] in step 4, and then click [Connect].

When using Windows [Network Connection] to connect with the projector wh\
ose [SSID] is [Panasonic Projector]
9
Select a projector you want to connect on the  Window ([S-MAP] 
or [1-4/U]), and click [Connect]. (See pages 18, 19)
For information on how to connect with projectors, refer to item 9 in [B Computer operation...

28

Press the menu button to open the [NETWORK] menu, select [Wired LAN] and then 
press [OK].
Connecting with Wired LAN
Connection can be made with wired LAN. However, confirm to your system administrator on network settings before changi\
ng 
any settings.
A Projector settings
1Turn on the projector and press the [NETWORK] button on the remote contro\
l.
2
3
Set the details of network and select [ENTER].
As for network setting items, see page 53.
Confirm to your system administrator before changing...

29

• Refer to the models on page 48 supporting the wired LAN that is compatible with this software.
•  If you want to enable the network adapter after starting the Wireless Manager, you should do it after exiting Wireless Manager.
Selection of adapters
When the  window appears, select [Wireless LAN] or [Wired LAN] \
and click [OK].
A  When the wired LAN is not connected and a wireless LAN is available (Disconnected)
    Connects to the wireless LAN. (
See page 15)
B  When the wired LAN is connected...

30

Other operations for connection
l When using “Search by IP address”
A  Enter the IP address (including its periods).
    Example: 192.168.10.100
B Select [Search by IP address]
l  When using “Search by domain name”
A  Enter the domain name.
B  Select [Search by domain name].
l  When using “Search by ID”
A  Enter the ID.
B  Select [Search by ID].
Enter the information of the projector you want to 
search for, and select the search criteria.2
Click [] at the  window.
 window appears.1
Apart from “Easy...