Home
>
Panasonic
>
Camera Accessories
>
Panasonic Network Camera Management System Bbhgw700a Operating Instructions
Panasonic Network Camera Management System Bbhgw700a Operating Instructions
Here you can view all the pages of manual Panasonic Network Camera Management System Bbhgw700a Operating Instructions. The Panasonic manuals for Camera Accessories are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
31 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
7.Select the ISP entered in step 4.
8.When setup is complete, click [Save].
The entered information is saved.
Note
When saving do not cut the power supply. If cut, saving might not be completed successfully.
9.When [Restart] is displayed on the setup page,
click it.
10.Restart the PC.
Check that the PC is connected to the
Internet. (see page 36)
Notes
When registering or editing, restart all PCs connected to the LAN...](http://img.usermanuals.tech/thumb/58/69507/w300_bbhgw700a_en_om_d-30.png "Page 31
31 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
7.Select the ISP entered in step 4.
8.When setup is complete, click [Save].
The entered information is saved.
Note
When saving do not cut the power supply. If cut, saving might not be completed successfully.
9.When [Restart] is displayed on the setup page,
click it.
10.Restart the PC.
Check that the PC is connected to the
Internet. (see page 36)
Notes
When registering or editing, restart all PCs connected to the LAN...")
31 [For assistance, please call: 1-800-272-7033]Operating Instructions Functions 7.Select the ISP entered in step 4. 8.When setup is complete, click [Save]. The entered information is saved. Note When saving do not cut the power supply. If cut, saving might not be completed successfully. 9.When [Restart] is displayed on the setup page, click it. 10.Restart the PC. Check that the PC is connected to the Internet. (see page 36) Notes When registering or editing, restart all PCs connected to the LAN...
Page 32
![Page 32
Operating Instructions
32
6to4 Connection
6to4 is a type of tunnel connection which can be used experimentally. 6to4 encapsulates IPv6 packets
with IPv4 packets, and connects to the IPv6 network through the 6to4 relay router. It is not necessary
to subscribe to an ISP for this type of connection. Take the following steps to set up 6to4 connection.
1.Select [IPv6 ISP Registration].
2.Click [Register/Edit] on the IPv6 ISP
registration list.
3.Select 6to4.
4.Enter ISP Name.
Enter no more than 20...](http://img.usermanuals.tech/thumb/58/69507/w300_bbhgw700a_en_om_d-31.png "Page 32
Operating Instructions
32
6to4 Connection
6to4 is a type of tunnel connection which can be used experimentally. 6to4 encapsulates IPv6 packets
with IPv4 packets, and connects to the IPv6 network through the 6to4 relay router. It is not necessary
to subscribe to an ISP for this type of connection. Take the following steps to set up 6to4 connection.
1.Select [IPv6 ISP Registration].
2.Click [Register/Edit] on the IPv6 ISP
registration list.
3.Select 6to4.
4.Enter ISP Name.
Enter no more than 20...")
Operating Instructions 32 6to4 Connection 6to4 is a type of tunnel connection which can be used experimentally. 6to4 encapsulates IPv6 packets with IPv4 packets, and connects to the IPv6 network through the 6to4 relay router. It is not necessary to subscribe to an ISP for this type of connection. Take the following steps to set up 6to4 connection. 1.Select [IPv6 ISP Registration]. 2.Click [Register/Edit] on the IPv6 ISP registration list. 3.Select 6to4. 4.Enter ISP Name. Enter no more than 20...
Page 33
![Page 33
33 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
9.When [Restart] is displayed on the setup page,
click it.
10.Restart the PC.
Check that the PC is connected to the
Internet. (see page 36)
Notes
When registering or editing, restart all PCs connected to the LAN (home) side.
When adding more PCs after setup has been completed, connect the new PCs to jacks
LAN1 to LAN4 and then restart.](http://img.usermanuals.tech/thumb/58/69507/w300_bbhgw700a_en_om_d-32.png "Page 33
33 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
9.When [Restart] is displayed on the setup page,
click it.
10.Restart the PC.
Check that the PC is connected to the
Internet. (see page 36)
Notes
When registering or editing, restart all PCs connected to the LAN (home) side.
When adding more PCs after setup has been completed, connect the new PCs to jacks
LAN1 to LAN4 and then restart.")
33 [For assistance, please call: 1-800-272-7033]Operating Instructions Functions 9.When [Restart] is displayed on the setup page, click it. 10.Restart the PC. Check that the PC is connected to the Internet. (see page 36) Notes When registering or editing, restart all PCs connected to the LAN (home) side. When adding more PCs after setup has been completed, connect the new PCs to jacks LAN1 to LAN4 and then restart.
