Panasonic Network Camera Wv Np1004 Network Operating Instructions

							Network camera
Network Operating Instructions 
Model No.WV-NP1004
PU SH  T O L OC
K/E JE C
T
WV-NP1004
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future\
 use.
(Lens is option.) 
						

							2
Contents
Preface ................................................................\
............................................................ 3
About these operating instructions  ........................................................................\
...... 3
Trademarks and registered trademarks  ...................................................................... 3
Monitoring Images on a PC  ........................................................................\
..................... 4 Monitor images from a single camera  ........................................................................\
. 4
Monitor images from multiple cameras  ....................................................................... 9
Action at an Alarm Occurrence  ........................................................................\
............... 10
Transmit Images onto an FTP Server  ........................................................................\
..... 11 Transmit an alarm image at an alarm occurrence 
(Alarm image FTP transmission)  ........................................................................\
......... 11Transmit images at a designated interval or period (FTP periodic transm\
ission)  ....... 11
Save images on the SD memory card when failed to transmit images by the \
FTP periodic transmission function  ........................................................................\
..... 12
About the Network Security of the Camera  ..................................................................... 14 Equipped security functions  ........................................................................\
................ 14
Display the Setup Menu and Configure the Settings of the Camera Using a \
PC ............ 15 How to display the setup menu  ........................................................................\
........... 15
How to operate the setup menu  ........................................................................\
.......... 16
Configure the basic settings of the camera [Basic setup]  ........................................... 19
Configure the settings relating to images and audio [Camera setup]  ......................... 23
Configures the multi-screen settings [Multi-screen setup]  .......................................... 29
Configure the alarm settings [Alarm setup]  ................................................................. 30
Configure the settings relating to Panasonic alarm protocol 
[Panasonic alarm protocol setup]  ........................................................................\
........ 36 Configure the settings relating to the authentication [Authentication se\
tup]  ............... 37
Configure the settings of the servers [Server setup]  ................................................... 39
Configuring the network settings [Network setup]  ....................................................... 41
Maintenance of the camera [Maintenance]  ................................................................. 49
Configure the Camera Settings such as Image Quality, Brightness, etc. ........................ 52 Configure the settings relating to the camera operations [CAMERA SETUP] \
 ............ 52
Configure the settings relating to the flange-back [BACK-FOCUS]  ............................ 55
Configure the settings on the SPECIAL SETUP page [SPECIAL SETUP]  .............. 57
Configure the network settings [NETWORK]  .............................................................. 58
Configure the detailed settings ........................................................................\
............ 59
About the Displayed System Log  ........................................................................\
............ 66
Troubleshooting ........................................................\
....................................................... 68 
						

							3
Preface
About these operating instructions
There are 2 sets of operating instructions for the WV-NP1004 as follows.\
•Operating Instructions
• Network Operating Instructions
These network operating instructions contain descriptions of how to oper\
ate this product using a PC via a network
and of how to configure the settings. These network operating instructio\
ns also contain descriptions of how to dis-
play the SETUP menu on the video monitor connected to the VIDEO OUT conn\
ector of the camera and of how to
configure the settings on the SETUP menu using the operation buttons on \
the side of the camera.
Refer to the operating instructions for descriptions of how to install t\
his product and of how to connect to a network.
Adobe
®Reader is required to read PDF. When the Adobe®Reader is not installed on the PC, download the latest
Adobe®Reader from the Adobe web site and install it.
T rademarks and registered trademarks
• Adobe, Adobe logos, and Acrobat are registered trademarks of Adobe Syste\
ms Incorporated in the U.S. and/ or
other countries.
• SD logo is a trademark.
• Other names of companies and products contained in these operating instr\
uctions may be trademarks or regis-
tered trademarks of their respective owners. 
						

							4
Step 1
Start up the web browser.
Step 2
Enter the IP address designated using the Panasonic IP
setting software in the address box of the browser.
(Example: http://192.168.0.10)
Important:
•When the HTTP port number is changed from 80,
enter http://IP address of the camera + : (colon) +
port number in the address box of the browser, for
example http://192.168.0.11:8080.
• Configure the web browser to not use the proxy
server. Refer to the network administrator when
using the proxy server.
Step 3
Press the [Enter] key on the keyboard.
→Live images will be displayed.
The following are descriptions of how to monitor images from the camera \
on a PC.
Monitor images from a single camera
Monitoring Images on a PC
Notes:
•
When ON is selected for User Authentication, the
authentication window will be displayed before dis-
playing live images for the user name and password
entries. The default user name and password are as
follows.
User Name: admin
Password: 12345
To enhance the security, change the password for
the user admin. It is recommended to change this
password periodically.
• When Unicast is selected for Transmission type
(
☞page 25), up to 8 users can access the camera
concurrently. When 8 users have been concurrently
accessing already, the access limit message will be
displayed for users who accessed subsequently.
• When ON is selected for MPEG-4 transmission
(
☞page 25), MPEG-4 image will be displayed.
When OFF is select, JPEG image will be dis-
played. It is possible to display JPEG image even
when ON is selected for MPEG-4 transmission.
In this case, the refresh interval will be limited.
The refresh interval may be longer depending on a
network environment, PC spec, photographic sub-
ject, access traffic, etc.
Important:
When displaying multiple MPEG-4 images on a PC,
images may not be displayed depending on the per-
formance of the PC.
Refer to the next page for further information about the
Live page. 
						

