Panasonic Network Camera Kx Hcm10 Operating Instructions
Here you can view all the pages of manual Panasonic Network Camera Kx Hcm10 Operating Instructions . The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 81
![Page 81
Operating Instructions
[For assistance, please call: 1-800-272-7033] 81
3.5.9 Multi-Camera
Multi-Camera window enables the setting of Multi-Camera screen. Camera
Name and IP address of each Network Camera must be entered to view the Multi-
Camera screen. Registering IP addresses of the other Network Camera enables
you to view on the Multi-Camera screen. Clicking Camera Name of Network
Camera on the Multi-Camera screen accesses the Single Camera screen to
control the...](http://img.usermanuals.tech/thumb/58/66635/w300_kx-hcm10_en_om_d-80.png "Page 81
Operating Instructions
[For assistance, please call: 1-800-272-7033] 81
3.5.9 Multi-Camera
Multi-Camera window enables the setting of Multi-Camera screen. Camera
Name and IP address of each Network Camera must be entered to view the Multi-
Camera screen. Registering IP addresses of the other Network Camera enables
you to view on the Multi-Camera screen. Clicking Camera Name of Network
Camera on the Multi-Camera screen accesses the Single Camera screen to
control the...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 81 3.5.9 Multi-Camera Multi-Camera window enables the setting of Multi-Camera screen. Camera Name and IP address of each Network Camera must be entered to view the Multi- Camera screen. Registering IP addresses of the other Network Camera enables you to view on the Multi-Camera screen. Clicking Camera Name of Network Camera on the Multi-Camera screen accesses the Single Camera screen to control the...
Page 82
![Page 82
Operating Instructions
82
2.Select/Enter the each parameter. Click [Save] when finished.
•Click [Cancel] to quit the current settings. The window returns to Setup
Page without saving the parameters.
*
1 Refer to IP addressing on page 96.
*
2 Refer to unavailable character set 1 on page 96 but [:] is available.
*
3 Refer to unavailable character set 1 on page 96 and refer to displayable
character set on page 97.Instructions for the data fields
Enable check boxThe checked camera image can be seen on the...](http://img.usermanuals.tech/thumb/58/66635/w300_kx-hcm10_en_om_d-81.png "Page 82
Operating Instructions
82
2.Select/Enter the each parameter. Click [Save] when finished.
•Click [Cancel] to quit the current settings. The window returns to Setup
Page without saving the parameters.
*
1 Refer to IP addressing on page 96.
*
2 Refer to unavailable character set 1 on page 96 but [:] is available.
*
3 Refer to unavailable character set 1 on page 96 and refer to displayable
character set on page 97.Instructions for the data fields
Enable check boxThe checked camera image can be seen on the...")
Operating Instructions 82 2.Select/Enter the each parameter. Click [Save] when finished. •Click [Cancel] to quit the current settings. The window returns to Setup Page without saving the parameters. * 1 Refer to IP addressing on page 96. * 2 Refer to unavailable character set 1 on page 96 but [:] is available. * 3 Refer to unavailable character set 1 on page 96 and refer to displayable character set on page 97.Instructions for the data fields Enable check boxThe checked camera image can be seen on the...
Page 83
![Page 83
Operating Instructions
[For assistance, please call: 1-800-272-7033] 83
3.5.10 External Output Control
External Output Control window enables the External Device Control Output
signal to activate the external sensors/devices. (Open or Short to GND) The
network administrator should set up this setting.
Note
Refer to page 94 for Interfacing to the External I/O.
1.Click [External Output Control] on Setup Page.
2.Check [Open] means the External Device Control Output...](http://img.usermanuals.tech/thumb/58/66635/w300_kx-hcm10_en_om_d-82.png "Page 83
Operating Instructions
[For assistance, please call: 1-800-272-7033] 83
3.5.10 External Output Control
External Output Control window enables the External Device Control Output
signal to activate the external sensors/devices. (Open or Short to GND) The
network administrator should set up this setting.
Note
Refer to page 94 for Interfacing to the External I/O.
1.Click [External Output Control] on Setup Page.
2.Check [Open] means the External Device Control Output...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 83 3.5.10 External Output Control External Output Control window enables the External Device Control Output signal to activate the external sensors/devices. (Open or Short to GND) The network administrator should set up this setting. Note Refer to page 94 for Interfacing to the External I/O. 1.Click [External Output Control] on Setup Page. 2.Check [Open] means the External Device Control Output...
Page 84
Operating Instructions 84 3.5.11 Indicator Control Indicator Control window allows you to select Power Indicator operation. Power Indicator operation has three patterns. •Always on •Turns on when accessing Network Camera •Always off Notes •Power Indicator can be controlled in case the administrator does not want to draw attention to Network Camera. This may be desirable when used for security applications. •Indicator Control window cannot control Ethernet Indicator on page 15. 1.Click [Indicator...
Page 85
![Page 85
Operating Instructions
[For assistance, please call: 1-800-272-7033] 85
3.5.12 Status
Status displays general information about Network Camera.
Note
When some trouble occurs, the information is useful.](http://img.usermanuals.tech/thumb/58/66635/w300_kx-hcm10_en_om_d-84.png "Page 85
Operating Instructions
[For assistance, please call: 1-800-272-7033] 85
3.5.12 Status
Status displays general information about Network Camera.
Note
When some trouble occurs, the information is useful.")
Operating Instructions [For assistance, please call: 1-800-272-7033] 85 3.5.12 Status Status displays general information about Network Camera. Note When some trouble occurs, the information is useful.
Page 86
![Page 86
Operating Instructions
86
3.5.13 Restart
Restart window restarts Network Camera with the parameters saved. Restarting
is required when the network parameters are changed.
1.Click [Restart] on Setup Page.
