Panasonic Network Camera Kx Hcm10 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                  11
1.1.3 Authentication—System Security Feature
Authentication window requires you to enter the administrator/general user ID 
and password for security. Password security can prevent unregistered users/
intruders from accessing your image from their web browsers. Authentication 
windows are not displayed in the default. Refer to page 60 for setting up 
Authentication window, the administrator ID and the...

Operating Instructions
12
1.2 Included Accessories
The following items are provided with Network Camera. Additional pieces can be 
ordered by calling 1-800-332-5368.
Notes
If any items are missing, contact the dealer immediately.
The order numbers listed above are subject to change without notice.
Save the original carton and packing materials for future shipping and 
transportation of the unit.
AC Adaptor — 1 pc.
Order No. PQLV10YCamera Stand — 1 pc.
Order No. PSKLHCM10M
Setup CD-ROM — 1 pc.
Order...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                  13
Setup CD-ROM
The setup program simplifies Network Camera installation. Adobe
® Acrobat® 
Reader 4.05 or later enables you to see the Operating Instructions on the Setup 
CD-ROM. If Adobe Acrobat Reader is not installed on the PC, double-click 
ar405eng.exe. Refer to ReadmeEng.txt for the directory and file structure of 
the Setup CD-ROM.
Notes
Do not scratch, smudge, write or label either surfaces of...

Operating Instructions
14
1.3 Camera Feature Locations
1.3.1 Front View
Power Indicator
Power Indicator can be controlled on Indicator Control window on page 84. 
Power Indicator blinks in the following situations.
During the lens center positioning after turning on the power.
During the Update Firmware.
During initializing after pushing CLEAR SETTING button.
During getting the IP address from the DHCP server.
Because of the internal failure of Network Camera. Refer to page 111.
Fixed Focus Lens and...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                  15
1.3.2 Rear View
Ethernet Indicator
Ethernet Indicator turns on when the network is active. It flickers when Network 
Camera is sending and receiving the data.
1.3.3 Bottom View
External I/O
(Refer to page 94.)
Ethernet port
(RJ-45)
(Refer to page 20.)
DC IN jack
(Refer to page 20.)
Ethernet Indicator
(Refer to page 20.)
Hook for AC
adaptor cord
(Refer to page 20.)CLEAR SETTING button
(Refer to page...

Operating Instructions
16
Section 2
Network Camera Setup 

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                  17
2.1 Installation Procedure
Select the Network Camera configuration type. (Page 18—Page 19)
Connect Network Camera for installation. (Page 20)
Prepare the network parameters for Network Camera. (Page 21—Page 22)
Check the proxy server setting. (Page 26—Page 27)
Set up Network Camera with Setup CD-ROM. (Page 28—Page 31)
Confirm the Network Camera Access from the Internet. (Page 32—Page 33)
Mount Network...

Operating Instructions
18
2.2 Network Camera Configuration Type
Network Camera can be connected over the LAN/Intranet and the Internet. Select 
from the four Network Camera configuration types. Network parameters differ 
depending on the Network Camera configuration type.
[Type 1]—LAN/Intranet Connection with an Ethernet 
Switching Hub
Network Camera can be installed on the LAN/Intranet. 
*
1 Network traffic can be improved by using the Ethernet switching hub.
[Type 2]—Internet Connection with a...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                  19
[Type 3]—Internet Direct Connection with a Modem
Network Camera can be installed alone without PC on the network. When you set 
up Network Camera in [Type 3], connect Network Camera temporarily in [Type 
1], [Type 2] or [Type 4].
Note
Some xDSL services use PPPoE. Network Camera does not support PPPoE. 
If the Internet connection requires PPPoE, connect with the broadband router 
supporting PPPoE like...

Operating Instructions
20
2.3 How to turn on Network Camera for 
Installation
Connect the DC plug of the AC adaptor to the DC IN jack and a category 5 straight/
cross cable to the Ethernet port. Connect the AC plug of the AC adaptor to the 
power outlet to turn on Network Camera. Pan/Tilt moves to the center position. 
Ethernet Indicator turns on when the network is active.
Notes
AC adaptor is used as the main disconnect device, so ensure that the 
power outlet is located/installed near the equipment...