Panasonic Network Camera Wv Sfv481 Operating Instructions

							Browse[Start] button
The selected image will be downloaded onto the PC. Before downloading images, designate the destination
directory in advance. ( ®page 92)
The following window will be displayed when the [Start] button is clicked.
Select the image to be downloaded, and then click the [OK] button.
• All: All images saved at the selected time and date will be downloaded.
• Current image:  Only the currently displayed image will be downloaded.
• Download range:  Images in the specified range will be downloaded.
Note
•When the [Cancel ] button is clicked in the process of the download, the download will be canceled. In
this case, images already downloaded before clicking the [Cancel] button will be saved on the PC.
[Browse] button
When successfully logged in after the user authentication process, a folder on the SD memory card in which
images are saved will be displayed. ( ®page 76)
Operating Instructions51
7 Playback of images on the SD memory card   
						

							7.2  Playback “H.264(1)”/“H.264(2)” images saved to
the SD memory card
IMPORTANT •Depending on the network environment, download of video data may fail.
Slider bar
By operating the slider bar, you can select where to start playing images from. The slider bar can only be
used before playing images, or when playing is paused or stopped.
[PAUSE] button
Playback will be paused when this button is clicked during playback.
[PLAY] button
When this button is clicked, recorded data will be played.
Note
•If audio is recorded, it can be played back, but the image and audio will not be synchronized. Therefore,
images and audio may not always match. When data is being recorded to the SD memory card, audio
may sound as if it is cutting out and the audio quality may be reduced.
• When recorded audio is played back, the refresh interval of live images and playback may become
slow.
• Recorded audio is not played back when “Off” or “Interactive(Half-duplex)” is selected for “Audio
mode” on the [Audio] tab of the “Image/Audio” page.
• Audio is only played for users who belong to the access level selected for “Permission level of audio
trans./recep.” on the [Audio] tab of the “Image/Audio” page.
[FF] button
Each time this button is clicked, the playback speed will change. When the [ PLAY] button is clicked during fast
playback, playback speed will return to the normal playback speed.
52Operating Instructions
7 Playback of images on the SD memory cardA     
						

							Note•The maximum speed of the fast playback varies depending on the setting of “Max bit rate” - “H.264
recording”  of the SD memory card. If any of the following also applies to  “Transmission priority ” or  “Max
bit rate (per client)” on the [JPEG/H.264] tab of the “Image/Audio” page, playback speed becomes
constant (x1), not fast playback.
– When “Frame rate”  or “Advanced VBR”  is selected for “Transmission priority” , and “14436kbps” or
a higher value is selected for the maximum value of “Max bit rate (per client)”
– When “Constant bit rate” is selected for “Transmission priority”, and “16384kbps” is selected for
the maximum value of “Max bit rate (per client)”
• Recorded audio will not be played back during fast playback.
[5s backward] button
Each time this button is clicked, the recorded data goes back by 5 seconds and starts playing.
[5s forward] button
Each time this button is clicked, the recorded data goes forward by 5 seconds and starts playing.
[STOP] button
Playback will stop and the “Playback” window will turn to the “Live” page.
[Time]
Time and date when each log has been recorded will be displayed.
[Duration]
Displays the period of time that the data has been recorded on the SD memory card.
[Event]
The event type will be displayed.
• MN/SC:  Log by “Manual/Schedule”
• TRM1:  Alarm by alarm input to Terminal 1
• TRM2:  Alarm by alarm input to Terminal 2
• TRM3:  Alarm by alarm input to Terminal 3
• VMD:  Alarm by VMD alarm
• COM:  Alarm by command alarm
Browse [Start] button
The selected image will be downloaded onto the PC.
Before downloading images, designate the destination directory in advance. ( ®page 92)
The message window will be displayed to ask if it is OK to start download when the [Start] button is clicked.
Click the [OK] button.
Note
•When the [Cancel ] button is clicked in the process of the download, the download will be canceled. In
this case, video data already downloaded before clicking the [ Cancel] button will be saved on the PC.
• Video data are saved in the files of approx. 20 MB. When the file size of video data is more than 20
MB, two or more files will be downloaded.
• It is possible to play back video data saved on the PC using such applications as QuickTime Player or
Windows Media ®
 Player *1
. However, we are not liable for performance relating to these applications.
Operating Instructions53
7 Playback of images on the SD memory card 
						

