Panasonic Network Camera Kx Hcm10 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                  41
Click to Center
When you click the certain point on the Single Camera screen, the point is 
centered on the image.
1.Put the cursor on the point which should be centered and click it.
2.The clicked point is centered.
Note
Click to Center does not move over the end of corner when the Pan/Tilt 
range reaches the end. The Pan/Tilt operation can be locked by Pan/Tilt 
control on page 78.
Cursor 

Operating Instructions
42
3.3.1 Using Operation Bar
Operation bar controls the general use of Network Camera. The following sections 
describe the general way of using it.
(1) End Display: When Pan/Tilt operation has reached the 
end of corner, Left End, Right End, Up End or Down 
End appears.
Locked Display: Pan/Tilt/Preset, Brightness Control and 
Preset program can be locked. Locked appears when the 
operation bar is clicked.
Preset Display: Preset name appears when clicking 
Preset Button.
(2)...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                  43
3.3.2 Using Pan/Tilt Operation
Pan/Tilt scan buttons automatically move the lens horizontally from -60° to +60° 
and vertically from 0° to -45°, and the lens returns to the current position. Use Click 
to Center feature to stop scanning. Each surrounding arrow of Pan/Tilt moves the 
lens Up, Down, Right, Left, and the home position button moves it to Home 
Position.
Note
Pan/Tilt operation can be...

Operating Instructions
44
3.3.3 Setting Preset Positioning and Home Positioning
Preset positioning and Home Positioning allow you to fix the lens on a specific 
point. This feature can memorize Brightness and White Balance settings. The 
preset buttons (1—4) are registered in the factory default. 
(1: Upper Left, 2: Upper Right, 3: Lower Left, 4: Lower Right) 
All eight preset buttons and home position button can be overridden. Lens moves 
to the preset/home position when clicking each registered button....

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                  45
Deleting the preset buttons
1) Click [Program]. Red cancel button appears.
•[Cancel] links to the Single Camera 
screen without deleting.
2) Select the preset number to delete.
3) Click [Delete].
•[Cancel] links to the Single Camera 
screen without deleting.
4) Deleted preset button turns white.
•Go back to step 2 to delete other preset 
buttons.
5) Click [Cancel] when finished.
2)
3)
1)
4)
5) 

Operating Instructions
46
3.3.4 Viewing Buffered Image Screen
Buffered Image screen can be viewed by clicking [Viewer] on the operation bar. 
Buffered Image is saved in the internal memory of Network Camera by clicking 
[Start Capture]. Alarm/Timer mode in the Image Transfer on page 66 can also 
buffer the image. Buffered Image is erased by power off, restarting, Update 
Firmware, resetting to Factory Default and when Image Transfer or Name/Time 
window is saved and clicking [Start Capture].
Operation...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                  47
Notes
•The refresh interval becomes longer as more clients access Network 
Camera.
•The image resolution, image quality and object situation affect the 
number of frames in the Buffered Image.
•If internal memory is filled after clicking [Start Capture], the image 
buffering will stop automatically.
To save still images on your PC
The PC can save still images taken by JPEG - Regularly Refresh and...

Operating Instructions
48
3.4 Multi-Camera Screen
Four separate Network Camera images can be displayed in both Motion JPEG 
and JPEG - Regularly Refresh. The Pan/Tilt operation cannot be operated on the 
Multi-Camera screen. You can jump to each individual Network Camera by 
clicking Camera Name. The Single Camera screen has the Pan/Tilt operation, 
which can reflect on the Multi-Camera screen.
Refer to page 81 for how to configure each Network Camera.
Notes
•On the Multi-Camera screen, the maximum image...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                  49
3.5 Setup Page
Setup Page controls all features of Network Camera. Authentication window 
protects the Network Camera security. It enables only administrator to access 
Setup Page by entering ID and Password.
Enter http://IP Address (or URL) 
:Port No./config.html on the web browser 
and press [Enter]. When port number is 80 (default), you do not need to enter port 
number. Then Setup Page appears....

Operating Instructions
50
Setup Page
Note
Firmware Version number indicated on Setup Page is important for your future 
support of Network Camera.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
Version
number