Panasonic Network Camera Management System Bbhgw700a Operating Instructions

41 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
3.1.6 Registering a Camera Automatically
After connecting this product to a Panasonic Network Camera (Customer-provided), turning the 
camera on, and returning the settings to factory default, the cameras network setup (IP address and 
subnet mask etc.) and wireless security setup are performed automatically. After the camera is turned 
on, this product and the camera exchange information and automatically set up the...

Operating Instructions
42
Changing the Setup of Automatically Registered Cameras
Notes
 With cameras that have the option of enabling images to be accessed from the Internet, 
follow the setup guidelines specified in the cameras Operating Instructions.
 The port number and IP address of automatically registered cameras cannot be modified.
 If you click Confirm, the camera image will appear.
 It may not be possible to open an automatically registered IPv6 camera from the WAN side 
using the Camera...

43 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
Additional Camera Registration (Registering Additional Cameras 
Manually)
Follow the steps below to register additional cameras.
1.Click Add under the Operation heading.
2.Enter or Select Camera Name, Camera 
network location, Access Control, Port, IP 
Address, Host Name, 
IPv6 Address, Host 
Name, and Pre-shared Key if you are using 
IPsec,
 and click [Add].
3.When setup is complete, click [Save].
 The entered information...

Operating Instructions
44
Notes
 When registering an additional camera, modify the settings on the camera side too. For 
details, see the cameras Operating Instructions.
 When registering an additional camera, it is necessary to set port forwarding and/or packet 
filtering. Set them manually, referring to pages 
58, 66, and 71. Also, when using this product 
under a UPnP™ router, even if the settings for top level routing and address translation are 
set to Disable, it is necessary to set routing for...

45 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
IPsec
Connection between 
This Product and a 
WAN camera
Select Enable IPsec or Disable IPsec.
Pre-shared KeyWhen Enable IPsec is selected, enter the Pre-shared key.
Retype Pre-shared KeyRetype the same Pre-shared key as above. 

Operating Instructions
46
Screen Assignment
This function allows you to set the format of the camera portal page and set the screen assignment.
Data Entry Field
1.Click [Screen Assignment].
2.Select from Camera Name and Still Image 
(
refreshing), Camera Name and Still Image, 
and Camera Name Only in 
Screen For mat.
3.Select a camera name from the Camera List 
dropdown list, and click on the camera frame 
where you want to display it on the Screen 
Assignment.
 The selected camera frame is displayed in...

47 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
3.1.7 Using Wireless
The wireless setup page allows you to perform settings to connect to wireless LAN and also perform 
security settings. The wireless LAN uses radio waves in the same way as a TV or transceiver does, 
selects a data channel, and sends/receives data.
The three data sending modes, 802.11b, 802.11b/g, and 802.11g only, each have differing bands 
and speeds. The default is all 802.11b/g. Also, it is possible...

Operating Instructions
48
Notes
 Setting the stealth SSID function to Disable weakens the security.
 Some data channels may be limited by the wireless LAN card used on the wireless terminal 
side. Check the range of data channels available on the wireless LAN card, and set the data 
channels on this product accordingly.
 When modifying the SSID of this product after a wireless camera etc. has been registered 
automatically, it is necessary to match the wireless cameras settings.
1.Click [Wireless] on...

49 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
Data Entry Field
Wireless 
Network ModeSelect a wireless network mode from Disable, 802.11b, 802.11b/g or 
802.11g only.
 Select Disable when you do not want to send/receive wireless data.
 802.11b sends/receives data on a 2.4 GHz band. Compatible products 
are abundant and low priced. Not only is it easy to use, but it is also 
already widespread so it is useful when you want to use your other 
wireless devices.
...

Operating Instructions
50
Notes
 It is necessary to set the same SSID for the wireless device side and this product.
 If necessary, set Encryption and MAC Address Filtering. To encrypt the sending/receiving data, 
click Encryption on the Wireless Setup page. (see below) To stop unregistered wireless devices 
from connecting to this product, click MAC Address Filtering. (see page 
54)
Encryption
This function allows you to encrypt sending/receiving data within the wireless LAN. By encrypting the 
data,...