Page 34
![Page 34
Operating Instructions
34
Static v6 Connection
This function allows you to communicate directly using IPv6. To set up static v6 connection, take the
following steps.
1.Select [IPv6 ISP Registration].
2.Click [Register/Edit] on the IPv6 ISP
registration list.
3.Select Static v6.
4.Enter ISP Name.
Enter no more than 20 characters. In the
example right, abcde has been entered.
5.Enter the IPv6 Address(WAN), Prefix(LAN),
IPv6 Default Gateway, IPv6 DNS Server 1, and
IPv6 DNS Server2, and if specified...](http://img.usermanuals.tech/thumb/58/69507/w300_bbhgw700a_en_om_d-33.png "Page 34
Operating Instructions
34
Static v6 Connection
This function allows you to communicate directly using IPv6. To set up static v6 connection, take the
following steps.
1.Select [IPv6 ISP Registration].
2.Click [Register/Edit] on the IPv6 ISP
registration list.
3.Select Static v6.
4.Enter ISP Name.
Enter no more than 20 characters. In the
example right, abcde has been entered.
5.Enter the IPv6 Address(WAN), Prefix(LAN),
IPv6 Default Gateway, IPv6 DNS Server 1, and
IPv6 DNS Server2, and if specified...")
Operating Instructions 34 Static v6 Connection This function allows you to communicate directly using IPv6. To set up static v6 connection, take the following steps. 1.Select [IPv6 ISP Registration]. 2.Click [Register/Edit] on the IPv6 ISP registration list. 3.Select Static v6. 4.Enter ISP Name. Enter no more than 20 characters. In the example right, abcde has been entered. 5.Enter the IPv6 Address(WAN), Prefix(LAN), IPv6 Default Gateway, IPv6 DNS Server 1, and IPv6 DNS Server2, and if specified...
Page 35
![Page 35
35 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
8.When setup is complete, click [Save].
The entered information is saved.
Note
When saving, do not cut the power supply. If cut, saving might not be completed successfully.
9.When [Restart] is displayed on the setup page,
click it.
10.Restart the PC.
Check that the PC is connected to the
Internet. (see page 36)
Notes
When registering or editing, restart all PCs connected to the LAN (home) side.
When adding more PCs...](http://img.usermanuals.tech/thumb/58/69507/w300_bbhgw700a_en_om_d-34.png "Page 35
35 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
8.When setup is complete, click [Save].
The entered information is saved.
Note
When saving, do not cut the power supply. If cut, saving might not be completed successfully.
9.When [Restart] is displayed on the setup page,
click it.
10.Restart the PC.
Check that the PC is connected to the
Internet. (see page 36)
Notes
When registering or editing, restart all PCs connected to the LAN (home) side.
When adding more PCs...")
35 [For assistance, please call: 1-800-272-7033]Operating Instructions Functions 8.When setup is complete, click [Save]. The entered information is saved. Note When saving, do not cut the power supply. If cut, saving might not be completed successfully. 9.When [Restart] is displayed on the setup page, click it. 10.Restart the PC. Check that the PC is connected to the Internet. (see page 36) Notes When registering or editing, restart all PCs connected to the LAN (home) side. When adding more PCs...
Page 36
![Page 36
Operating Instructions
36
3.1.3 Confirming Connection to the Internet
Confirming Connection
After the setup for Internet connection is complete, try to access a website. If the website is displayed,
you have successfully connected to the Internet.
1.Start the web browser.
2.Enter a website address into the web browsers
address bar
(e.g. http://www.panasonic.com), and press
[Enter]
.
The website is displayed.
When a website is not displayed...
Check that the website address was entered correctly...](http://img.usermanuals.tech/thumb/58/69507/w300_bbhgw700a_en_om_d-35.png "Page 36
Operating Instructions
36
3.1.3 Confirming Connection to the Internet
Confirming Connection
After the setup for Internet connection is complete, try to access a website. If the website is displayed,
you have successfully connected to the Internet.
1.Start the web browser.
2.Enter a website address into the web browsers
address bar
(e.g. http://www.panasonic.com), and press
[Enter]
.
The website is displayed.
When a website is not displayed...
Check that the website address was entered correctly...")
Operating Instructions 36 3.1.3 Confirming Connection to the Internet Confirming Connection After the setup for Internet connection is complete, try to access a website. If the website is displayed, you have successfully connected to the Internet. 1.Start the web browser. 2.Enter a website address into the web browsers address bar (e.g. http://www.panasonic.com), and press [Enter] . The website is displayed. When a website is not displayed... Check that the website address was entered correctly...
