Home > Panasonic > Camera > Panasonic Network Camera Wv Np1004 Network Operating Instructions

Panasonic Network Camera Wv Np1004 Network Operating Instructions

Here you can view all the pages of manual Panasonic Network Camera Wv Np1004 Network Operating Instructions . The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.

Page 31

31
[Alarm image FTP transmission]
Select ON or OFF to determine whether or not to
transmit the alarm image to the FTP server.
Default:OFF
[Directory]
Enter the directory name where the alarm images are to
be saved. 
For example, enter /ALARM to designate the directory
ALARM under the FTP root directory.
Number of characters for the directory name:
0 - 256 characters
[File name]
Enter the file name used for the alarm image to be
transmitted to the FTP server. The file name will be as
follows. 
[Entered...

Page 32

32
Configure the settings relating to the alarm out connector [Alarm output\
 setup]
Click the [Alarm] tab on the Alarm setup page. (☞page 30)
The settings relating to the alarm out connector can be configured on th\
is page. Refer to pages 30 and 31 for further
information about the settings relating to the alarm action and the alar\
m image.
[Alarm output setup]
Select ON or OFF to determine whether or not to
output the alarm signals to the alarm out connector
when an alarm is detected.
Default:OFF...

Page 33

33
Set the VMD areas [VMD area]
Click the [VMD area] tab on the Alarm setup page. (☞page 30)
The video motion detection areas can be set on this page. 
When a motion is detected in the set area, the alarm action will be perf\
ormed. 
Note:
It will take around 5 minutes to start detection after the power is turn\
ed on.
Set the VMD areas
Step 1
Set the video motion detection area by dragging the
mouse on the screen. When the [All areas] button is
clicked, the whole area will become the VMD area, and
1...

Page 34

34
Step 6
Select ON or OFF for Light detection control. 
When ON is selected, detection errors caused by turn-
ing lighting on/off can be diminished.
Notes:
•Complete prevention of detection error is not guar-
anteed even if using this function. 
• When ON is selected, performance of the motion
detection may be lower. 
Step 7
Click the [SET] button after completing the settings.
Important:
•The setting will not be applied unless the [SET] but-
ton is clicked.
• The VMD function refers differences...

Page 35

35
Configure the settings relating to the mail notification [Notification]
Click the [Notification] tab on the Alarm setup page. (☞page 30)
The settings relating to the alarm mail can be configured on this page. \
To notify of an alarm occurrence by e-mail, it
is necessary to configure the settings of the mail server. (
☞page 39)
[E-mail notification]
Select ON or OFF to determine whether or not to
notify of an alarm occurrence by e-mail at an alarm
occurrence. 
Default:OFF
[Address]
Enter the...

Page 36

36
Configure the settings relating to Panasonic alarm protocol
[Panasonic alarm protocol setup]
Click the [Notification] tab on the Alarm setup page. (☞page 30)
The settings relating to Panasonic alarm protocol can be configured on t\
his page. 
[Panasonic alarm protocol]
Select ON or OFF to determine whether or not to
notify of an alarm occurrence by Panasonic alarm proto-
col when an alarm is detected. 
Default:OFF
Note:
When ON is selected, the alarm occurrence will be
notified to the registered...

Page 37

37
Configure the settings relating to the authentication
[Authentication setup]
The settings relating to the authentication such as users and PCs (IP a\
ddresses) restrictions for accessing the cam-
era can be configured on the Authentication setup page. 
The Authentication setup page has 2 tabs of the [User] tab and the [Ho\
st] tab.
Configure the settings relating to the user authentication [User]
Click the [User] tab on the Authentication setup page.
The settings relating to the user authentication...

Page 38

38
Configure the settings relating to the host authentication [Host]
Click the [Host] tab on the Authentication setup page. (☞page 37)
The settings to restrict PCs (IP address) to access the camera can be \
configured on this page.
[Host authentication]
Select ON or OFF to determine whether or not to
authenticate the host.
Default:OFF
Important:
Before configuring the host authentication, it is nec-
essary to register IP addresses of the PCs to be
allowed to access the camera and determine their
access...

Page 39

39
Configure the settings of the servers [Server setup]
The settings relating to the mail server and the FTP server can be confi\
gured on this page. 
The Server setup page has 2 tabs of the [Mail] tab and the [FTP] tab.
Configure the settings relating to the mail server [Mail]
Click the [Mail] tab on the Server setup page.
The settings relating to the mail server used to send the alarm mail can\
 be configured on this page. 
[SMTP server address]*
Enter the IP address or the host name of the SMTP
server...

Page 40

40
Configure the settings relating to the FTP server [FTP]
Click the [FTP] tab on the Server setup page. (☞page 39)
The settings relating to the FTP server used to transmit the alarm image\
s can be configured on this page. 
[FTP server address]
Enter the IP address or the host name of the FTP serv-
er. 
Number of characters for the FTP server address:
1 - 128 characters
Important:
When entering the host name for FTP server
address, it is necessary to configure the DNS set-
tings on the [Network] tab of...
Start reading Panasonic Network Camera Wv Np1004 Network Operating Instructions

Related Manuals for Panasonic Network Camera Wv Np1004 Network Operating Instructions

All Panasonic manuals