Panasonic Network Camera Server Bb Hcs301a Operating Instructions

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 91
2.17 Buffering or Transferring Images by Alarm 
Signal
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
Notes
 If you are recording images to the SD memory card, refresh interval slows 
down.
 You need to attach the alarm to this product when using this feature.
1.Click [Trigger] on the Setup page.
2.Click No. to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Alarm] for trigger, select [Rising: 
GND to Open (High).] or [Falling: Open (High) to GND.] and click [Next>].
Notes
 If you click [Save], all buffered images on the SD memory card are 
deleted.
 Click [Delete Buffered Images] to delete this buffered images.
 Click [Save] to save the settings.
 Clicking [Cancel] takes you back to the Trigger page without saving 
changes. 
						

							Operating Instructions
92
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer (see page 
64).
 Clicking [
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 93
5.Set the image settings, and click [Next>].
 Clicking [].
Note
Due to the network environment, object, number of accesses, enabling IPsec, 
SD memory recording, this product may not record the numbers of images as 
you set. In this case, set the image buffer frequencies longer. For the SD 
memory recording, 1 image per second setting is recommended.
SettingDescription
Image 
Resolution Select image resolution (640 × 480, 320 × 240 (default) or 
160 × 120 pixels) to buffer or transfer.
Image Quality Select the image quality.
[Favor Clarity] optimizes for good quality.
[Standard] offers standard quality. (default)
[Favor Motion] optimizes for enhanced motion.
[Mobile Phone] is for a transfer to a cell phone.
Note
640 × 480 pixels cannot be set for a transfer to a cell 
phone. 
						

							Operating Instructions
94
 Clicking [
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 95
7.Select the transfer method, and click [Next>].
 Clicking [
						

							Operating Instructions
96
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
 Clicking [
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 97
SettingDescription
Server IP 
Address or 
Host Name
*1
*1But [Space], [], [], [&], [] are not available.
 If you set the FTP server IP address, set 4 digits (0—255) and 
3 periods such as 192.168.0.253. But 0.0.0.0 and 
255.255.255.255 are not available. Or set a host name (1—
255 characters).
 You can set IPv6 address.
Po r t N o. Enter a number (1—65535). Usually set to 21.
Login ID*2
*2But [] is not available.
 If your ISP requires a login ID, set it (0—63 characters).
Password*2 If your ISP requires a password, set it (0—63 characters).
Login Timing Select the login timing to an FTP server. If you set [One Time] 
during 1-minute transfer, this product logs in to the server only 
once, and can reduce the time to log in or log out.
Upload File 
Name*1 Set the file name to save on an FTP server. Enter 1—234 
characters. Entering \ creates directories for a file. (E.g. 
NetworkCamera\image.jpg)
Overwrite 
Setting Selecting [Overwrite File] saves and overwrites the image on 
the server. Selecting [Save as New File with Time Stamp] 
saves the image attaching time stamps on the file name, and 
the images are not overwritten.
(E.g. image20050101093020500.jpg) Underlined numbers 
are 9h30min20s500ms on January 1, 2005. The letter s is 
inserted after the day when referring to a summer time zone.
Data 
Tr a n s f e r  
Method Select [Passive Mode] normally. If FTP does not work, select 
[Active Mode] and check the operation. 
						

							Operating Instructions
98
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
 Clicking [
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 99
SettingDescription
SMTP Server IP 
Address or Host 
Name
*1
*1But [Space], [], [], [&], [] are not available.
 If you set the SMTP server IP address, set 4 digits (0—
255) and 3 periods such as 192.168.0.253. But 0.0.0.0 
and 255.255.255.255 are not available. Or set a host 
name (1—255 characters).
 You can set IPv6 address.
Po r t N o. Enter a number (1—65535). Usually set to 25.
POP3 Server IP 
Address or Host 
Name
*1
 If you set the POP3 server IP address, set 4 digits (0—255) 
and 3 periods such as 192.168.0.253. But 0.0.0.0 and 
255.255.255.255 are not available. Or set a host name 
(0—255 characters).
 You can set IPv6 address.
Po r t N o. Enter a number (1—65535). Usually set to 110.
Login ID*2
*2But [] is not available.
 If your ISP requires a login ID to log in to a POP3 server, 
set it (0—63 characters).
Password*2 If your ISP requires a password to log in to a POP3 server, 
set it (0—63 characters).
Reply E-mail 
Address*2 Set the senders E-mail address. We recommend you to 
set the administrators E-mail address.
Destination E-
mail Address*2 
1—3
 Set the destination E-mail address (up to 3).
Subject*2 Enter a subject with ASCII characters (see page 163) or 
characters in each language (0—44 characters for a 1-byte 
character and 0—22 characters for a 2-byte character).
Te x t*2 Enter text with ASCII characters (see page 163) or 
characters in each language (0—63 characters for a 1-byte 
character and 0—31 characters for a 2-byte character). But 
the [end-of-line] key is not available. 
						

							Operating Instructions
100
8.After you confirm the settings and click [Next>], set E-mail notification and click 
[Next>].
 If you select [Enable], the E-mail Notification When Triggered page is 
displayed. Enter the settings seeing page 
98 and page 99.
9.Click [Save] after confirming the settings.
 New settings are saved.
 When finished, Success! is displayed.
Note
If you click [Save], all buffered images on the SD memory card are 
deleted.
SettingDescription
Disable This product does not send an E-mail notification when 
buffering or transferring image.
Enable This product sends an E-mail notification (up to 3 
destinations) when buffering or transferring image.