Panasonic Network Camera Server Bb Hcs301a Operating Instructions

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 71
3.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
4.Click [Go to Audio page].
 The Audio page is displayed.
PC Audio Input 
Timeout  It controls the continuous receiving time of the microphone 
audio from your PC.
 The following settings are available.
1 min, 2 min, 3 min, 5 min, 10 min, 20 min, 30 min, 60 min
Input It controls to enable or disable audio input to this product. 
If Disable is selected, you cannot output the Local audio.
Sensitivity It controls the audio sensitivity to input to this product.
– Minimum: Decreased sensitivity
– Standard: Standard setting (default)
– Maximum: Enhanced sensitivity
*When [Local Audio + Remote Audio] is selected on the Audio page, Local Audio 
and Remote Audio are mixed and outputted from the audio output terminal. If they 
are not balanced well, adjust the audio (see page 
72).
Setting Description 
						

							Operating Instructions
72
Adjusting local audio and remote audio
When [Local Audio + Remote Audio] is selected on the Audio page, audio from the 
audio input terminal (Local Audio) and audio from the microphone connected to 
your PC (Remote Audio) are mixed and outputted from the audio output terminal. 
If they are not balanced well, adjust the audio following the procedures below.
1.Adjust the remote audio (the volume of the microphone connected to your PC).
 In this example, the menus and windows are described as in Windows XP.
(1)Click [Start][Settings][Control Panel] on the Start menu.
(2)Click [Sounds, Speech, and Audio Devices][Sounds and Audio 
Devices].
(3)Click the [Audio] tab, and click [Volume...] in the Sound recording.
(4)Confirm that the Microphone is checked, and adjust the volume bar. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 73
2.Adjust the sensitivity of the local audio.
(1)Click [Audio] on the Setup page.
(2)Select [Minimum], [Standard] or [Maximum] in the Sensitivity (see page 
69).
(3)Click [Save].
3.Adjust both audios.
(1)Click [Audio] on the Setup page.
(2)Select [Minimum], [Standard] or [Maximum] in the Volume (see page 69).
(3)Click [Save]. 
						

							Operating Instructions
74
2.12 Changing Authentication Setting and 
Administrator User Name and Password
The Security: Administrator page allows you to change authentication, 
administrator user name and password. The authentication window is displayed, 
and allows the registered users to access this product.
Notes
 If you access this product for the first time, the window to set administrator user 
name and password is displayed. Make a note of the user name and password 
so that you will not forget them.
 The user name and password should be secured at your own responsibility. 
Pay attention to the following points.
– Set the user name and password as many characters as possible.
– Change the password regularly.
IMPORTANT
 It is important to limit access to this product by use of a unique User Name and 
a secret Password. Because this product is accessed through the Internet it is 
possible that this product could be accessed by unknown individuals, including 
those who are commonly known as crackers to whom you do not want to 
allow access. The use of a unique User Name and a Password known only to 
you will help insure that only authorized individuals are given access to this 
product. You have the option of proceeding without a User Name and 
Password, but it is strongly recommended that you utilize these protections.
1.Click [Administrator] on the Setup page.
2.Set each parameter.
 Clicking [Cancel] cancels your settings without saving changes. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 75
Notes
 When setting authentication, set the user name and password, and save 
them.
 When users other than an administrator are accessing this product, 
[Setup] and [Maintenance] tab will not be displayed.
 The user name and password are case sensitive.
3.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
SettingDescription
General 
AuthenticationAuthentication has 2 phases.
 If you set [Permit access from guest users], this product 
does not display the authentication window in camera 
access. All guest users can view the image without user 
name and password.
Note
If you set [Permit access from guest users], [Login] tab is 
displayed at the top of the page. After you log in as an 
administrator (see page 
77), you can access the Setup 
page and the Maintenance page.
 If you set [Do not permit access from guest users], this 
product displays authentication window in camera access. 
Users must enter the user name and password.
User Name/
Password User Name (6 to 15 characters): Enter the user name.
 Password (6 to 15 characters): Enter the password.
Note
The password must be different from the user name.
 Retype Password: Reenter the password.
 Enter ASCII characters (see page 163). But [Space], [], [], 
[&], [] and [:] are not available. 
						

							Operating Instructions
76
4.Click [Go to Security: Administrator page].
 The Security: Administrator page is displayed.
Note
 When the user name and password have been changed, this product 
displays an authentication window. Enter the user name and password, 
and click [OK].
Administrator/General Users/Guest Users
This product has 3 user levels (administrator, general users and guest users).
Note
Guest users mean unregistered users. Set [Permit access from guest users] 
on the Security: Administrator page (see page 
74).
ItemsAdministratorGeneral UsersGuest Users
User Name and 
PasswordRequiredRequiredNot Required
Number of Users150—
Accessible PagesAll PagesPages Except For 
Setup and 
Maintenance pagePages Except For 
Setup and 
Maintenance page
Access LevelAll OperationsAccess level can 
be set for each 
general user (see 
page 
78).
Access level can 
be set for guest 
users (see page 
78). 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 77
2.13 Logging in to this Product
If you set [Permit access from guest users] on the Security: Administrator page, 
[Login] tab is displayed at the top of the page. After you log in as an administrator, 
you can access the Setup page and the Maintenance page.
1.Click [Login] tab at the top of the page.
2.Check the login mode, and click [Login].
Note
The authentication window is displayed. Enter the user name and password 
set for General Users or Administrator.
3.Enter a valid user name and password according to the Login mode selected 
in step 2, and click [OK]. 
						

							Operating Instructions
78
2.14 Creating, Modifying or Deleting General Users
The General User page allows you to create, modify or delete general users. Up to 
50 general users can be registered. The access level is set for each general user. 
If you set [Permit access from guest users] on the Security: Administrator page, the 
access level can be set for guest users.
Note
For general users, the Setup and Maintenance tabs are not displayed.
1.Click [General User] on the Setup page.
2.If you create a general user, click [Create].
 When setting [Do not permit 
access from guest users] When setting [Permit access 
from guest users]
 If you change the settings of general users or guest users, select 
their name and click [Modify]. The modification page is displayed.
 If you delete a general user, select the name and click [Delete]. The 
confirmation page is displayed. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 79
3.Set each parameter.
 Settings for a general user Settings for guest users
 Clicking [Cancel] takes you back to the previous page without 
saving changes.
SettingDescription
User ID List Up to 50 general users can be registered.
 The list is used to modify or delete general user settings.
User Name/
Password User Name (6 to 15 characters): Enter the user name.
 Password (6 to 15 characters): Enter the password.
Note
The password must be different from the user name.
 Retype Password: Reenter the password.
 Enter ASCII characters (see page 163). But [Space], [], [], 
[&], [] and [:] are not available. 
						

							Operating Instructions
80
4.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
5.Click [Go to General User page].
Access LevelAccess level is set for each general user. Check the feature to 
enable.
 In the limit time of continuous motion JPEG, set the time to 
change the video (Motion JPEG) to still images for each 
user. (Not permitted, Unlimited, 10 seconds—60 minutes) 
In the refresh interval, set the refresh interval after the 
video changes to still images. (3—60 seconds)
 See each page for the following features.
External Output Control (see page 24)
Change Refresh Interval (see page 24)
Change Resolution (see page 24)
Change Quality (see page 24)
Capture Image Button (see page 23)
Listen (see page 25)
Talk (see page 25)
View Multi-Camera page (see page 27)
View Buffered Image page (see page 29)
Setting Description