							5
About the Live page
q[Live] button
Click this button to display the Live page. Refer to
page 6 for descriptions of how to operate the Live
page.
w[Setup] button *1
Click this button to display the setup menu.
eMulti-screen buttons
Click the desired multiscreen (1-4 or 5-8) button to
display images on a multiscreen.
rImage type buttons
Click the desired button to change the image type to
be displayed. The selected button will turn green.
t
Image capture size buttons
The selected button will turn green and images in
the main area will be displayed in the selected size.
Only the image capture size for which Use is
selected for Image capture size on the [JPEG/
MPEG-4] tab is available. (
☞page 24)
Note:
When Partial scan is selected for Scan mode, the
[1280 x 960] button will turn to [960 x 720].
yZOOM buttons *2
Click the desire button to enlarge the displayed
image.
uBrightness buttons *2
Adjust the brightness of images. 
iAUX buttons *2
Click the desired button to open/close the AUX con-
nector.
oB/W buttons *2
Click the desired button to switch color of the dis-
played images between color and B/W.
!0Camera name
The set camera name will be displayed.
w[Setup] button
q[Live] button
eMulti-screen buttons
rImage type buttons
!0Camera name
yZoom buttons
uBrightness buttons
iAUX buttons
!1Alarm occurrence indication button
!2Audio button
!3One shot button
!4Main area
tImage capture size
buttons
oB/W buttons 
						

							6
Operation
Available operations when live images are displayed
*1 Operable by only users whose access level is 1. Administrator.
*2 Operable by only users whose access level is 1. Administrator or 2. C\
amera control when ON is selected for
User authentication (
☞page 37).
Refer to page 37 for further information about the access level.
Display the setup menu *1
Display images on a multi-
screen
Display MPEG-4 image
Display JPEG image 
The letters Setup on the button will turn green and the setup
menu will be displayed.
To return to the Live page, click the [Live] button.
Images from multiple cameras can be displayed on a multi-
screen by registering cameras on the setup menu. (
☞page 9)
The letters MPEG-4 on the button will turn green and
MPEG-4 image will be displayed.
When OFF is selected for MPEG-4 transmission on the
setup menu, the [MPEG-4] button will not be displayed. 
(
☞page 25)
The letters JPEG on the button will turn green and JPEG
image will be displayed.
Description
! 1Alarm occurrence indication button *2
This button will be displayed and will blink when an
alarm occurred. When this button is clicked, this but-
ton will disappear and the alarm output connector
will be reset. (
☞page 32)
!2Audio button 
Click this button to turn on/off audio.
!3One shot button
Click this button to take a picture (a still picture). The
picture will be displayed on a newly opened window.
!4Main area
Images from the camera will be displayed in this
area.
*1 Operable by only users whose access level is 1. Administrator.
*2 Operable by only users whose access level is 1. Administrator or 2. Camera control when ON is
selected for User authentication (
☞page 37).
Refer to page 37 for further information about the
access level. 
						

							Image capture size of the displayed image will be 1280 x 960
pixels. (Available only when Full scan is selected for Scan
mode)
Image capture size of the displayed image will be 960 x 720
pixels. (Available only when Partial scan is selected for
Scan mode)
Image capture size of the displayed image will be QVGA. 
7
Enlarge the displayed
images *2 Change image capture size
Change brightness *2Returns to the original display size (1x size).
Image will be darker.
Image will be displayed with the standard brightness. 
Image will be brighter.  Displays image with 2x size. 
Displays image with 4x size.
Image capture size of the displayed image will be VGA.
The image capture size of the displayed image can be changed only when d\
isplay-
ing JPEG images.
The buttons respective to the image capture size will be displayed only \
when
Use is selected for the correspondent image capture size in the Image\
 capture
size section of JPEG setup on the [JPEG/MPEG-4] tab. (
☞page 24)
Operation Description
Open/close the AUX con-
nector *2The AUX connector will open.
The AUX connector will close.
Switch color of the dis-
played images between
color and B/W *2Images will be displayed in B/W (black and white). 
Images will be displayed in color. 
Images will be automatically switched between color and B/W
according to brightness (illumination). 
						

