Panasonic Network Camera Server Bb Hcs301a Operating Instructions

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 151
Alarm 
LogA setup of operationDisableWhen 
selecting 
Alarm or 
Motion 
Detection in 
Trigger.Disable/ 
Enable(When 
there is no new-
arrival alarm 
log:Disable)/
Enable(When 
there is no new-
arrival alarm 
log:Enable)
Active TimeCheckedAM/PM, 1–12 
(h), 0/10/20/30/
40/50 (min)
TimePM 12h 0min-
Notice setup of an 
alarm log[Blank]-
Port No. (SMTP)25-
Port No. (POP)110-
SubjectAlarm Log-
Items Default Required Note 
						

							Operating Instructions
152
Advanced
ItemsDefaultRequiredNote
Image 
DisplaySingle Camera Image 
Resolution320 × 240-320 × 240 or 640 
× 480
Single Camera Image 
QualityStandard-Favo r  Cla r i ty,  
Standard or 
Favo r  Mo ti o n
Single Camera 
Refresh IntervalMotion-3, 5, 10, 30, 60 
(s) or Motion
Multi-Camera Image 
Resolution320 × 240-160 × 120 or 320 
× 240
Multi-Camera Image 
QualityStandard-Favo r  Cla r i ty,  
Standard or 
Favo r  Mo ti o n
Multi-Camera Refresh 
IntervalMotionWhen 
reducing 
traffic3, 5, 10, 30, 60 
(s) or Motion
Time stamp settingDisable-Disable/Enable
LanguageEnglish-English/
Japanese/
French/German/
Italian/Spanish/
Simplified 
Chinese/Russian
Banner Display 
(Administrator)Checked--
(General User)Checked-- 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 153
Multi-
CameraMulti-Camera[Blank]--
DisplayCheckedWhen setting 
Multi-Camera-
IP Address or Host 
Name[Blank]When setting 
Multi-CameraIP address*1  
H o s t  n a m e * 5  i s  1 —
255 characters.
Po r t  N o.[Blank]When setting 
Multi-Camera20, 21, 25 and 110 
are not available.*2
Camera Name[Blank]When setting 
Multi-Camera1—15 characters 
*7
Operation 
TimeOperation TimeAlways--
External 
OutputExternal Device 
Control Output Open-Open/Short to 
GND
Button name 
modificationOpen--
Short--
Indicator 
ControlIndicator ControlTurn indicator 
on when this 
product is on--
*1In IPv4, set 4 digits (0—255) and 3 periods such as 192.168.0.253. But 0.0.0.0 and 
255.255.255.255 are not available.
In IPv6, set 8 hexadecimal digits divided with :. Consecutive 0s can be abbreviated as ::.
*2Set the number of 1—65535.
*3Enter ASCII characters (see page 163). But [Space], [], [], [&], [] and [:] 
are not available.
*4Enter ASCII characters for the host name (see page 163). But [Space], [], [], 
[&], [] are not available.
*5Enter ASCII characters for the host name (see page 163). But [Space], [], [], 
[#], [&], [%], [=], [+], [?], [] are not available.
*6Enter ASCII characters (see page 163) or characters in each language (1—15 
characters for a 1-byte character and 1—7 characters for a 2-byte character). 
But [Space], [], [], [&], [] are not available.
*7Enter ASCII characters (see page 163) or characters in each language (1—15 
characters for a 1-byte character and 1—7 characters for a 2-byte character). 
But [Space], [], [], [#], [&], [%], [=], [+], [?], [] are not available.
Items Default Required Note 
						