Page 37
![Page 37
37 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
3.1.4 Managing the Connection Mode
The connection mode page allows you to switch between registered ISPs. On the connection mode
page, connecting ISPs which have been registered, can be selected from the LAN (Home) side to the
WAN (Internet) side.
The two types of connection mode for ISPs connecting to the WAN (Internet) side are [DHCP/Static]
and [PPPoE].
Setting up the DHCP/Static Connection Mode to the WAN (Internet)...](http://img.usermanuals.tech/thumb/58/69507/w300_bbhgw700a_en_om_d-36.png "Page 37
37 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
3.1.4 Managing the Connection Mode
The connection mode page allows you to switch between registered ISPs. On the connection mode
page, connecting ISPs which have been registered, can be selected from the LAN (Home) side to the
WAN (Internet) side.
The two types of connection mode for ISPs connecting to the WAN (Internet) side are [DHCP/Static]
and [PPPoE].
Setting up the DHCP/Static Connection Mode to the WAN (Internet)...")
37 [For assistance, please call: 1-800-272-7033]Operating Instructions Functions 3.1.4 Managing the Connection Mode The connection mode page allows you to switch between registered ISPs. On the connection mode page, connecting ISPs which have been registered, can be selected from the LAN (Home) side to the WAN (Internet) side. The two types of connection mode for ISPs connecting to the WAN (Internet) side are [DHCP/Static] and [PPPoE]. Setting up the DHCP/Static Connection Mode to the WAN (Internet)...
Page 38
![Page 38
Operating Instructions
38
Setting up the PPPoE Connection Mode to the WAN (Internet) Side
Data Entry Field
1.Click Connection Mode on the menu page.
The connection mode page is displayed.
2.Select PPPoE as the connection mode.
ISP Selection is modified.
3.Select the ISP on the ISP selection dropdown
list
.
4.Click [Save].
When setup is complete, the restart
window is displayed.
5.Click [Restart].
ISP SelectionSelect only one ISP to use. It is possible to select an IPv6 ISP if one is
registered.](http://img.usermanuals.tech/thumb/58/69507/w300_bbhgw700a_en_om_d-37.png "Page 38
Operating Instructions
38
Setting up the PPPoE Connection Mode to the WAN (Internet) Side
Data Entry Field
1.Click Connection Mode on the menu page.
The connection mode page is displayed.
2.Select PPPoE as the connection mode.
ISP Selection is modified.
3.Select the ISP on the ISP selection dropdown
list
.
4.Click [Save].
When setup is complete, the restart
window is displayed.
5.Click [Restart].
ISP SelectionSelect only one ISP to use. It is possible to select an IPv6 ISP if one is
registered.")
Operating Instructions 38 Setting up the PPPoE Connection Mode to the WAN (Internet) Side Data Entry Field 1.Click Connection Mode on the menu page. The connection mode page is displayed. 2.Select PPPoE as the connection mode. ISP Selection is modified. 3.Select the ISP on the ISP selection dropdown list . 4.Click [Save]. When setup is complete, the restart window is displayed. 5.Click [Restart]. ISP SelectionSelect only one ISP to use. It is possible to select an IPv6 ISP if one is registered.
Page 39
![Page 39
39 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
3.1.5 Using Camera
The camera page allows you to set up cameras connected to this product.
Usually it is not necessary to set up a camera because the automatic registration function of
Panasonics Network Cameras sets up the camera name, port number, and IP address automatically.
When changing a camera name, follow the steps on page
42 - changing the setup of automatically
registered cameras. Also, when manually setting...](http://img.usermanuals.tech/thumb/58/69507/w300_bbhgw700a_en_om_d-38.png "Page 39
39 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
3.1.5 Using Camera
The camera page allows you to set up cameras connected to this product.
Usually it is not necessary to set up a camera because the automatic registration function of
Panasonics Network Cameras sets up the camera name, port number, and IP address automatically.
When changing a camera name, follow the steps on page
42 - changing the setup of automatically
registered cameras. Also, when manually setting...")
39 [For assistance, please call: 1-800-272-7033]Operating Instructions Functions 3.1.5 Using Camera The camera page allows you to set up cameras connected to this product. Usually it is not necessary to set up a camera because the automatic registration function of Panasonics Network Cameras sets up the camera name, port number, and IP address automatically. When changing a camera name, follow the steps on page 42 - changing the setup of automatically registered cameras. Also, when manually setting...
Page 40
Operating Instructions 40 IPv6 Camera Por tSpecify the port number for the IPv6 camera. The specified port will be provided automatically to IPv6 cameras. The default is 80.