							Turn on/off audio* The [Audio] button will be displayed only when ON is selected for M\
ic modeon the setup menu. (
☞page 28)
Display a still picture (one
shot)
When this button is clicked, the button will turn into the 
button and audio will not be heard.
When this button is clicked, a new window will open and the
still picture (one shot) displayed on the Live page will be dis-
played on it. 
To save this picture on a PC, right-click on the image and
select Save image as… on the displayed pop-up menu. When this button is clicked, the button will turn into the 
button and audio will be heard.
Acknowledge alarm occur-
rences *2 This button will be displayed and will blink when an alarm
occurred. When this button is clicked, this button will disap-
pear and the alarm output connector will be reset. 
(
☞page 32)
Click this button when using the camera in the nighttime with
near-infra red rays as light source.
Important:
Switching action between color and B/W (black and white)
cannot be performed unlimitedly due to the durability of
the parts used for this function (approx. 5 000 actions at
maximum). Try not to frequently switch the color of the dis-
played image by clicking the [ON] and [OFF] buttons alter-
nately.
When selecting AUTO1 or AUTO2 for use of the cam-
era under the environment where brightness changes fre-
quently, confirm that the switching action is not frequently
carried out.
When the switching action is frequently carried out, adjust
the parameter of LEVEL and DURATION TIME on the
BW MODE page (page 62). 
8
Operation Description 
						

							9
Monitor images from multiple cameras
Images from multiple cameras can be displayed on a multiscreen. Images f\
rom up to 4 cameras can be displayed
simultaneously. To display images on a multiscreen, it is necessary to r\
egister cameras in advance. 4 cameras can
be registered as a group and up to 2 groups (8 cameras) can be registe\
red. (
☞page 29)
Important:
•Select OFF for both the user authentication and the host authenticatio\
n of the camera to be registered. 
(
☞pages 37 and 38)
• Only JPEG images can be displayed on a multi-screen. Audio will not be h\
eard.
• When the power is turned off or the LAN cable is disconnected while disp\
laying images, displaying images on a
multi-screen from the Live page will become unavailable.
Step 1
Click the [Multiscreen] button.
→Images from the registered cameras will be dis-
played on a 4-split screen. (1) To display images on a single screen, click the the
[1] button or [Live] button. 
(2) Click a camera name. Live images from the camera corresponding to the clicked camera name will be
displayed on the Live page of the newly opened
window.  
						

							10
Action at an Alarm Occurrence
The alarm action will be performed when the following alarm occur.
Alarm type
Terminal alarm: When connecting an alarm device such as a sensor to the alarm connector \
on therear of the camera, the alarm action will be performed when the connecte\
d alarm
device activated.
VMD alarm: When a motion is detected in the set VMD area, the alarm action will be \
performed. * VMD stands for Video Motion Detection.
Command alarm: When received a Panasonic alarm protocol from the connected device via a\
 network (
☞page 36), the alarm action will be performed. 
Scene change detection alarm: When the camera lens is covered by something such as a cloth, or when th\
e shoot- ing direction of the camera is moved, the alarm action will be performed\
.
Action at an alarm occurrence
Display the [Alarm occurrence indication] button on the Live page. (☞page 6)
The [Alarm occurrence indication] button will be displayed on the Live\
 page at an alarm occurrence. 
Note:
The [Alarm occurrence indication] button will be refreshed in 30 seconds\
 intervals. For this reason, it may take a
maximum of 30 seconds until the [Alarm occurrence indication] button is \
displayed on the Live page at an alarm
occurrence. 
Notify of alarm occurrences to the device connected to the alarm connect\
or.
It is possible to output signals from the alarm connector on the rear of\
 the camera and sound the buzzer when an
alarm occurs. The settings for the alarm output can be configured on the\
 [Alarm] tab of the Alarm setup page. 
(
☞page 30)
Transmit an image onto a server automatically
An alarm image can be transmitted at an alarm occurrence to the server d\
esignated in advance. 
The settings required to transmit alarm image to a server can be configu\
red on the [Alarm] tab of the Alarm setup
page (
☞page 31) and the [FTP] tab of the Server setup page (☞page 40). 
Notify of alarm occurrences by e-mail
Alarm mail (alarm occurrence notification) can be sent at an alarm occ\
urrence to the e-mail addresses registered in
advance. Up to 4 addresses can be registered as recipients of the alarm \
mail. The settings for alarm mail can be
configured on the [Notification] tab of the Alarm setup page (
☞page 35) and the [Mail] tab of the Server setup
page (
☞page 39). 
Notify of alarm occurrences to the designated IP addresses (Panasonic a\
larm protocol)
This function is available only when Panasonic device, such as the netwo\
rk disk recorder, is connected to the sys-
tem. When ON is selected for Panasonic alarm protocol, the connected\
 Panasonic device will be notified that the
camera is in the alarm state. The settings for Panasonic alarm protocol \
can be configured on the [Notification] tab of
the Alarm setup page. (
☞page 35)