							Operating Instructions
154
3.6 Setting an IP Address on Your PC
Your PCs IP address can be assigned by the following procedures.
1.Display the TCP/IP Properties window.
 The steps are different depending on your OS. The steps are shown 
below.
 When using Windows XP and Windows 2000, log in as an administrator 
to access the TCP/IP Properties window.
2.Enter IP address and subnet mask.
3.Click [OK].
 In Windows Me or Windows 98SE, the PC needs to be restarted to enable 
the settings.
Local IP Address
Local IP address is the network ID that is not used on the Internet. They are 
classified into Class A, Class B and Class C, as shown below. Set the IP address 
in the range of the number specified in the class corresponding to your local 
network scale.
OSSteps
Windows XP[Start] ([Settings])[Control Panel][Network and 
Internet Connections][Network Connections][Local Area 
Connection] in use[Properties]Select Internet Protocol 
[TCP/IP][Properties][Use the following IP address]
Windows 2000[Start][Settings][Control Panel][Network and Dial-up 
Connections][Local Area Connection] in use 
[Properties]Select Internet Protocol [TCP/IP] 
[Properties][Use the following IP address]
Windows Me, 
Windows 98SE[Start][Settings][Control Panel][Network]Select 
[TCP/IP] with adaptor in use[Properties][IP Address] 
[Specify an IP address]
ClassSubnet MaskLocal IP Address
Class A255. 0. 0. 010. 0. 0. 1—10. 255. 255. 254
Class B255. 255. 0. 0172. 16. 0. 1—172. 31. 255. 254
Class C255. 255. 255. 0192. 168. 0. 1—192. 168. 0. 254 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 155
3.7 Using Setup Program
The Setup Program can be used for the following purposes.
 Finding the IP address and port number of this product.
 Setting up this product automatically.
 Setting up this product manually to a Static or a DHCP setting.
 Disabling IPsec.
 Displaying the Setup page of this product.
Finding this product
1.Insert the Setup CD-ROM into the CD-ROM drive of your PC.
 If the Panasonic Network Camera Setup window does not appear, click 
setup.exe on the Setup CD-ROM.
2.Click [Camera Setup].
Setup Program can set up this product or Panasonic Network Camera. In the 
explanation in this section, this products setup is described.
Displays version information 
about this program.
 
 
Sets up this product.
Displays the manuals. 
If your PC does not have Adobe® 
Acrobat® Reader®, install it from 
the Adobe Reader website.
Installs Network Camera 
Recorder trial version.
Closes the Setup Program. 
						

							Operating Instructions
156
 When the following dialog box is displayed, click [Unblock].
 You can find the IP address and port number by looking up the MAC 
address of this product.
IPv4 Information
IPv6 Information
Notes
 MAC address is written at the label on the bottom of this product.
 See the Getting Started for the setup from the MAC address.
Status
List window
Displays IPv4 or 
IPv6 information. Por t 
No. MAC 
Address
IP 
Address 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 157
Automatic Setup (Local or Internet Access) or Manual Setup
1.Click [Execute] on the List window shown on page 156.
2.Click each button to execute the program.
Note
See the Getting Started for the local and Internet access setup.
 
 
Sets up this product to view on 
the LAN.
 
Sets up the Internet access to 
this product.
 
Manually sets up this product. 
Disables IPsec. If disabled, the 
button is displayed gray.
 
Displays the Setup page (see 
page 
34). 
						

							Operating Instructions
158
Manual Setup window
Set up each parameter seeing page 39—page 40.
 If more than 20 minutes have passed since this product was turned 
on, this product cannot be set up from the Setup Program. If this 
product cannot be set up, restart this product.
 If Camera setup completed is displayed, click [Close] to finish the 
Manual Setup.
3.Close all Setup windows. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 159
3.8 Setting Your PC
3.8.1 Setting the Proxy Server Settings on Web Browser 
If the proxy server is not used, the settings are not required. If you are using the 
proxy server, the following settings are required.
 To communicate with this product installed inside a LAN, changing the web 
browser settings is recommended.
 A firewall of a proxy server in a corporate environment may prevent access to 
this product. Consult your network administrator.
Notes
 A proxy server is used to protect your network connected to the Internet.
 If this product is accessed via a proxy server, problems may occur. Consult 
your network administrator before installing this product.
 If this product is accessed via a proxy server, the refresh interval may be 
slow.
How to Set the Proxy Server Settings
1.Start up Internet Explorer. (The example is Internet Explorer 6.0.)
2.Click [Tools][Internet Options...]. 
						

							Operating Instructions
160
3.Click the [Connections] tab, and click [LAN Settings].
4.See if the Use a proxy server check box is checked or not. If checked, click 
[Advanced...].
 If not checked, click [Cancel]. Proxy settings are not required.
See if the check
box is checked or not.
If checked, 
click [Advanced...].