2.Click [Restart Now!].
•Click [Cancel] to quit. The window returns to Setup Page.](http://img.usermanuals.tech/thumb/58/66635/w300_kx-hcm10_en_om_d-85.png "Page 86
Operating Instructions
86
3.5.13 Restart
Restart window restarts Network Camera with the parameters saved. Restarting
is required when the network parameters are changed.
1.Click [Restart] on Setup Page.
2.Click [Restart Now!].
•Click [Cancel] to quit. The window returns to Setup Page.")
Operating Instructions 86 3.5.13 Restart Restart window restarts Network Camera with the parameters saved. Restarting is required when the network parameters are changed. 1.Click [Restart] on Setup Page. 2.Click [Restart Now!]. •Click [Cancel] to quit. The window returns to Setup Page.
Page 87
![Page 87
Operating Instructions
[For assistance, please call: 1-800-272-7033] 87
3.5.14 Update Firmware
Update Firmware window allows the user to install the latest version of the
Network Camera internal operating system. In most cases, this will never be
necessary. Changes may be necessary to accommodate new operating systems
or new web browsers that are not shown on page 10. In those cases, Update
Firmware would be available from the Network Camera Technical Support Site at...](http://img.usermanuals.tech/thumb/58/66635/w300_kx-hcm10_en_om_d-86.png "Page 87
Operating Instructions
[For assistance, please call: 1-800-272-7033] 87
3.5.14 Update Firmware
Update Firmware window allows the user to install the latest version of the
Network Camera internal operating system. In most cases, this will never be
necessary. Changes may be necessary to accommodate new operating systems
or new web browsers that are not shown on page 10. In those cases, Update
Firmware would be available from the Network Camera Technical Support Site at...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 87 3.5.14 Update Firmware Update Firmware window allows the user to install the latest version of the Network Camera internal operating system. In most cases, this will never be necessary. Changes may be necessary to accommodate new operating systems or new web browsers that are not shown on page 10. In those cases, Update Firmware would be available from the Network Camera Technical Support Site at...
Page 88
![Page 88
Operating Instructions
88
4.Click [Update Firmware] on Setup Page.
5.Click [Update Firmware].
Wait about one minute.
Note
If you click [Update Firmware], operation cannot be canceled. If canceled,
refer to page 112.](http://img.usermanuals.tech/thumb/58/66635/w300_kx-hcm10_en_om_d-87.png "Page 88
Operating Instructions
88
4.Click [Update Firmware] on Setup Page.
5.Click [Update Firmware].
Wait about one minute.
Note
If you click [Update Firmware], operation cannot be canceled. If canceled,
refer to page 112.")
Operating Instructions 88 4.Click [Update Firmware] on Setup Page. 5.Click [Update Firmware]. Wait about one minute. Note If you click [Update Firmware], operation cannot be canceled. If canceled, refer to page 112.
Page 89
![Page 89
Operating Instructions
[For assistance, please call: 1-800-272-7033] 89
6.Click [Browse...] to select the firmware from the file selector.
•A dialog box appears to choose the file.
7.Select a desired Firmware file (including the path information) and click
[Open].
8.Make sure the desired firmware file name is selected correctly, and click
[Update Firmware].
Restarting window is displayed, and Network Camera restarts
automatically.
Restart operation takes about one...](http://img.usermanuals.tech/thumb/58/66635/w300_kx-hcm10_en_om_d-88.png "Page 89
Operating Instructions
[For assistance, please call: 1-800-272-7033] 89
6.Click [Browse...] to select the firmware from the file selector.
•A dialog box appears to choose the file.
7.Select a desired Firmware file (including the path information) and click
[Open].
8.Make sure the desired firmware file name is selected correctly, and click
[Update Firmware].
Restarting window is displayed, and Network Camera restarts
automatically.
Restart operation takes about one...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 89 6.Click [Browse...] to select the firmware from the file selector. •A dialog box appears to choose the file. 7.Select a desired Firmware file (including the path information) and click [Open]. 8.Make sure the desired firmware file name is selected correctly, and click [Update Firmware]. Restarting window is displayed, and Network Camera restarts automatically. Restart operation takes about one...
Page 90
![Page 90
Operating Instructions
90
3.5.15 Reset to Factory Default
Reset to Factory Default window initializes all the parameters including the ID,
Password, IP address and Subnet Mask except Date and Time setting to the
factory default. Reconfirm the settings before doing the Reset to Factory Default
operation.
1.Click [Reset to Factory Default] on Setup Page.
2.Click [Execute].
•Click [Cancel] to quit. The window returns to Setup Page.
Notes
•Do not turn off the power during the Reset to Factory Default. It...](http://img.usermanuals.tech/thumb/58/66635/w300_kx-hcm10_en_om_d-89.png "Page 90
Operating Instructions
90
3.5.15 Reset to Factory Default
Reset to Factory Default window initializes all the parameters including the ID,
Password, IP address and Subnet Mask except Date and Time setting to the
factory default. Reconfirm the settings before doing the Reset to Factory Default
operation.
1.Click [Reset to Factory Default] on Setup Page.
2.Click [Execute].
•Click [Cancel] to quit. The window returns to Setup Page.
Notes
•Do not turn off the power during the Reset to Factory Default. It...")
Operating Instructions 90 3.5.15 Reset to Factory Default Reset to Factory Default window initializes all the parameters including the ID, Password, IP address and Subnet Mask except Date and Time setting to the factory default. Reconfirm the settings before doing the Reset to Factory Default operation. 1.Click [Reset to Factory Default] on Setup Page. 2.Click [Execute]. •Click [Cancel] to quit. The window returns to Setup Page. Notes •Do not turn off the power during the Reset to Factory Default. It...