Panasonic Network Camera Kx Hcm10 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                  71
Over write setting: 
Selects [Over Write...] to overwrite the transferred image or [Add 
time...] to save each transferred image.
Data transfer method: 
Use [Passive Mode] normally. If FTP does not work properly, ask your 
ISP or network administrator about the transferring mode of FTP 
server. [Passive Mode] or [Active Mode] is available.
b.Mail: Sets the SMTP and POP3 server address*1 or Host...

Operating Instructions
72
Setting Example
b.a.
c.
d.
e.
f. 

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                  73
Setting explanation
a.The active time of trigger is set between 9:00 AM to 6:00 PM from 
Monday to Friday. 
When the alarm occurs in the setting time, the images are transferred 
to FTP server, and the notification is sent to the specified user via e-
mail.
The alarm trigger is on when the sensor signal is changed to the 
[Rising] (GND to Open High) of External Sensor Input of External I/O.
b.The...

Operating Instructions
74
Transfer in the Timer Mode
The timer mode can be activated by entering the active time, the image setting, 
frequency setting and the transfer method on Image Transfer window. Buffered 
Image can also be transferred via e-mail or FTP. The timer mode uses the Network 
Camera internal clock. Make sure Date and Time has been configured. Refer to 
page 58 about Date and Time.
1.Click [Timer] on Image Transfer window.
b.
c.
d.
e. a. 

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                  75
Instructions for the data fields
a.Buffers or transfers by the timer trigger.
b.Active Time of Trigger
Always: always activates the timer trigger. The timer trigger interval 
can be set in e. Image Buffer Frequency Setting. 
Operational between: Sets the start and stop time of the primary time. 
The day of the week can be set by checking. If the setting time passes 
over midnight, check the check box...

Operating Instructions
76
a.Selects Transfer Method.
Non Transfer without Memory Over Write: 
Image buffering will stop when the internal memory is full.
Non Transfer with Memory Over Write: 
Buffered image will overwrite the older image data when the internal 
memory is full.
[Primary] or [Secondary] on the operation bar can be displayed to 
view the Buffered Image screen in Non Transfer setting. 
FTP: Enters the server address*
1 or Host Name*2, Port Number (1—
65535), Login ID*2 and password*2 to...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                  77
Over write setting: 
Selects [Over Write...] to overwrite the transferred image or [Add 
time...] to save each transferred image.
Data transfer method: 
Use [Passive Mode] normally. If FTP does not work properly, ask your 
ISP or network administrator about the transferring mode of FTP 
server. [Passive Mode] or [Active Mode] is available.
b.Mail: Sets the SMTP and POP3 server address*1 or Host...

Operating Instructions
78
3.5.8 Camera Setup
Camera Setup window sets White Balance and Power Line Frequency. You can 
lock the Brightness, Pan/Tilt/Preset and Preset Program Control features. You can 
also select the Pan Range and Tilt Range.
1.Click [Camera Setup] on Setup Page.
2.Select the each parameter in the proper data field. Click [Save] when finished.
•Click [Cancel] to quit the current settings. The window returns to Setup 
Page without saving the parameters.
Instructions for the data fields...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                  79
Instructions for the data fields
White Balance Notes
•The wrong White Balance setting will cause Network 
Camera to display colors improperly. In most cases Auto is 
suggested.
•White Balance is also registered in preset programming.
Power Line 
FrequencyIt can select Flicker Correction by power line frequency.
• 60 Hz (default) • 50 Hz
Select 60 Hz in the United States.
Brightness 
ControlBrightness...

Operating Instructions
80
Specifying the Pan/Tilt range
1.Start up the web browser and access the Single Camera screen.
2.Start up another web browser and access Camera Setup window.
3.Align the Single Camera screen and Camera Setup window from side to side.
4.Adjust the Pan operation on the Single Camera screen and select [Current] in 
the minimum value data field of the Pan range on Camera Setup window. The 
data field refreshes to read the current value of the Pan range.
5.Specify the each home...