Panasonic Network Camera Management System Bbhgw700a Operating Instructions

21 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
3Functions
3.1 Using the Functions
3.1.1 Registering ISPs
Consult with your contracted ISP about which connection type to use, or about your service or contract.
Data Entry Field
*If it is not necessary to enter information into the data entry field, leave it blank.
The ISP registration page allows you to register new 
ISPs (see page 
22) for this product, edit them, and 
delete them (see page 28). Internet connection...

Operating Instructions
22
PPPoE Connection
Follow the steps below to set up PPPoE connection.
1.Select [ISP Registration].
2.Click [Register/Edit] on the ISP registration list.
3.Select PPPoE.
Private address 
192.168.0.2
Private address 
192.168.0.1
InternetISP
Modem
The ISP assigns an IP address 
by PPPoE connection. 

23 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
Notes
 When registering or editing, restart all PCs connected to the LAN (home) side.
 When adding more PCs after setup has been completed, connect the new PCs to jacks 
LAN1 to LAN4 and then restart.
 When instructed by your ISP, change the MTU value. When not instructed, leave it as the  
default (1492). (see page 
77)
4.Enter ISP Name.
 Enter no more than 20 characters. In the 
example right, abcde has been entered....

Operating Instructions
24
DHCP Connection (Internet Connection using a DHCP Server)
Follow the steps below to set up DHCP connection, where an IP address is automatically allocated by 
the ISP.
1.Select [ISP Registration].
2.Click [Register/Edit] on the ISP registration list.
3.Select DHCP.
4.Enter ISP Name.
 Enter no more than 20 characters. In the 
example right, abcde has been entered.
5.If specified by the ISP, enter Device Name*, 
Gateway, DNS Server 1,
 2, and/or Domain 
Name
.
 See the ISPs...

25 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
Notes
 When registering or editing, restart all PCs connected to the LAN (home) side.
 When adding more PCs after setup has been completed, connect the new PCs to jacks 
LAN1 to LAN4 and then restart.
6.When setup is complete, click [Save and Go to 
Connection 
Mode].
 The connection mode page is displayed.
7.Select the ISP entered in step 4.
8.When setup is complete, click [Save].
 The entered information is saved....

Operating Instructions
26
Static Connection (Internet Connection using a Static IP Address)
It may be necessary, if you are instructed by the ISP, to enter the value of the IP address or gateway 
address into setup information.
1.Select [ISP Registration].
2.Click [Register/Edit] on the ISP registration list.
3.Select Static.
Private address 
192.168.0.2
Private address 
192.168.0.1
InternetISP
Modem
An IP address is set based 
on information from the ISP.Static IP Address 

27 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
Notes
 When registering or editing, restart all PCs connected to the LAN (home) side.
 When adding more PCs after setup has been completed, connect the new PCs to jacks 
LAN1 to LAN4 and then restart.
4.Enter ISP Name.
 Enter no more than 20 characters. In the 
example right, abcde has been entered.
5.Enter the IP Address, Subnet Mask, Gateway 
and DNS server 1, 2, and if specified by the 
ISP, enter the Domain Name.
...

Operating Instructions
28
ISP Deletion
Follow the steps below to delete ISPs from the ISP registration list/IPv6 ISP Registration List.
1.Click [Delete] on the row of the ISP you want to 
delete
.
 The ISP deletion confirmation window is 
displayed.
2.Click [Yes].
 To cancel the deletion click [No].
3.When [Restart] is displayed on the setup page, 
click it. 

29 [For assistance, please call: 1-800-272-7033]Operating Instructions
Functions
3.1.2 Registering IPv6 ISPs
Data Entry Field
*If it is not necessary to enter information into the data entry field, leave it blank.
What is IPv6?
 IPv6 is short for Internet Protocol Version 6.
 IPv6 was created to address the additional IP addresses that will be needed as the Internet 
continues to expand.
 IPv6 is expected to gradually replace IPv4, with the 2 coexisting for a number of years during a 
transition...

Operating Instructions
30
Tunneling Connection
It is possible to encapsulate IPv6 packets with IPv4 packets and perform IPv6 communication on a 
IPv4 network. Take the following steps to set up tunneling connection.
1.Select [IPv6 ISP Registration].
2.Click [Register/Edit] on the IPv6 ISP 
registration list.
3.Select Tunneling.
4.Enter ISP Name.
 Enter no more than 20 characters. In the 
example right, abcde has been entered.
5.Enter the Destination IP Address and 
Prefix(LAN)
, and if specified by the...