Panasonic Network Camera Wv Sfv481 Operating Instructions

							Note•It is necessary to configure the network settings of the mobile terminal in advance to connect to the
Internet and monitor images from the camera. ( ®page 159)
1. Access to  “http://IP address /cam”*1
 or  “http://Host name registered in the DDNS server /cam” using a mobile
terminal.
→ Images from the camera will be displayed.
Note
•When “Quad stream” is selected for “Image capture mode”, images cannot be displayed.
• When the “Image capture mode” type is “2 Monitor” , the types of images configured in the “Image
capture size” of “"Live" page (Initial display)” are displayed.
Live images area
Displays images from the camera.
Operation buttons area
When functions are selected in the function selection area  D, buttons to operate those functions are
displayed.
Zoom operation area
When the image type is Quad PTZ or Single PTZ, buttons to operate the zoom are displayed.
Function selection area
When functions that can be operated are selected, operation buttons are displayed in the operation
buttons area  B.
Operating Instructions31
2 Monitor images on a cellular phone/mobile terminalA
B
C
D        
						

							2.Click the button of the function that you want to operate.
Pan/tilt *3
Preset*3
Resolution control
AUX control
Zoom display *3
Each function is explained below.
32Operating Instructions
2 Monitor images on a cellular phone/mobile terminalCD
AB
E         
						

							Pan/Tilt*3
Press the 
 button to display the buttons used to operate pan/tilt on the screen. The pan/tilt can be
adjusted in each direction with the 
, , , and  buttons.
Preset *3
Press the 
 button to display the buttons used to select the preset position on the screen. Camera
images are displayed of the registered preset directions according to the preset numbers selected from
the buttons.
Operating Instructions33
2 Monitor images on a cellular phone/mobile terminal                  
						

							Note•Only preset numbers 1 to 4 can be used for preset operations.
Resolution control
Press the 
 button to display the buttons used to select the resolution on the screen.
The resolution can be changed by selecting a resolution setting from the buttons.
Images are displayed in the image capture size selected in “JPEG(1)” or “JPEG(2)” of [JPEG] on the
[JPEG/H.264] tab.
34Operating Instructions
2 Monitor images on a cellular phone/mobile terminal      
						

							AUX control
Press the 
 button to display the buttons used to operate the AUX output on the screen. The AUX
output terminals can be controlled with the 
 and  buttons.
This function is only displayed when [Terminal 3] is set to [AUX output] on the settings menu.
( ® page 134)
Operating Instructions35
2 Monitor images on a cellular phone/mobile terminal        
						

							36Operating Instructions
2 Monitor images on a cellular phone/mobile terminal    
						

							Zoom display*3
The camera’s zoom can be operated with the 
, , and  buttons.
Note •You can change the image size displayed on the mobile terminal by accessing the following addresses.
– Large display: http://IP address/cam/dl
– Medium display: http://IP address/cam/dm
– Small display: http://IP address/cam/ds
• When the resolution is changed by the resolution control, the displayed resolution changes but the
image size remains the same.
• When the HTTP port number is changed from “80”, enter “http://IP address: (colon) + port number/
cam” *1
 in the address box of the browser. When using the DDNS function, access to  “http://Host name
registered in the DDNS server: (colon) + port number/cam” *2
.
• When “HTTPS” is selected for “HTTPS” - “Connection” on the [Advanced] tab of the “Network” page,
enter as follows.
“https://IP address: (colon) + port number/cam” or “https://Host name registered in the DDNS server:
(colon) + port number/cam”
• When the authentication window is displayed, enter the user name of an administrator or user and
password. Depending on the mobile terminal in use, password entry may be required each time the
screen is switched.
• It is impossible to transmit/receive audio using a mobile terminal.
Operating Instructions37
2 Monitor images on a cellular phone/mobile terminal           
						

							•Depending on the mobile terminal in use, larger size images may not be displayed. In this case,
selecting “9 Low” for “Image quality setting” of “JPEG” ( ®page 95) may sometimes solve this
problem.
• Depending on the mobile terminal in use or its contract plan, it may be impossible to access.
*1
IP address is the global WAN IP address of the router that can be accessed via the Internet. However, when accessing the same
LAN as the camera with a wireless compatible mobile terminal, the IP address is the local IP address.
*2 Only when accessing the camera via the Internet.
*3 Unavailable when the image type is Panorama, Double Panorama, Fisheye or Quad stream. When the image type is Quad PTZ,
operations are only possible for the top left image.
38Operating Instructions
2 Monitor images on a cellular phone/mobile terminal  
						

							3   Record images on the SD memory card
manually
Images displayed on the  “Live” page can be recorded on the SD memory card manually. This button is operable
only when  “Manual” is selected for  “Save trigger ” on the [SD memory card] tab on the  “Basic” page of the setup
menu. ( ®page 71)
It is possible to select  “JPEG(1)”, “JPEG(2)” , “H.264(1)” , or “H.264(2)”  on “Recording format ” of the setup menu
( ® page 71). When “JPEG(1)” or “JPEG(2)” is selected for “Recording format”, still image data are recorded.
When “H.264(1)” or “H.264(2)” is selected, video data are recorded.
Images recorded on the SD memory card can be copied onto the PC. ( ®page 76)
1. Display the “Live” page. ( ®page 7)
2. Click the [SD] button.
→ The SD recording window will open.
3.Click the [ Start] button to start recording images on the SD memory card. The SD recording status indicator
will light red ( ®page 19) while images are being recorded on the SD memory card.
The image saving interval can be configured on the [SD memory card] tab of the “Basic” page.
( ® page 71)
4. Click the [Stop] button to stop saving images on the SD memory card.
®  The SD recording status indicator will turn off.
5. Click the [Close] button to close the window.
Operating Instructions39
3 Record images on the SD memory card manually      
						

							Note•Image data saved on Drive B can be obtained by executing “Access img.” on the [SD memory card]
tab and logging in from the user authentication window ( ®page 76).
The destination to save image data is a fixed directory on Drive B. ( ®page 231)
• When the [Start ] button is clicked immediately after the [ Stop] button is clicked, saving of images may
not start. In this case, click the [Start] button again.40Operating Instructions
3 Record images on the SD memory card manually