Panasonic Network Camera Wv Np1004 Network Operating Instructions

11
Transmit Images onto an FTP Server
Images can be transmitted to an FTP server. By configuring the following\
 settings, transmission of images captured
at an alarm occurrence or captured at a designated interval to an FTP se\
rver will become available.
Important:
When using this function, set the user name and password to restrict use\
rs who can log into the FTP server. 
T ransmit an alarm image at an alarm occurrence (Alarm image
FTP transmission)
An alarm image can be transmitted at an alarm...

Save images on the SD memory card when failed to transmit
images by the FTP periodic transmission function
Images failed to transmit by the FTP periodic transmission can be saved \
automatically on the SD memory card. To
obtain the images saved on the SD memory card, use the Windows command p\
rompt or FTP client software. The
obtained images can be browsed on a PC. 
Important:
We make no guarantee for any damages of files on the SD memory card incu\
rred by mulfunction or error occur-
rence in files...

13
Step 3
Move the current directory to drive B and obtain images. 
Notes:
•When logging in the camera, the current directory will be drive D. Images\
 on the SD memory card can be found
in the FTP directory under drive B. Move to the FTP directory and ob\
tain images.

Example:To obtain the image (img_05010101230000.jpg) using the Windows command\
 prompt
1. Enter c:\>ftp 192.168.0.10 and press the [Enter] key.
→FTP connection will be established with 192.168.0.10.
2. Log in by entering the user name...

14
About the Network Security of the Camera
Equipped security functions
The following security functions are featured in this camera.
qAccess restrictions by the host authentication and the user authenticati\
on
It is possible to restrict users from accessing the camera by setting th\
e host authentication and/or the user
authentication to on. (
☞pages 37 and 38)
wAccess restrictions by changing the HTTP port
It is possible to prevent illegal access such as port scanning, etc. by \
changing the HTTP port...

15
Display the Setup Menu and Configure the Settings of the Camera Using a \
PC
The following are descriptions of how to configure the settings on the S\
ETUP menu.
The setup menu is operable by only users whose access level is 1. Admin\
istrator. 
How to display the setup menu
Step 1
Display the Live page. (☞page 5)
Step 2
Click the [Setup] button on the Live page. 
→The window with the user name and password entry
fields will be displayed. 
Step 3
Click the [OK] button after entering the user name and...

16
How to operate the setup menu
Step 1
Click the desired button in the frame on the left of the
window to display the respective setup menu.
When there are tabs at the top of the setup page dis-
played in the frame on the right of the window, click the
desired tab to display and configure the setting items
relating to the name of the tab.
Step 2
Complete each setting item displayed in the frame on
the right of the window. 
Step 3
After completing each setting item, click the [SET] but-
ton to apply...

17
About the operation window
q[Live] button
Click this button to display the Live page.
w[Basic setup] button
Click this button to display the Basic setup page.
The basic settings such as time and date, camera
name, and the settings relating to the NTP server
and the SD memory card can be configured on the
Basic setup page. Refer to page 19 for further
information.
e[Camera setup] button
Click this button to display the Camera setup page.
The settings relating images and audio such as
brightness and...

18
i[Network setup] button
Click this button to display the Network setup page.
The network settings and the settings relating to
DDNS (Dynamic DNS), SNMP (Simple Network
management Protocol) and FTP (File Transfer
Protocol) can be configured on the Network setup
page. Refer to page 41 for further information.
o[Maintenance] button
Click this button to display the Maintenance page.
System log check, firmware upgrade and
initialization of the setup menu can be performed on
the Maintenance page. Refer to...

19
Configure the basic settings of the camera [Basic setup]
The basic settings such as time and date and camera name, and the settin\
gs relating to the NTP server and the SD
memory card can be configured on the Basic setup page. 
The Basic setup page has 3 tabs of the [Basic] tab, the [NTP] tab and \
the [SD memory card] tab. 
Configure the basic settings [Basic]
Click the [Basic] tab on the Basic setup page.
The settings such as the camera name, time and date, etc. can be configu\
red on this page....

20
[Daylight saving (Summertime)]
Select ON or OFF to determine whether or not to
apply daylight saving time.
ON:Applies summer time. An asterisk (*) will be dis-
played on the left side of the displayed time and
date.
OFF:Does not apply summer time.
Default:OFF
[Link/Access LED]
Select ON or OFF to determine whether or not to
light the link LED, the access LED of the network con-
nector, and the SD memory card error LED. 
Select ON to check the network status by lighting the
LEDs. Select OFF to turn off...