Panasonic Network Camera Management System Bbhgw700a Operating Instructions

51 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
Notes
 The default is set as the device-specific SSID and the 13 character 128 bit encryption key. The  
default SSID and the 13 character 128 bit encryption key are displayed on the rear of this product.
 There are 6 types of WEP format: 10 Hexadecimal characters 64 bit, 26 hexadecimal characters 
128 bit, 32 hexadecimal characters 152 bit, 5 alpha-numeral characters 64 bit, 13 alpha-numeral 
characters 128 bit, and 16...

Operating Instructions
52
Note
The KX-HCM250 and KX-HCM270 wireless LAN headings correspond to the following 
headings.
Data Entry Field
Note
When modifying the encryption setup of this product after a wireless camera etc. has been registered 
automatically, it is necessary to match the wireless cameras settings.
40 bit password entry5 alpha-numerical characters 64 bit
128 bit password entry13 alpha-numerical characters 128 bit
40 bit key entry10 hexadecimal characters 64 bit
128 bit key entry 26...

53 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
Data Entry Field
Notes
 When modifying the encryption setup of this product after a wireless camera etc. has been 
registered automatically, it is necessary to match the wireless cameras settings.
 When this product is using WPA-PSK(TKIP), if connected wireless devices have the same network 
key, they may be able to connect to this product using either the TKIP or AES encryption.
6.After checking the setting information,...

Operating Instructions
54
MAC Address Filtering
PCs that are not registered with this product cannot connect to this product. On the LAN card of each 
PC, a MAC address is registered, which is specific to that LAN card. If that MAC address is registered 
in MAC Address Filtering, only the PC with that MAC address can connect. To check the MAC address 
of your PC see Checking your PCs IP Address and MAC Address. (see page 
123)
Note
See the Panasonic Support Website...

55 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
3.1.8 Using Viewnetcam.com
Viewnetcam.com allows you to view images form the WAN (Internet) side. Obtain the URL from the 
Viewnetcam.com service, and view camera images by accessing the camera portal. Take the steps 
below, to view camera images from the WAN side.
Notes
 Viewnetcam.com is a free service.
 When connecting to the Internet using a Static connection, access the camera portal using the IP 
address registered...

Operating Instructions
56
Note
The Personal URL can be used after registering with the Viewnetcam.com service. 
8.Click Your Account Link.
9.By following the Viewnetcam.com registration 
instructions, you can register this product with 
Viewnetcam.com
.
10.Enter the URL displayed in Personal URL into 
the web browser of a PC that is connected to 
the Internet
.
(e.g. http://camXXXX.viewnetcam.com)
 The camera portal is displayed. 

57 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
3.2 Using Advanced Setup
3.2.1 Accessing this Product from the Internet
The address translation page allows you to perform detailed settings in order to translate the WAN 
(Internet) sides global address and the private address, and access this products network from the 
Internet. Set these when enabling the IP masquerade function and the port forwarding function used, 
for example, when starting up a mail server. When using...

Operating Instructions
58
Address Translation
Port Forwarding
When data is sent from a PC on the WAN (Internet) side to the LAN (Home) server using an 
application, a packet is sent out to this product. The packet contains a port number used by the 
application, and is forwarded to a specified PC. In order to use this port forwarding function, verify 
which port number the application uses, enter it into the forwarding port no. entry field, and the enter 
the applicable PCs IP address into the forwarding...

59 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
Data Entry Field
Note
When setting up the table, there is a possibility of illegal access to the forwarding port from the Internet. 
For safety, only set it when required.
OperationAllows you to Modify/Delete the parameters of each heading.
EntrySelect Enable or Disable. When Enable is selected, the entry functions as if 
set on a table (protocol, forwarding port, forwarding IP address). When 
Disable is selected, even if...

Operating Instructions
60
How to Add Entries
1.Click Port Forwarding on the Address 
Translation page.
2.Click Add under the Operation heading.
 The port forwarding registration page is 
displayed.
3.Under each heading set Entry, No., Protocol, 
Forwarding Port
 No., Forwarding IP Address.
 If Enable is checked in Entry, the specified  
entry is enabled. If Disable is checked, the 
entry will not function but the settings will 
not be deleted to make it easier to set up 
next time.
 Regarding the...