							•Depending on the status of the SD memory card, QuickTime Player, or Windows Media Player, video
data cannot be played back.
*1 The supported operating systems are Windows 8.1, Windows 8, and Windows 7 only.
54Operating Instructions
7 Playback of images on the SD memory card  
						

							8   About the network security
8.1  Equipped security functions The following security functions are featured in this camera.
Access restrictions by the host authentication and the user authentication
It is possible to restrict users from accessing the camera by setting the host authentication and/or the user
authentication to “On”. ( ®page 154, page 155)
Access restrictions by changing the HTTP port
It is possible to prevent illegal access such as port scanning, etc. by changing the HTTP port number.
( ® page 161)
Access encryption by the HTTPS function
It is possible to enhance the network security by encrypting the access to cameras using the HTTPS
function. ( ®page 177)
IMPORTANT
•Design and enhance security countermeasures to prevent leakage of information such as image data,
authentication information (user name and password), alarm E-mail information, FTP server
information, DDNS server information, etc. Perform the countermeasure such as access restriction
(using the user authentication) or access encryption (using the HTTPS function).
• After the camera is accessed by the administrator, make sure to close the browser for added security.
• Change the administrator password periodically for added security.
Note
•When user authentication  (authentication error) has failed to pass 8 times within 30 seconds using the
same IP address (PC), access to the camera will be denied for a while.
Operating Instructions55
8 About the network security    
						

							9   Display the setup menu from a PCThe settings of the camera can be configured on the setup menu.
IMPORTANT•The setup menu is only operable by users whose access level is “1. Administrator”. Refer to
page 154 for how to configure the access level.
9.1  How to display the setup menu 1.Display the “Live” page. ( ®page 7)
2. Click the [Setup] button on the “Live” page.
→ The window with the user name and password entry fields will be displayed.
3.Click the [OK] button after entering the user name and the password.
The default user name and password are as follows.
User name: admin
Password: 12345
56Operating Instructions
9 Display the setup menu from a PC   
						

							→The setup menu will be displayed. Refer to page 60 for further information about this menu.Operating Instructions57
9 Display the setup menu from a PC   
						

							9.2  How to operate the setup menu
Menu buttons
Setup page
1. Click the desired button in the frame on the left of the window to display the respective setup menu.
When there are tabs at the top of the  “Setup” page displayed in the frame on the right of the window, click
the desired tab to display and configure the setting items relating to the name of the tab.
2. Complete each setting item displayed in the frame on the right of the window.
3. After completing each setting item, click the [Set] button to apply them.
IMPORTANT
•When there are two or more [Set], [Register], and [Execute] buttons on the page, click the respective
button to the edited setting item.
58Operating Instructions
9 Display the setup menu from a PCAB     
						

							
When completing the setting items in field A, click the [Set] button ( B) below field ( A).
The edited settings in field  A will not be applied unless the [ Set] button  (B ) below field  (A ) is clicked.
In the same manner as above, click the [Set] button ( D) below field  C when completing the setting
items in field  C.
Operating Instructions59
9 Display the setup menu from a PCA B C D   
						

							9.3  About the setup menu window
[Setup] button
Display the “Setup” page.
[Live] button
Display the “Live” page.
[Basic] button
Displays the “Basic” page. The basic settings such as time and date and camera title, and the settings
relating to the SD memory card can be configured on the “Basic” page. ( ®page 62)
[Image/Audio] button
Displays the  “Image/Audio”  page. The settings relating to image quality, image capture size, etc. of JPEG/
H.264 camera images can be configured on the “Image/Audio” page. ( ®page 94)
[Multi-screen] button
Displays the “Multi-screen” page. The cameras from which images are to be displayed on a multi-screen
can be registered on the “Multi-screen” page. ( ®page 132)
[Alarm] button
Displays the  “Alarm” page. The settings for alarm actions at alarm occurrences, VMD area, and the alarm
occurrence notifications can be configured on the “Alarm” page. ( ®page 134)
60Operating Instructions
9 Display the setup menu from a PCAB C E F G H I
D J K
L